Qualus

Software Engineer

• Knowledge of electrical distribution system design engineering standards, practices, and regulatory requirements
• Ability to apply client, industry, and regulatory standards and requirements to existing distribution system components
• Supports the Engineering Manager by handling some of the project assignments and managing project performance and customer relationships for the distribution team
• Problem identification and resolution
• Utilize software such as Distribution Design Studio, Pole Foreman, Design Manager, WMS, and/or AutoCAD in the preparation of project design packages
• Review of completed designs and design products to ensure compliance with client, industry, and regulatory requirements
• Review of design products to ensure compliance with quality and consistency expectations
• Ability to effectively communicate with internal, client, and regulatory counterparts
• Ability to maintain production in a changing environment
• Identify and promote training opportunities.

Engineering Technician II – Distribution

Full-stack Engineer

• Design substations utilizing applicable codes and client standards (if available).
• Typical design to include general arrangement, equipment and electrical layout, elevation views, cable trench, grounding, conduit drawings, details, bills of material, and AC and DC power systems.
• Design ground grids based on applicable codes utilizing industry available software.
• Design lightning protection and grounding plans.
• Complete calculations such as AC and DC load, bus spans, and ampacity calculations.
• Create equipment and material specifications for procurement of engineered equipment as well as development of design scope and cost estimates.
• Complete conceptual designs and layouts for facility planning studies.
• Preparing additional support documentation as needed to assist procurement, construction , and operation/maintenance of systems being designed.
• Direct and/or participate in client meetings/job site visits to collect or deliver design and engineering data.
• Perform/Ensure company’s Quality Assurance/Quality Control (QA/QC) processes are being follow on all design packages.

Senior Engineer – Substation

Operations

• Utilize smartphones and/or tablets to access company systems and for timekeeping.
• Utilize GPS software and/or geospatial coordinates to navigate the assigned territory and client sites.
• Consistently follow safety protocols and participate in all safety initiatives.
• Assist in power restoration efforts in natural disaster events.
• Adhering to all driving laws and regulations.
• Keeping logs of activities, including mileage and fuel consumption.
• Communicating effectively with dispatchers and manage time efficiently to meet schedules.
• Carrying out basic vehicle maintenance tasks, such as checking tire pressure, oil levels, and replenishing fuel.
• Reporting any accidents or damages to the vehicle to the management immediately.
• Willingness to assist in power restoration efforts in natural disaster events.
• Overnight travel may be required periodically.

Operations Driver

Project Manager

• Assists in managing a large portfolio of electric utility projects to ensure all phases of approved projects are completed efficiently and within scope, on schedule, and within budget.
• Works closely with personnel to engineer, design, site, permit and construct assigned projects.
• Assists project managers with securing approval for permits and licenses, budgets materials, contractors, and other resources.
• Overall responsibility for the management of all aspects of assigned projects including managing the development and process for evaluation of bid documents for engineering, design and construction, as well as for the procurement of material and equipment.
• Ensuring all aspects of the projects are documented and completed in accordance with company policies and all regulations and laws.
• Responsible for independently managing smaller projects, demonstrating proficiency in the Project Lifecycle and project controls requirement.

Associate Project Manager

Field Engineer

• Supporting acceptance testing/routine maintenance of Transmission and Distribution substation power equipment
• Relaying (electro-mechanical, solid state, and microprocessor)
• Pilot channel equipment testing
• Verifying all metering (local and SCADA)
• Calibrating all relays
• Trip testing (local and SCADA)
• End-to-end line relay systems
• Applying test procedures for various types of relay test equipment
• Substation awareness and Safety consciousness

Relay Field Engineer I – Relay Boot Camp

• Provide technical capabilities for testing relays, circuit breakers, transformers, motor control equipment, and related switchgear in the field, including synch check, point-to-point
• Perform and lead a crew in the field for testing/maintenance/repair of breakers, transformers, switchgear, motor control and associated equipment
• Ensures proper preparation and documentation for site projects
• Helps evaluate department talent base, identify training needs, and recommend effective action plans for meeting performance expectations
• Identifies and secures equipment needs for shop/field
• Provides daily site summaries for site work in coordination with assigned project manager
• Provides weekly production status reports to project management, operations managers, and Service Assistant
• Maintains an understanding of the technical side of company core business needs
• Attend and contribute to project kickoff meetings
• Support budget adherence on projects
• Continuously instructs and trains others
• Support the sales effort by assisting with labor estimates and job walks when necessary
• Remain current on all safety and technical training

Senior NETA Field Service Technician

Engineer

• Coordinate with Substation Physical Engineering, Relay Settings, and other groups to ensure design concurrence
• Development of complete engineering design packages for protective relaying and communications systems, including one-line diagrams, three-line diagrams, AC schematics, DC schematics, logic and functional diagrams, panel layouts, control house layouts, wiring/connection diagrams, interconnection diagrams, relaying equipment specifications and bill of materials
• Development of SCADA packages, including input / output list (Point Data Sheet)
• Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers
• Developing, nurturing and maintaining trusted relationships with senior level engineers, managers, and executives with current or prospective clients
• Confidently and comfortably present technical solutions to key customers; respond in real time to technical concerns and answer questions in a knowledgeable articulate manner
• Direct and/or participate in client meetings/job site visits to collect or deliver design and engineering data
• Perform/Ensure company’s Quality Assurance/Quality Control (QA/QC) processes are followed on all design packages
• Delegating, planning, prioritizing and reviewing the work of other engineers will be critical.

Senior Protection & Control Engineer

• Design substations utilizing applicable codes and client standards (if available).
• Typical design to include general arrangement, equipment and electrical layout, elevation views, cable trench, grounding, conduit drawings, details, bills of material, and AC and DC power systems.
• Design ground grids based on applicable codes utilizing industry available software.
• Design lightning protection and grounding plans.
• Complete calculations such as AC and DC load, bus spans, and ampacity calculations.
• Create equipment and material specifications for procurement of engineered equipment as well as development of design scope and cost estimates.
• Complete conceptual designs and layouts for facility planning studies.
• Preparing additional support documentation as needed to assist procurement, construction , and operation/maintenance of systems being designed.
• Direct and/or participate in client meetings/job site visits to collect or deliver design and engineering data.
• Perform/Ensure company’s Quality Assurance/Quality Control (QA/QC) processes are being followed on all design packages.

• Design transmission structures and power lines for high voltage applications
• Prepare and review technical specifications and drawings
• Conduct engineering analysis and simulations for transmission line design
• Mentor and train lower-level engineers and team members
• Perform independent reviews of work performed by others, including calculations, drawings, specification, and transmission line PLS-CADD models
• Provide support to the project team during construction and installation
• Collaborate with other engineers and project managers to ensure project goals are met
• Ensure compliance with applicable codes, standards, and regulations
• Perform field work as required to support design, construction, and commissioning activities
• Interface with clients, contractors, and other stakeholders to ensure project success
• Participate in project meetings and provide technical support as required

Lead Engineer – Transmission Line

• Design substations utilizing applicable codes and client standards (if available).
• Typical design to include general arrangement, equipment and electrical layout, elevation views, cable trench, grounding, conduit drawings, details, bills of material, and AC and DC power systems.
• Design ground grids based on applicable codes utilizing industry available software.
• Design lightning protection and grounding plans.
• Complete calculations such as AC and DC load, bus spans, and ampacity calculations.
• Create equipment and material specifications for procurement of engineered equipment as well as development of design scope and cost estimates.
• Complete conceptual designs and layouts for facility planning studies.
• Preparing additional support documentation as needed to assist procurement, construction, and operation/maintenance of systems being designed.
• Direct and/or participate in client meetings/job site visits to collect or deliver design and engineering data.
• Perform/Ensure company’s Quality Assurance/Quality Control (QA/QC) processes are being followed on all design packages.

Lead Engineer – Substation

• Coordinate with Substation Physical Engineering, Relay Settings, and other groups to ensure design concurrence
• Development of complete engineering design packages for protective relaying and communications systems, including one-line diagrams, three-line diagrams, AC schematics, DC schematics, logic and functional diagrams, panel layouts, control house layouts, wiring/connection diagrams, interconnection diagrams, relaying equipment specifications and bill of materials
• Development of SCADA packages, including input / output list (Point Data Sheet)
• Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers
• Maintaining trusted relationships with current or prospective clients
• Confidently and comfortably present technical solutions to key customers; respond in real time to technical concerns and answer questions in a knowledgeable articulate manner
• Participate in client meetings/job site visits to collect or deliver design and engineering data
• Performs assignments independently with instruction as to the general results expected and with guidance from Manager of Engineering and/or Lead Engineer on unusual or complex projects

Engineer III – Protection and Control

• Complete engineering design and documentation of distribution system projects
• Apply client, industry, and regulatory standards to project designs with guidance from Senior Engineers
• Help prepare construction plans, permit requirements, design sketches, cost estimates, material lists, and construction support using established CSA and client standards
• Participate in field reviews and travel to site to gather site information to support design decisions
• Perform simple engineering checks related to constructability, loading, and basic system impacts
• Collaborate with team members, clients, and 3rd party stakeholders to support project progress and communication
• Maintain organized project documentation and assist with estimating, scheduling, billing, invoicing, and quality reviews
• Use Microsoft Office for project organization and daily communication
• Utilize design tools and project software such as Pole Foreman, Spida-Calc, PLS-CADD, CYME, AutoCAD, Bluebeam, GIS Software (ARC, DAD, EO, DM), SAP, Passport, Maximo, DDS, or similar software
• Produce accurate design packages, meeting project timelines, budgets, and expectations

Engineer in Training – Distribution

• Assist in structural design and analysis for transmission, distribution, and substation projects from conceptual to detailed design, including equipment support structures, footings, transmission towers and poles, control rooms, and indoor GIS switchgear buildings under the guidance of senior engineers
• Prepare structural calculations and contribute to design drawing reviews from conceptual to detailed stages.
• Perform basic structural modeling using software such as SAP2000, LPILE, SAFE, and MathCAD
• Support the preparation of design documents, including design basis, reports, plans, and construction specifications.
• Review vendor drawings and documents for compliance with project specifications.
• Respond to construction-related queries and assist with project documentation, including as-built drawings and calculations, and returning data to clients
• Collaborate with other engineering disciplines to ensure integrated project delivery
• Participate in client meetings and occasional site visits to gather or deliver design data.
• Maintain accurate records and contribute to quality assurance processes.

Engineer in Training – Structural

• Design substations utilizing applicable codes and client standards.
• Typical design to include general arrangement, equipment and electrical layout, elevation views, cable trench, grounding, conduit drawings, details, bills of material, and AC and DC power systems.
• Design ground grids based on applicable codes utilizing industry available software.
• Design lightning protection and grounding plans.
• Complete calculations such as AC and DC load, bus spans, and ampacity calculations.
• Create equipment and material specifications for procurement of engineered equipment as well as development of design scope and cost estimates.
• Complete conceptual designs and layouts for facility planning studies.
• Preparing additional support documentation as needed to assist procurement, construction, and operation/maintenance of systems being designed.
• Direct and/or participate in client meetings/job site visits to collect or deliver design and engineering data.
• Perform/Ensure company’s Quality Assurance/Quality Control (QA/QC) processes are followed for all design packages.

Engineering Technician II – Distribution

Senior Engineer – Substation

Operations Driver

Associate Project Manager

Relay Field Engineer I – Relay Boot Camp

Senior NETA Field Service Technician

Senior Protection & Control Engineer

Senior Engineer – Substation

Lead Engineer – Transmission Line

Lead Engineer – Substation

Engineer III – Protection and Control

Engineer in Training – Distribution

Engineer in Training – Structural

Senior Engineer – Substation

Senior Field Service Technician