Sargent & Lundy

Manager

• Track Deliveries: Ensures that all incoming materials are accounted for and arrive as scheduled.
• Unload and Sort Material: Oversee the organization and layout of materials for use to maximize accessibility and efficiency.
• Communicate Any Damaged Materials: Inspect major equipment deliveries for defects, thoroughly document, and communicate in a timely manner.
• Prepare Material for Construction: Group materials needed for specific tasks, streamlining the workflow for construction teams.
• Track and Confirm Invoices: Verify that deliveries match invoices, maintaining financial accuracy and accountability.
• Track Material Taken by Contractors: Monitor usage to ensure materials are only used as planned and prevent shortages and missing materials.
• Communicate Any Shortage in Materials: Quickly addressing shortages, preventing costly project delays.
• Participate in Material Update Meetings: Provide real-time updates on inventory, adjustments, and requirements, enhancing coordination.
• Participate in Overall Project Update Meetings: Ensure alignment with broader project goals and enables proactive problem-solving.
• Keep all documentation up to date for internal and external project members.
• Ensure the job site remains safe, clean, and orderly.
• Ensure compliance with safety, health, and quality standards.

Material Manager – Field Assignment

Civil Engineer

• Guide a team of structural engineers
• Interface with engineers from other disciplines and clients
• Lead and mentor a structural engineering team on projects for new nuclear facilities and upgrades to power plants
• Prepare, review, and provide guidance for design calculations
• Develop specifications and work with designers for drawing development
• Prepare, review, or guide the structural analysis and design of steel frames, connections, concrete members, and foundations
• Potential for travel to client and vendor offices for design reviews and construction coordination

Structural Engineering Consultant 2 – Nuclear

• Oversee assigned projects' field operations/installation side to ensure equipment is installed safely, accurately, completely, and within the estimated timeline.
• Provide oversight of a Solar PV Project for specific construction contractor and sub-contractor activities.
• Review/Create project-specific site work plans.
• Prepare and review various reports, including construction and quality surveillance, source inspections, and certified material tests.
• Troubleshoot issues that arise during construction activities and provide resolution.
• Conduct quality control visits to project sites.
• Communicate with subcontractors regarding installation information and timeline during installation.
• Ensure that the client's monitoring portal is created and functioning correctly.
• Lead and attend contractor performance review and coordination meetings.

Solar PV Construction Site Manager – Field Assignment

Engineer

• Design transmission lines in the 69kV to 500kV range
• Conduct cost analyses and develop design criteria
• Work with vendors and clients on specifications
• Mentor less experienced staff and interact with diverse clients

Senior Transmission Line Engineer – Part-Time

Analyst

• Supporting project development and strategic planning, including market, technology, and policy assessments
• Leading and contributing to project economic and cost analyses, risk assessments, and contracting strategies
• Supporting or managing technical due diligence and owner’s engineering reviews for power and energy projects
• Providing client program and project management support, including improving governance, business processes, controls, and stakeholder alignment
• Developing conceptual plans in coordination with Sargent & Lundy’s technical teams
• Preparing and presenting project implementation strategies and plans to client executives and project teams
• Translating complex technical findings into clear, client-ready deliverables, including presentations and written reports
• Leading discrete workstreams within larger client engagements
• Coordinating day‑to‑day activities of junior team members and review their work products
• Contributing to business development, including proposal preparation and client relationship building

Manager/Consulting Analyst – Part-Time

Designer

• Prepare design deliverables in CAD (e.g., physical layouts and sections; civil grading and drainage plans; structural steel/concrete layouts and details; mechanical equipment layouts, piping GAs/isometrics/supports; and single line/wiring/schematic drawings and related documents).
• Use tools such as AutoCAD, MicroStation, Civil 3D, Navisworks, and other 3D design software to draft, check, and revise designs, including bills of material and associated documentation.
• Interpret and incorporate information from engineers, vendor drawings, specifications, standards, and topographic/field data into coordinated design deliverables.
• Identify and help resolve design issues (interferences, grading conflicts, system layout problems, wiring inconsistencies, etc.) and support clash/coordination reviews across disciplines.
• Perform thorough self-checks of drawings, apply client and company standards consistently, and ensure completeness, accuracy, and constructability of issued deliverables.
• Support and sometimes lead field activities such as walkdowns and data gathering at client facilities, and update designs based on field conditions.
• Collaborate closely with engineers and designers from other disciplines, communicate progress and issues, and help maintain project schedules and priorities.
• Maintain and grow practical knowledge of engineering and design principles, including the ability to visualize parts and systems in 3D and relate equipment, wiring, and structures to the overall plant or substation design.

Senior CAD Designer – Part-Time

• Perform System Scoping, Screening, and Aging Management Review of nuclear plant systems in support of SLR applications in accordance with NEI 17-01 and current industry best practices
• Collaborate with engineering and regulatory teams to ensure compliance with NRC regulations and license extension commitments
• Perform engineering program basis documentation, data validation, engineering change tracking, and configuration control
• Roadmap required inspections to comply with NRC regulations and license renewal commitments
• Review inspection work orders to ensure license renewal criteria is met
• Interact with clients and/or NRC in a technical expert role
• Maintain awareness of changes in aging management regulations, approaches, techniques, and operating experience
• Foster a culture of continuous improvement, technology forward, and cross-functional collaboration

License Renewal Engineer Consultant 2 – Electrical, Nuclear

• Perform structural engineering reviews and analyses
• Prepare structural design specifications
• Advise power project developers to support new utility-scale solar, wind, battery energy storage, thermal, and other projects
• Evaluate new power and infrastructure projects independently to support financing
• Develop technical reports for applicable audiences

Structural Engineering Consultant – Part Time

Mechanical Engineer

• Develop and lead licensing basis system and component evaluations for nuclear power uprate projects.
• Perform consulting level work for power uprates in the nuclear industry.
• Prepare and review calculations related to heat balances, power train pumps, heat exchangers, condenser/heat sink, and plant hazards to support client recommendations and reviews.
• Prepare task reports and equipment evaluations that present technical information in a clear and concise manner to meet client requirements.
• Perform equipment sizing, optimization evaluation, and selection in response to client needs to support the proposed power uprate.
• Interface with clients and project teams to present technical discussions and project status.
• Develop engineering proposals and cost estimates.
• Lead and mentor junior engineering staff on power plant engineering technical tasks.
• Perform independent reviews of work performed by others including calculations and drawing preparation.
• Attend client meetings and site walkdowns to validate scope and ensure client satisfaction.

Lead Mechanical Engineer – Nuclear Plant Analysis

Security Engineer

• Reviewing Critical Digital Asset (CDA) determinations and assessments for technical accuracy.
• Addressing related plant corrective actions and notifications.
• Confirming the configuration of devices installed at the site based on network diagrams and system documentation.
• Supporting installation of software and hardware on plant digital systems.
• Performing tasks for changing device settings to implement cyber security controls.
• Performing technical supports requested by the Digital Engineering and Cyber Security supervisors.
• Performing other tasks as related to Cyber Security.

Lead Cyber Security Engineer – Nuclear

• This position will offer you the ability to directly apply your knowledge of materials, structural analysis, structural steel design, and reinforced concrete design.
• As a member of an engineering and design team, you will work on a wide range of power transmission modifications and upgrades to support client recommendations and reviews including creating calculations, design documents and specifications.
• You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of structural engineering issues.
• You will perform structural analysis and detailed design of steel frames, connections, concrete members, equipment, and foundations.
• Develop integrated structural designs and perform supporting calculations for the planned work.
• You will have direct interface with the client and communicate technical information.
• You will prepare technical specifications for structural materials.
• You will perform independent reviews of work performed by others, including calculations and drawing preparation.
• Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design.
• Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.
• You will develop your career via peer-learning through sharing of knowledge with other experienced engineers.

Lead Structural Engineer – Grid

• Work in a project team environment in the design, modification, and/or upgrade of new and existing power plant electrical systems
• Produce electrical wiring drawings, and review and incorporate vendor drawings into the overall project design
• Develop single-line diagrams, relay and metering diagrams, AC and DC schematic diagrams, synchronizing diagrams, point-to-point wiring diagrams, and cable schedules
• Accompany and assist in field walkdowns and data gathering at client facilities
• Capable of being badged for unescorted access to a nuclear station.

Senior Electrical Wiring Designer – Nuclear Power

Electrical Engineer

• Prepare and review engineering design change packages to install, replace or upgrade existing plant equipment to ensure long-term equipment reliability
• Prepare and review detailed engineering calculations in support of design change packages, including AC and DC power studies, short circuit, cable ampacity, voltage drop, breaker coordination, motor starting and protective relay settings
• Prepare and review equipment procurement specifications
• Participate in bid review evaluation process for potential equipment vendors, to include supporting vendor requests for additional information, developing responses to vendor questions, and maintaining a tracking mechanism for questions/responses
• Prepare and review scoping documents for conceptual designs, to include constructability reviews
• Interface with project team members from other engineering and design disciplines (Mechanical, Structural, Civil, I&C)
• Interface with the client in support of the project, including implementing personnel
• Interface with vendors to perform document reviews and provide written comment
• Attend client meetings and site field walkdowns to validate scope and ensure client satisfaction
• Travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs
• Support site installation activities during project implementation
• Assist the S&L project manager to ensure projects are completed satisfactorily, on time, and within budget
• Responsible for overall technical, financial, and administrative performance of the engineering scope by: Initiating and conveying scope of work to project team members, Defining deliverables (i.e. calcs, specs, drawings, design change etc…) Reviewing status and tracking progress of team members to maintain project scope/budget and keep client informed, Routine status meetings, Submitting progress reports Tracking and resolving open items and emergent project issues, Coordinating completion of project deliverables

Senior Electrical Engineer – Nuclear

• This position allows for a remote work schedule spent working from home.
• Offer the opportunity to work in a project team environment with engineers and other Electrical and Structural designers and/or engineers in the development of transmission/distribution line drawings/designs.
• Apply your computer-aided drafting/design skills, while receiving hands-on training in 3D design software environments, such as AutoCAD 3D and/or MicroStation.
• Development of transmission line plans and profile drawings, transmission/distribution line hardware details, material lists, and grounding details.
• Creating master sketches to scale showing relation of proposed installations to existing facilities and exact specifications and dimensions.
• Confer directly with engineering staff in interpreting input from a variety of sources, such as engineering specifications, weight and volume calculations, and stress factors.
• Accompany and assist other project team members on walkdowns at client facilities to gather information for your design project.
• Interfacing with vendors and construction contractors, explaining your drawings so appropriate design adjustments can be made.

Senior Transmission Line Designer – Grid

Consultant

• In this role, you will provide development support, strategic planning, expert consulting, conceptual design and engineering design oversight within the SLC project portfolio in support of power projects.
• You will also have the opportunity to support and lead project economic and cost analysis, risk assessments, and contracting strategies.
• Your responsibilities will include preparing project implementation strategies and plans, expert consulting, owner’s engineering reviews, technical due diligence, process improvement evaluations, project development support, and conceptual planning.