Field Engineer

• Ensure optimal performance and reliability of medical equipment by delivering high-quality service
• Install, service, and maintain medical equipment including patient handling systems, beds, and hygiene solutions
• Perform preventive maintenance and attend breakdown calls to ensure maximum equipment uptime
• Diagnose and repair faults, including basic electronic, PCB, and component-level troubleshooting
• Promote and drive AMC/CMC contracts to support recurring service revenue
• Provide technical and operational support to hospital staff, caregivers, and channel partners
• Maintain accurate service reports, documentation, and system updates
• Coordinate with internal teams for spare parts, logistics, and escalations
• Ensure compliance with safety, quality, and regulatory standards during all service activities

Service Engineer

🌐
Worldwide
❌ Jobs You've Hidden
⭐️ Saved Jobs
✅ Applied Jobs
✉️ Email Alerts
👤 Account
This job opening is no longer available.
Similar Jobs
Field Service Engineer

🕒 April 17

Biotage

501 - 1000

🧬 Biotechnology

💊 Pharmaceuticals

🔬 Science

Website
LinkedIn
All Job Openings

Field Service Engineer responsible for installing and troubleshooting Biotage instruments in North India. Engaging with customers and providing technical support as needed.

🇮🇳 India – Remote

⏰ Full Time

🟡 Mid-level

🟠 Senior

🔧 Field Service Engineer

Field Service Engineer

🕒 April 17

Biotage

501 - 1000

🧬 Biotechnology

💊 Pharmaceuticals

🔬 Science

Website
LinkedIn
All Job Openings

Field Service Engineer role at Biotage installing, maintaining, and troubleshooting scientific instruments. Engaging with customers while adapting to new technologies and training users.

🇮🇳 India – Remote

⏰ Full Time

🟡 Mid-level

🟠 Senior

🔧 Field Service Engineer

Field Service Engineer

🕒 April 17

Shape Technologies Group

1001 - 5000

🚀 Aerospace

🔧 Hardware

🤝 B2B

Website
LinkedIn
All Job Openings

Field Service Engineer providing technical support and installations for Flow products at customer locations. Requires travel and technical expertise in Electronics and Robotics.

🇮🇳 India – Remote

⏰ Full Time

🟡 Mid-level

🟠 Senior

🔧 Field Service Engineer

Field Service Engineer – Flow

🕒 April 17

Flow International

501 - 1000

🔧 Hardware

🤝 B2B

Website
LinkedIn
All Job Openings

Field Service Engineer planning and supervising installations of Flow products while providing technical support. Involves travel to customer sites and requires expertise in mechanical and electrical systems.

🇮🇳 India – Remote

⏰ Full Time

🟡 Mid-level

🟠 Senior

🔧 Field Service Engineer

Customer Service Engineer

🕒 April 7

GE HealthCare

10,000+ employees

💊 Pharmaceuticals

Website
LinkedIn
All Job Openings

Customer Service Engineer responsible for maintaining Ultrasound Modality equipment at GE HealthCare. Involves troubleshooting, reporting, and collaborating with teams for effective service delivery.

🇮🇳 India – Remote

⏰ Full Time

🟡 Mid-level

🟠 Senior

🔧 Field Service Engineer

Search More Field Service Engineer Jobs
🌐
Worldwide
Built by Lior Neu-ner. I'd love to hear your feedback — Get in touch via DM or support@remoterocketship.com
Search
Search Jobs by country
Search jobs by city
Search jobs by job title
Search entry-level jobs
Search junior-level jobs
Search senior-level jobs
Search jobs by tech stack
Search jobs by contract type
Search remote internships
Search remote part-time jobs
Remote jobs Anywhere in the World
Companies Hiring Anywhere in the World
Companies Hiring Sales People Anywhere in the World
Companies Hiring Software Engineers Anywhere in the World
Resources
Advice
Tips for finding remote jobs
Interview questions and answers
Resume examples
Cover letter examples
Post a job
Affiliates
Privacy policy
Terms of service
Job board SEO course
AI Apply Copilot
OpenClaw job finder
Jobs by Country
Remote jobs anywhere in the world (Worldwide remote jobs)
Remote jobs United States
Remote jobs Australia
Remote jobs Brazil
Remote jobs Canada
Remote jobs France
Remote jobs Ireland
Remote jobs Germany
Remote jobs Netherlands
Remote jobs Spain
Remote jobs UK
Popular Jobs
Remote data analyst jobs
Remote customer support jobs
Remote executive assistant jobs
Remote marketing jobs
Remote product designer jobs
Remote product manager jobs
Remote project manager jobs
Remote recruiter jobs
Remote sales jobs
Remote software engineer jobs
Jobs by Type
Remote full-time jobs
Remote part-time jobs
Remote contract jobs
Remote internship jobs
Remote entry-level jobs
Remote jobs with no experience required
Remote junior jobs (1-3 years of experience)
Digital nomad jobs
Remote jobs with no degree required
Freelance remote jobs
Temporary remote jobs
Remote jobs hiring now
Stay at home mom jobs

Senior Service Engineer

• Deliver technical support and maintenance services including troubleshooting, repairs, and installations.
• Document detailed service activities and prepare for service visits to achieve first-visit resolution.
• Address customer escalations and feedback and execute moderately complex service tasks in the field.
• Ensure compliance of Service Delivery Processes and deliver services effectively and efficiently.
• Participate in Corrective Maintenance and complete the PM schedules within the stipulated time frame.
• Implement FCOs of the respective modalities and act as a support resource to other FSEs for their implementation.
• Report necessary information both technical and administrative as per the norms to the concerned Modality Leader and Territory Manager.
• Coordinate the process of Spare parts Sales with the Customer assisting the Territory Manager, Operations Manager, and CS Sales Support.
• Identify opportunities for System Upgrades and promote them to the Customer.

Field Service Engineer

• Troubleshooting and resolving complex technical issues in area of specialty
• Identifying and implementing process and efficiency improvements in favor of change safety
• Improving tools, alerts, documentations, and procedures in favor of change safety
• Maintaining positive relationships across the teams
• Collaborating with our global Change Safety Deployment team to maintain consistent workflows across the group

Production Service Engineer II

• Provide onsite technical service support to customers, including installation, preventive maintenance, breakdown resolution, and customer training
• Support service revenue growth through promotion of service contracts, consumables, and identification of upgrade or replacement opportunities
• Attend and resolve customer equipment breakdowns within the assigned region
• Install, commission, and maintain Videojet equipment at customer sites
• Perform preventive maintenance as per defined schedules
• Diagnose technical issues and provide effective corrective actions
• Raise spare part requests and close service transactions under warranty, CAMP, or chargeable services
• Promote service contracts and consumables to customers
• Conduct product demonstrations and provide operator-level customer training
• Prepare and update service reports in Oracle
• Identify potential spare parts and equipment requirements, submit quotations, and collect purchase orders
• Generate service leads for the sales team related to equipment upgrades or replacements.

• Install, commission, repair, maintain, and upgrade TOMRA sorting systems at customer sites
• Troubleshoot electrical and mechanical issues independently and perform root cause analysis
• Provide technical support on-site and remotely to minimize machine downtime
• Train customer operators and maintenance teams on machine usage and maintenance procedures
• Build strong customer relationships through professional communication and reliable support
• Document service activities and provide detailed service reports
• Ensure full compliance with Health & Safety standards during all service activities
• Collaborate closely with internal Service, Technical Support, Engineering, and Sales teams
• Travel extensively across India and selected APAC regions (up to 80%)

• Execute service work of medium to high complexity as per work instructions and ABB guidelines
• Deliver excellent customer service to satisfy customers
• Identify opportunities in the installed base to improve system performance and operational performance
• Plan and execute service work as per customer order and expectations
• Ensure customer retention by delivering superior customer experience and communicating service work timeline and expectations
• Coach technicians and engineers and supervise complex site activities

• Maintaining all models specific to MR Modality Equipment in the assigned area.
• Total system level troubleshooting on complex multi-symptom problems.
• Completing all administration tasks on time.
• Ensures timely completion of FMIs (Field Modification Instructions) and PMS (Prevent to Maintains Service) inspections documentation for assigned accounts.
• Developing conceptual knowledge of professional discipline.
• Resolving issues using established procedures.
• Collaborating with others to solve issues.

Customer Service Engineer

• Demonstrates strong technical knowledge of jobs, sites, and turbine operations while maintaining daily contact with all local technicians.
• Takes full ownership of the assigned sub-area and is responsible for overall area performance.
• Maintains a high customer-focused approach by promoting quality behavior, responsibility, and an efficient workforce.
• Ensures a strong safety and quality mindset within Vestas teams and external service providers at all times.
• Performs daily area management activities to monitor progress, safety, and quality.
• Verifies that all subcontractor safety documentation and equipment certifications are valid and up to date.
• Ensures that approved lifting plans and valid Permits to Work are in place before task execution.
• Acts as a role model for technicians by demonstrating leadership, professionalism, and safe working behavior.
• Provides coaching and leadership to technicians to improve skills, performance, and accountability.
• Promotes responsibility and accountability for turbine operations and site activities.
• Encourages higher performance expectations by setting clear goals and recognizing achievements or growth opportunities.
• Ensures service orders and work instructions are clearly understood by technicians before work begins.
• Executes all tasks as planned and strictly according to approved procedures and work instructions.

• Installs, debugs and provides technical maintenance for product and component hardware and software.
• Provides scheduled inspection, cleaning and other services and performs minor product repairs within an assigned territory.
• Inspects products for correct operation and resolves noted issues and / or escalates according to established procedure.
• Schedules services and completes all required paperwork.

Associate Field Service Technician

• Provide technical support remotely for HV components of variety of suppliers in service
• Interdisciplinary project work as technical expert to improve the fleet reliability
• Be a leading example in maintaining high standards of HSE and quality
• Prepare and verify technical documentation
• Representing Service interest again suppliers
• Advancement of HV Component trainings
• Troubleshooting of complex failures/areas and also be responsible for RCA

Service Engineering Specialist – Electrical

• Conducts service, repair and/or installation of products or IT solutions at customer site
• Diagnoses system failures and determines most cost-effective solution
• Escalates complex issues to greater level of technical support or quality reporting system
• May develop new customer service/product agreements
• Responds to customer support calls within an assigned territory

• Implement PSS - DeltaV DCS services, including AMC, PWAMC, CAMC, ST100, ST200, ST300, Chargeable Services, Ad hoc services under Lifecycle Services
• Provide system support for DeltaV Systems, DeltaV Batch, DeltaV SIS, DeltaV Charms, DeltaV SIS Charms, VIM, Third-party communications, System Maintenance, and in-house service support
• Support to lifecycle services sales for AMC Renewals, Spares, Add-On, Expansion, Upgrade, Software opportunities
• Delivering services in alignment with SMO Standard
• Will be responsible for managing DeltaV installed base across Central Region
• Will be allocated Active AMC / Service Contracts for Maintenance Contract Execution which will consume 180–190 site visit days annually including travel
• Expected to generate additional revenue by adding new service contracts in the region
• Balancing out current Operational Efficiency of the region
• Service collection target to be achieved

• Ensure execution of roll shop management service contracts at customer site
• Carry out site activities and Maintenance as per scope of work agreed in the contract
• Plan and execute roll shop service activities at the site as per the given planning/customer’s requirement and ensure zero downtime in the mill operation
• Manage team of Shift-in-charges and workers at the site
• Manage bearing servicing area, stand mounting/dismounting, crane operations, and roll CNC grinding operations
• Maintain set system/quality standards—including checklists and service records of all working areas
• Maintain 5S and safety
• Plan the spares required, tools, manpower, etc.
• Create best service provider image for Schaeffler, including mapping customer applications and bearing requirements

Field Service Technician

• Ensure execution of roll shop management service contracts at customer site
• Carry out site activities and Maintenance as per scope of work agreed in the contract
• Plan and execute roll shop service activities as per planning/customer’s requirement
• Manage team of Shift-in-charges and workers at the site
• Manage bearing servicing area, stand mounting/dismounting, crane operations, and roll CNC grinding operations
• Maintain set system/quality standards—checklists and service records of all working areas
• Maintain 5S and safety
• Plan the spares required, tools, manpower, etc.
• Create best service provider image for Schaeffler, including mapping customer applications and bearing requirements

Senior Field Service Technician

• Diagnose, adjust, repair or overhaul port equipment such as harbour mobile cranes, reach stacker, ship cranes, offshore cranes and/or construction machinery such as duty cycle crawler cranes, crawler cranes and foundation equipment.
• Apply electrical, electronically, hydraulically and mechanical theory and related knowledge to test and modify operational electrical machinery and electrical control, electronically control equipment and circuitry, hydraulically circuits and components, mechanical equipment.
• Operate machine for test, inspection, diagnoses and trouble shoot.
• Sets the positive example in punctuality and professional demeanour by respectful communication with all levels of staff, keeping work areas clean and orderly, and promoting safety regulations and all other company programs.
• Test mechanical products and equipment after repair or modification to ensure proper performance and compliance with manufacturer’s specifications.
• Repair and replace damaged or worn parts with Original Equipment Manufacturer (OEM) spares and OEM repaired parts.
• Dismantle and reassemble heavy equipment using hoists and hand tools.
• Clean, lubricate and perform other routine maintenance work on Liebherr machines.
• Examine parts for damage or excessive wear using relevant measuring devices.
• Read, understand, and interpret operating manuals, parts manuals, blueprints and technical drawings.
• Overhaul and test machines or equipment to ensure operating efficiency and safe integrity of the machine.
• Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications.
• Complete assigned paperwork as to procedures. As a minimum time sheet, work report, expense report in the latest available version. Fill out all forms properly including customer’s signature where applicable.
• Oversees the maintenance of quality standards through visual and mechanical inspection methods.
• Promotes a safe work environment by following on site safety rules and ensuring the group and self-follow established safety procedures.
• Oversees the handling and disposing of hazardous wastes, such as toner, oil, anti-freeze, transmission fluid, auto parts cleaner, and similar material.
• Successfully complete factory authorized training. Demonstrate working knowledge of Liebherr Service Software (i.e. Scule and Crane Management software). Prepare for jobs by checking parts and documentation for accuracy and completeness and any possible required online safety courses (i.e. customer specific safety induction, MIST (Minimum Industry Safety Training)).
• Complete jobs independently with as little assistance from others as possible. Assist customers with troubleshooting, part and machine related questions when needed. Attends training sessions as required. Maintains a minimum set of tools and Personal Protective Equipment (PPE) required for job performance. Cares and maintains company tools, machines and equipment. Maintains a positive attitude and role model for the other employees to follow. Maintains company service literature, and maintains a high awareness of technical changes. Assumes the lead person position. Trains and/or mentors others in department. Refuses to carry out unsafe tasks in conflict with Liebherr’s procedures or technical rules. Follows the Liebherr Engineers book and the Liebherr code of conduct. Restrict the tasks that may be assigned.

Service Engineer – Ship Crane, Maritime Cranes

• Diagnose, adjust, repair or overhaul port equipment such as harbour mobile cranes, reach stacker, ship cranes, offshore cranes and/or construction machinery such as duty cycle crawler cranes, crawler cranes and foundation equipment.
• Apply electrical, electronically, hydraulically and mechanical theory and related knowledge to test and modify operational electrical machinery and electrical control, electronically control equipment and circuitry, hydraulically circuits and components, mechanical equipment.
• Operate machine for test, inspection, diagnoses and trouble shoot.
• Test mechanical products and equipment after repair or modification to ensure proper performance and compliance with manufacturer’s specifications.
• Repair and replace damaged or worn parts with Original Equipment Manufacturer (OEM) spares and OEM repaired parts.
• Dismantle and reassemble heavy equipment using hoists and hand tools.
• Clean, lubricate and perform other routine maintenance work on Liebherr machines.
• Examine parts for damage or excessive wear using relevant measuring devices.
• Read, understand, and interpret operating manuals, parts manuals, blueprints and technical drawings.
• Overhaul and test machines or equipment to ensure operating efficiency and safe integrity of the machine.

Service Engineer – Maritime Cranes

• Plan and supervise customers in the execution of field installations of company products.
• Provide technical support and training to customers on the installation, operation, troubleshooting, part identification, and repair of Flow equipment at both the customer’s location and via E-mail, telephone correspondence, fax, etc.
• Produce accurate & detailed technical reports.
• Assist in maintaining relevant technical documentation.
• Work overtime as necessary, sometimes including weekends as per company policy.
• Provide assistance to customer service by determining parts required by a customer.
• Establish and maintain a positive relationship with our distributors and customers while serving as a liaison between the customer and Flow.
• Visit customer locations regularly to audit performance of products and evaluate customer maintenance practices.
• Consult with engineering and other departments about design problems/trend failures; may recommend changes and improvements in products.
• Suggest and make part list of consumable & spares to customer to upkeep company products & generate Aftermarket business.

• Plan and supervise customers in the execution of field installations of company products.
• Provide technical support and training to customers on the installation, operation, troubleshooting, part identification, and repair of Flow equipment at both the customer’s location and via E-mail, telephone correspondence, fax, etc.
• Produce accurate & detailed technical reports.
• Assist in maintaining relevant technical documentation.
• Work overtime as necessary, sometimes including weekends as per company policy.
• Provide assistance to customer service by determining parts required by a customer.
• Establish and maintain a positive relationship with our distributors and customers while serving as a liaison between the customer and Flow.
• Visit customer locations regularly to audit performance of products and evaluate customer maintenance practices.
• Consult with engineering and other departments about design problems/trend failures; may recommend changes and improvements in products.
• Suggest and make part list of consumable & spares to customer to upkeep company products & generate Aftermarket business

See all jobs on JobTailor

Service Engineer

Senior Service Engineer

Field Service Engineer

Production Service Engineer II

Service Engineer

Field Service Engineer

Field Service Engineer

Customer Service Engineer

Service Engineer

Associate Field Service Technician

Service Engineering Specialist – Electrical

Service Engineer

Field Service Engineer

Field Service Technician

Senior Field Service Technician

Service Engineer – Ship Crane, Maritime Cranes

Service Engineer – Maritime Cranes

Field Service Engineer

Field Service Engineer – Flow