Tata Consulting Engineers

Project Manager

• Provide engineering leadership for a portfolio of small to mid-capital projects (typically under $20MM TIC each) “onsite” at a Deer Park Refinery.
• Work independently with minimal supervision.
• Collaborate with internal and external stakeholders to ensure project objectives are achieved on time and within budget.
• Coordinate with engineering disciplines, designers, and support personnel to deliver project expectations.
• Conduct occasional field visits and site walk-downs to support project development and execution.
• Ensure proper engineering, design, and project execution practices are followed throughout the project lifecycle.
• Develop project scopes, cost estimates, and support documentation.
• Use logic-based scheduling concepts to work with the dedicated Scheduler (Primavera P6 managed by others) to sequence activities, validate critical paths, and understand schedule impacts.
• Participate in project reviews and root-cause evaluations related to safety, quality, cost, or schedule issues and ensure lessons learned are incorporated into future projects.
• Promote consistent use of TCE project procedures, templates, and digital systems to improve execution efficiency and quality.
• Lead the safe execution of capital projects through all project phases, including Identification & Assessment, Select, Definition, Detailed Design, and Procurement.
• Serve as a primary point of contact with the client, lead meetings, reviews, and structured communication updates.
• Simultaneously manage multiple projects with competing priorities across a varying number of client project engineers.
• Manage projects under EPCM, Time & Materials (T&M) Provide leadership, direction, feedback, and mentoring team members and discipline leads.

Project Manager III

Technician

• Responsible for assisting in the Lab workflow as assigned.
• Responsible for preparing documents as directed which may include some level of data analysis.
• Processing samples.
• Assist scientists and engineers in R&D, quality control, and process development.
• Maintain and sterilize lab instruments and ensure a clean, safe working environment.
• Prepare and test solutions, reagents, and samples according to standardized procedures.

Lab Technician

Civil Engineer

• Perform civil/structural engineering assignments associated with designing equipment components, structures, or systems.
• Independently prepare intermediate to advanced level specifications for project assignments detailing client performance requirements, specific component needs, design requirements, applicable design codes, and vendor drawing requirements.
• Prepare engineering sketches, perform engineering calculations, and develop analysis models for complex project assignments.
• Prepare, review and/or approve vendor drawings for compliance with project specifications.
• Interact and communicate effectively with clients, subcontractors, vendors, and other consultants.
• Set realistic expectations and ensure assigned projects are completed according to schedule and within budget.
• Actively participate in company and client hazard identification and observation programs, and immediately report any unsafe acts, conditions, or incidents to your supervisor.
• Visit jobsites to evaluate site, project requirements, and conditions.
• Prepare inquiry and purchase requisitions as well as bid tabulations associated with equipment purchases.
• Perform checking of engineering drawings and mathematical calculations incorporating multi-office/global delivery elements.

Civil/Structural Engineer V

Field Engineer

• Provide technical mechanical support/input to production and operations teams.
• Support startup, shutdown, and turnaround activities.
• Support preventive, predictive, and corrective maintenance programs.
• Investigate equipment failures and perform root cause analysis.
• Monitor reliability of rotating and static equipment.
• Develop recommendations to improve equipment reliability and availability.
• Resolve equipment breakdowns and operational problems.
• Ensure compliance with OSHA, EPA, and company safety requirements.
• Assist with plant modification and capital improvement projects.
• Support commissioning new equipment and systems and verify proper installation and functionality.

Engineer

• Perform process engineering assignments associated with designing process and developing equipment requirements.
• Lead team of Process Engineers and act as a Subject Matter Expert.
• Identify process bottlenecks and devise resolutions.
• Manage and forecast man-hour requirements and schedules.

Process Engineer V

Designer

• Independently develops CADD drawings from scratch utilizing design sketches or catalog information
• Using CAD software to convert field sketched and red-lined mark-ups into final “As-Built CAD drawings” for final approvals
• Field check and verify any discrepancies identified on sketches and drawings
• Performs related fundamental engineering support tasks such as updating computer lists, filing prints, distributing drawings, making simple calculations, proofreading reports, compiling Bills of Material, etc
• Work with vendors to review the installation requirements for the different pieces of equipment
• Confer with others to resolve design issues
• Track drawing packages and provide status updates to meet requirements and deadline.

Mechanical Designer

Mechanical Engineer

• Provide project engineering for capital and expense projects including scope definition, cost estimates, design, specification and ordering of equipment, documentation, implementation, and startup.
• Design and implement projects for safety, operability, and reliability.
• Develop and submit capital and expense budgets.
• Manage capital and expense projects to meet scope, schedule and cost requirements.
• Drive improvements in maintenance work processes, procedures, performance, and cost.
• Provide mechanical engineering technical support and troubleshooting.

Project Engineer – Mechanical

Clerk

• Maintain a structured and accessible documentation system
• Reproduce and distribute engineering and technical documents
• Maintain and update equipment data files
• Ensure compliance with document control procedures and industry standards
• Manage documentation using systems such as Documentum, SharePoint, and SAP
• Maintain a comprehensive document control register
• Assist with project closeout documentation efforts
• Operate and maintain large-format plotters and printers
• Monitor and replenish office and documentation supplies
• Use Microsoft Office applications to support documentation workflows

Document Control Clerk

• Performs assignments that require application of engineering education, training or experience and special knowledge or judgment of the mathematical, physical, or engineering sciences
• Prepares basic to advanced specifications detailing performance requirements, specific components, design requirements, applicable design codes, and vendor drawing requirements
• Prepares technical specifications for review and approval
• Assists in the development of instrumentation design calculations and packages
• Visits vendor facilities to inspect equipment for compliance with requirements
• Visits jobsites to evaluate site, project requirements, and conditions
• Prepares inquiry and purchase requisitions
• Prepares bid tabulations on simple purchases
• Reviews vendor drawings
• Develops a focus on least cost, safe design
• Supervises design personnel
• Actively involved in maintaining the schedule and budget of assigned projects

Instrumentation Engineer – III

Electrical Engineer

• Lead projects from front end loading to detail design and construction
• Specify Electrical and Instrumentation Equipment
• Perform Electrical Calculations
• Review design documents, prepare estimates, and develop Bid-Ready Construction packages
• Understand and apply the National Electrical Code
• Able to work efficiently and effectively on a remote team
• Interaction from the office and on site with client representatives

Lead Electrical Engineer

• Perform controls engineering design duties under the supervision of the Director of Electrical Engineering
• Design control system architecture consisting of PLC, DCS and SCADA based systems
• Design control system communication schemes and protocols
• Specify cybersecurity requirements
• Specify control system requirements for power and utility equipment including: boilers, engine generators, pumping systems, gas compressors, water and waste water unit operations
• Develop control systems equipment, materials and installation specifications
• Develop control system loop diagrams
• Evaluate control system integration proposals and review technical submittals
• Assist in project coordination with other engineering disciplines
• Layout electrical equipment, route conduit, duct-bank and cable systems
• Support construction in the office and field by reviewing submittals, shop drawings and reports, as well as inspecting installation and oversee testing and commissioning
• Respond to customer and contractor questions
• Participate in site surveys and inspections

Engineer II

• Oversee multidisciplinary capital projects, ensuring they meet scope, budget, schedule.
• Identify and execute solutions to improve plant throughput, reliability, yield, and energy efficiency.
• Drive compliance with Process Safety Management (PSM) and Environmental, Health, & Safety (EHS) regulations.
• Coordinate between Operations, R&D, Supply Chain, and QA teams to successfully scale and transition new products from bench/pilot stages to full manufacturing.
• Maintain engineering models, generate process flow diagrams, track project KPIs, and manage budgets.

Process Engineer IV

• Execute process studies or detailed engineering analysis for projects that include capacity expansions, improvements to safety, environmental and reliability performance, product changes, process optimization, and/or other types of design changes that occur in an operating facility
• Integrate input and consultation obtained from customers/stakeholders, technical, and business organizations to ensure projects are fit-for-purpose
• Coordinate process engineering interface with third-party engineering for relevant projects/studies
• Ensure that the project scope is well defined and meets the business needs in a cost-effective manner
• Develop the project scoping of an investment opportunity through concept selection (Identify/Assess/Select Phases) or a capital project to ensure a smooth transition to Define Phase
• Provide an overview and technical assurance of contractors’ process deliverables, with guidance from the Department Manager as needed
• Support the Project Engineer in developing project scope, cost, schedule, and execution strategy (FEL3) as needed
• Participate in the Management of Change (MOC) activities for projects, providing technical assurance, and process knowledge
• Provide risk-based assurance on the quality of the safety barriers or controls, making prioritised observations and recommendations to the Project Team to act upon for further improvement
• Develop technical and scope documents to support process engineering oversight of assigned projects
• Serve as a Technical Authority (accountable to be knowledgeable of internal/external standards and best practices), reviewing and providing approval of project design from the process engineering perspective
• Provide supplemental project technical support as necessary (e.g., turnaround support for projects, high-impact operations events)

Process Engineer

• Planning and executing assigned projects, electrical engineering technical assurance activities
• Provide day-to-day electrical equipment technical support to Client Refinery Engineering Major Projects
• Identify/specify appropriate codes, standards and specifications
• Identify/specify quality control and assurance requirements
• Identify approved suppliers and/or fabricators of electrical equipment
• Review proposed suppliers and/or fabricators not currently on the approved list to determine their acceptability
• Maintain regular contact and communication with Electrical Engineering group
• Coordinate involvement of other Electrical Engineering personnel as necessary
• Communicate electrical equipment related project plans and activities to appropriate Electrical Engineering Department’s personnel
• Develop a thorough understanding of each project from an electrical engineering perspective (equipment, design, and specifications)
• Maintain awareness of non-Client Refinery Major Projects electrical equipment related project activity initiated or executed by Electrical Engineering Department’s personnel
• Participate in and comply with all Client Refinery safety programs, activities and requirements
• Accountable for providing Electrical Equipment Technical Assurance during Identify and Assess, Select, Define, and Execute project phases
• Provides Electrical Equipment Technical Assurance for the detailed engineering and procurement phase of all projects that involve electrical equipment
• Identify any project related vendor training for client Refinery Major Project’s organization or local area engineers and inspectors
• Participate (or arrange for area engineer/specialist participation) in factory performance tests of electrical equipment as required
• Participate in project MOC’s
• Attend project-related meetings as required
• Assure that associated operating procedures/orders/manuals are created or updated
• Assure that appropriate alarms and operating limits are communicated to Area teams and operating units
• Provide Project Staffing estimates to Project Engineers for project estimating
• Assure that spare parts strategies are appropriate based on the agreed upon criticality of the equipment
• Accountable for quality assurance requirements being met for electrical equipment installed during Client Refinery major projects
• Provide engineering support when needed for resolution of construction related technical issues surfaced in the field during the construction phase of projects
• Review and approve engineering packages
• Provide technical support and troubleshooting of project electrical equipment issues
• Provide input to staffing plans for the commissioning/start up phases of Client Refinery Major Projects
• Where possible or appropriate, provide professional development opportunities for Electrical Engineering personnel
• Participate in the MOC (Management of Change) process, where applicable
• Participate in equipment turnovers as needed
• Oversee equipment commissioning activities, as required
• As needed, work directly with the field constructor during system punch out and acceptance of systems
• Oversee equipment testing, monitoring, repairs and adjustments during the commissioning and start up periods
• Participate in preparing equipment start up, operating, shutdown and emergency guidelines and procedures, as required
• Assure that all electrical equipment and related facilities meet the requirements for document control to Client Document Control
• Audit equipment files supplied by engineering contractors to assure complete and accurate information submittal
• Assure that spare parts and spare parts information; equipment baseline data and equipment receiving and preservation data have been properly managed

Electrical Engineer II

Business Development Rep

• Proactively develops and maintains sustaining client relationships that foster continued business opportunities
• Develops sales and execution plans in line with the needs of the clients and industry.
• Creates persuasive presentations to secure new business.
• Delivers results that are at or above the sales forecast, including a focus on profitability.
• Works with other Business Development Executives to cross-sell, ensuring TCE is well positioned with the client base.
• Acts as the primary contact and is responsible for responding to requests for proposal, requests for information, and other project-related documentation.
• Coordinates sales effort with marketing, sales management, accounting, logistics and technical service groups.
• Actively participates in the risk assessments for larger and/or lump sum projects.
• Maintains the sales forecast and opportunity tracking system on a timely basis.
• Actively researches for potential new clients and business opportunities.
• Identifies and recommends additional growth areas for the industry line.
• Keeps abreast of technical services, market conditions, competitive activities, and promotional trends.