Technician

• Learn to perform diagnostic and mechanical repairs under the supervision of an experienced technician
• Gain hands-on experience as an automotive mobile technician across a wide range of manufacturers
• Perform vehicle repairs according to OE specifications and repair standards
• Participate in mentorship, skilled training, and certification programs
• Work within a production shop using computerized diagnostic equipment, factory diagnostic and programming software, and tools

Automotive diagnostic apprentice performing mobile repairs for Protech Automotive Solutions

Automotive Mobile Diagnostic Technician Apprentice

Automotive Diagnostic Technician Apprentice learning mobile mechanical and computerized vehicle repairs at Protech Automotive Solutions.
Gaining hands-on training, mentorship, and certifications across multiple vehicle manufacturers.

• Maintain, calibrate, and troubleshoot power plant emission monitoring systems
• Support efficient power generation and regulatory compliance
• Assist entry-level technicians
• Complete vendor training as required in the Quality Assurance Plan
• Perform general maintenance, configuration, and calibration of CEMS, COMS, PM, and CMMS systems
• Schedule and coordinate daily activities with the supervisor
• Perform daily, monthly, quarterly, and annual preventative maintenance
• Troubleshoot and maintain AC/DC control circuits and components
• Communicate with plant operations about the impact of process changes on emission levels
• Travel frequently to OG&E generation facilities and spend most working time at power plants
• Work independently and with teams under general supervision
• Perform other assigned duties

CEMS Technician maintaining OG&E power plant emission monitoring systems in Panama, Oklahoma

CEMS Technician

CEMS Technician maintaining and calibrating OG&E power plant emission monitoring systems in Panama, Oklahoma. Troubleshooting controls and supporting emissions compliance across generation facilities.

• Install, configure, and calibrate HVAC systems, building equipment, ductwork, and control components
• Diagnose and resolve mechanical, electrical, and control issues affecting HVAC and facility systems
• Perform preventive maintenance, inspections, and repairs
• Operate tools, equipment, and vehicles safely while following OSHA and company protocols
• Document maintenance activities, parts usage, and work orders using digital tools
• Communicate service needs and status updates to facility operators and management
• Participate in on-call rotations and support multiple facility locations
• Contribute to facility operational efficiency and continuous improvement

HVAC technician maintaining Walmart retail facilities and building controls

Technician, Facility Services, HVAC

HVAC Technician installing, repairing, and maintaining systems across Walmart retail facilities. Diagnosing controls and equipment issues while supporting safe, efficient store operations.

• Install, test, calibrate, repair, and maintain flow meters, regulators, telemetering systems, electronic flow computers, odorant systems, relief valves, and related measurement equipment
• Perform measurement, sampling, regulation, troubleshooting, and maintenance activities at facilities
• Calibrate and maintain test instrumentation and auxiliary equipment
• Drive and maintain a company vehicle as assigned
• Interact with corporate measurement personnel and follow corporate measurement procedures
• Prepare job orders, completion reports, installation/removal documentation, equipment and operational test reports, DOT compliance reports, and sample reports
• Generate batch tickets
• Witness meter calibrations according to contractual obligations
• Support DOT-covered pipeline operations, maintenance, or emergency response functions
• Respond immediately to dangerous or hazardous conditions
• Travel to other locations and perform work across ONEOK’s Oklahoma assets

Measurement Technician maintaining natural gas liquids infrastructure for ONEOK

Measurement Technician

Measurement Technician maintaining meters, regulators, and instrumentation for ONEOK’s natural gas liquids infrastructure. Supporting safe, accurate field operations across Oklahoma facilities.

• Perform all preventive maintenance services, tire services, and emergency road service calls
• Conduct DOT inspections and ensure compliance with applicable regulations
• Perform service calls, including night and on-call assignments
• Use J-Pro, FleetCross, and OE software to diagnose and repair vehicle systems
• Complete work orders accurately, documenting labor, parts, and warranty information
• Perform intermediate to advanced engine, emissions, drivetrain, wheel-end, air system, steering, suspension, electrical, and HVAC repairs
• Maintain cleanliness and organization of the shop, tools, and equipment
• Ensure tools, jacks, and service vehicles remain in safe working condition
• Complete LMS training and OSHA Skills Demonstrations as required
• Provide friendly, professional, and competent customer service
• Follow company safety policies, procedures, and OSHA requirements
• Assist with other assigned duties
• Advanced-level technicians may mentor shop personnel and serve as technical subject matter experts

Experienced diesel technician repairing commercial trucks for Boss Truck Shop

Shop Technician

Experienced diesel technician repairing commercial trucks for Boss Truck Shop in Ardmore, Oklahoma.
Diagnosing and servicing engines, brakes, drivetrains, electrical systems, HVAC, and related vehicle systems.

• Install, configure, and calibrate HVAC and refrigeration systems, including ductwork and control panels, ensuring compliance with building codes.
• Diagnose and resolve mechanical, electrical, and refrigerant-related issues in commercial and industrial equipment.
• Perform preventive maintenance and routine inspections to optimize system performance and extend equipment life.
• Maintain refrigeration units such as racks, walk-ins, and reach-ins, adhering to EPA 608 refrigerant handling protocols.
• Lead and mentor field teams on technical procedures and safety standards.
• Manage service calls, documentation, and coordinate with external providers as needed.
• Operate company vehicles safely to complete service assignments within assigned regions.

Technician responsible for HVAC and refrigeration systems maintenance and repair at Walmart.

Technician, Facility Services, HVAC-Refrigeration – Journeyman Required

Technician responsible for installing, maintaining, and repairing HVAC and refrigeration systems at Walmart locations. The role involves ensuring compliance with safety and environmental regulations alongside technical schematics interpretation.

• Conduct field surveys using various surveying equipment, including total stations, levels, and GPS
• Assist with drafting and data management using CAD software
• Maintain and calibrate surveying equipment
• Assist with recordkeeping and documentation
• Work collaboratively with surveying staff and project managers
• Other duties as assigned

Survey Technician conducting field surveys and assisting with drafting

Survey Technician

Survey Technician conducting field surveys and assisting with drafting and data management using CAD software. Requires collaboration with survey team and managers in Northwest Arkansas.

• Assist lead body tech with 100% tear down
• Remove damaged components and assist in evaluation of damages
• Assist with installation of new parts
• Organize parts for repair orders
• Assist with light body work

Auto Body Technician Helper assisting lead body tech in a collision repair company

Auto Body Technician

Auto Body Technician Helper assisting lead body tech with repairs at Crash Champions, the largest collision repair operator in the U.S. Responsible for component teardown, installation, and organization of repair orders.

• Ensure safety for everyone involved, including Risk Assessment and identifying potential hazards.
• Perform major component exchanges including gearboxes, generators, and other critical systems.
• Execute maintenance, minor to medium repairs, design modifications, retrofits, and special projects.
• Travel extensively to support turbine operations across multiple platforms and site conditions.
• Collaborate with teams to ensure safe, efficient, and high-quality work.
• Conduct safety inspections and ensure a secure working environment.

Repair Technician for wind turbines traveling extensively across the Northwest region.

Wind Technician II – 100% Travel

Repair Technician for wind turbines specializing in major component exchanges and optimizations, requiring 100% travel across the Northwest US.

• Assists with patient treatments as directed.
• Conducts passive range of motion and monitor active range of motion on assigned patients.
• Set up patients for hot pack and cold pack treatments in accordance with specific instructions from PT or PTA.
• Monitors patients performing basic exercise in accordance with specific instructions from therapist or assistance.
• Performs charge audits and charge reconciliation, and communicate needed corrections to appropriate personnel.
• Identifies new therapy orders and patient discharges. Assigns new patients to therapists.
• Maintains adequate inventory of supplies and equipment.
• Completes non-clinical and clerical tasks as assigned.
• Works in a constant state of alertness and safe manner.
• Performs other duties as assigned.

Technician performing patient care and department support duties in rehabilitation services.

Rehabilitation Services Technician

Rehabilitation Services Technician assisting with patient care and clerical tasks in a medical setting. Requires patient monitoring, treatment setups, and inventory management.

• Provide mentorship and training to learn how to perform a wide range of Advanced Driver Assistance System Calibrations by following OE specifications and repair standards.
• Gain confidence as a calibration technician across a wide range of manufacturers.
• Graduate from a Calibration Technician Apprentice to either a Protech Calibration Technician or On-Site Calibration by the end of the 7th month in this role.

Calibration Technician Apprentice learning advanced driver assistance system calibrations

Automotive ADAS Calibration Technician

Calibration Technician Apprentice working with Advanced Driver Assistance Systems. Providing mentorship and training for a variety of vehicle calibration tasks.

• Conducts pre-donation medical screening in accordance with established guidelines
• Promotes customer satisfaction through appropriate interaction and responsiveness to customer needs
• Assesses donor suitability and engages in set-up, monitor, and disconnect procedures of the plasmapheresis machine and donors
• Ensures all donor screening information is complete and accurate prior to donation

Lead Donor Center Technician responsible for pre-donation screening and donor engagement

Lead Donor Center Technician

Lead Donor Center Technician performing medical screenings and engaging with donors at plasma center in Oklahoma. Ensuring donor information accuracy and customer satisfaction for enhanced donation experience.

• Conducts pre-donation medical screening.
• Interaction and responsiveness to customer needs.
• Assesses donor suitability and engages in set-up.

Donor Center Technician conducting medical screenings in plasma center

Donor Center Technician

Donor Center Technician conducting medical screenings and assessing donor suitability in plasma center. Ensuring donor confidentiality and completing necessary screening information.

• Travel 100% on a rotational basis to wind farms throughout the U.S. - cross country travel by air or truck
• Perform composite blade repair uptower via platforms, rope access and/or occasionally on the ground
• Epoxy and Polyester resin wet layup
• Vacuum infusion
• Balsa and foam sandwich materials
• Structural repair
• Completing detailed Daily Progress Reporting Documents and QAQC reports
• Completing onsite stock checks
• Assisting site lead and project coordinator as applicable

Traveling Wind Turbine Blade Technician performing composite repairs across the USA

Traveling Wind Turbine Blade Technician, Rope Access Level 2/3

Traveling Wind Turbine Blade Technician repairing composite blades across the USA. Ensuring structural integrity and efficiency of wind turbine blades at various locations.

• Mosquito Hunters Technicians apply mosquito control products to clients' landscaping
• Participate in marketing initiatives
• Provide a remarkable client experience
• Travel to client's home or business
• Survey each property
• Treat standing water with larvicide
• Perform barrier treatment to surrounding landscaping using a backpack sprayer

Mosquito Hunters Technician applying mosquito control in client's landscaping

Mosquito Control Technician

Mosquito Hunters Technician applying mosquito control products while providing exceptional client experiences. Responsibilities include traveling, surveying properties, and conducting treatments outdoors.

• Maintain and repair wind turbines with your team to keep communities powered.
• Adhere to safety protocols and perform safety inspections.
• Collaborate with your team to improve turbine performance and share best practices.
• Document your work and continuously improve operational processes.
• Accurately time code all work activities to support clear tracking of task duration, progress, and operational efficiency.

Wind Site Technician ensuring smooth operation of wind turbines at Vestas

Technician II

Wind Site Technician ensuring smooth operation of wind turbines at Vestas. Collaborating on maintenance and troubleshooting to provide clean energy solutions for communities.

• Repair and maintain wind turbine generators and related equipment at the wind farm.
• Support 24/7/365 wind farm operations, including rotating shifts, overtime, and on-call duties.
• Conduct, support and review safety analyses of energy sources, electrical and mechanical hazards before and while performing any work assignment on the wind farm, wind turbines, switch room, and O&M Building.
• Assist in Root Cause Analyses to determine equipment failures.
• Complete and maintain accurate documentation for corrective and preventive maintenance.
• Utilize appropriate safety gear, protective equipment, and control or dissipation of energy sources to ensure work is performed in a safe manner.
• Maintain tools and equipment properly.
• Complete Lock-Out-Tag-Out (LOTO), JSEA’s, and job-specific documentation that is required to conduct safe maintenance and repairs.
• Read and interpret electrical and hydraulic schematics.
• Use computer skills, including MS Office.
• Organize and prioritize work, meet deadlines, and prepare plans and reports.

Service Technician responsible for maintaining wind turbine generators in renewable energy sector

Service Technician

Service Technician ensuring safe operation of wind turbine generators for renewable energy. Responsibilities include maintenance, documentation, and compliance with safety standards.

• Ability to travel 100% of the time and also requires working overtime, including working a variable work schedule as needed to meet business goals
• Acts as a safety role model, encourages and recognizes others completing safe acts and intervenes when unsafe acts are being practiced. Adheres to all safety standards and procedures.
• Identifies gaps in safety standards as well as safety risks in the environment, implements effective risk mitigation and provides recommendations to higher level technical staff and management
• Demonstrates and promotes integrity, professional initiative, as well as a no-compromise focus on safety and quality of work on a continuous basis. Also may assist with or perform basic quality audits
• Performs intermediate level wind turbine maintenance and installation tasks as assigned. This includes proficient operation and use of tools (including but not limited to specialized calibration, hydraulic, power tools) and basic turbine equipment.
• Documents tasks where required and enters data into company system, such as SAP
• Effectively gathers information regarding turbine performance / issues. May diagnose, recommend, and implement solutions up to intermediate routine issues. Seeks assistance when encountering turbine issues outside trained skill level to ensure a suitable resolution
• Follows basic structured problem-solving process to complete troubleshooting and diagnostic tasks to include the use of diagnostic tools (e.g. basic fluke meter functions, hydraulic pressure gauge).
• Initiates and performs most work tasks with limited supervision and follows defined instructions and maintenance schedules, completing plans as directed and performs according to written and verbal instruction from higher level technical staff
• Effectively promotes a healthy team environment through assisting teammates in accomplishing goals as well as mentoring lower level technical staff. Visibly supports and promotes team spirit and collaboration, supports change initiatives and looks for improvement opportunities to job-appropriate processes and procedures while communicating through appropriate channels to implements improvements using the appropriate control management protocol
• Interfaces with customer and may respond to customer inquiries. Will refer complex customer inquiries to higher level technical staff or manager. Demonstrates professional customer focus at all times.

Traveling Wind Turbine Technician II role requiring 100% travel

Traveling Wind Turbine Technician II

Traveling Wind Turbine Technician II role performing maintenance and installation tasks with 100% travel across North America. Engaging in safety, teamwork, and customer relations while working on wind turbines.

• Conducts pre-donation medical screening.
• Interaction and responsiveness to customer needs.
• Assesses donor suitability and engages in set-up.
• Provides appropriate feedback to ineligible donor candidates.
• Ensures all donor screening information is complete.
• Ensures donor confidentiality.

Donor Center Technician conducting pre-donation medical screenings for Grifols

Donor Center Technician conducting pre-donation medical screenings for Grifols. Engaging with donors and ensuring proper screening and confidentiality protocols are met.

• Develops, trains and supports our customers to meet the needs of our collision shop customers, with primary focus on the Economy Segment in the areas of new products, technical support, training availability
• Maintains expert level of knowledge and competency in all Axalta brands focusing on the Economy Segment products to support new customer installations, training and certification of painters, and troubleshoot technical issues
• Conduct product training sessions and demonstrations for customers and automotive professionals to showcase best practices, application techniques and provide guidance in optimizing paint and material system performance and profitability
• Cultivate and maintain strong relationships with customers and industry partners

Product Specialist supporting Axalta products in the Economy segment

Paint Technician, Auto Body

Product Specialist supporting Axalta products in the Economy segment. Focus on customer training and product support within the automotive aftermarket sector.

Technician jobs in Oklahoma

See all jobs on JobTailor

Automotive Mobile Diagnostic Technician Apprentice

CEMS Technician

Technician, Facility Services, HVAC

Measurement Technician

Shop Technician

Technician, Facility Services, HVAC-Refrigeration – Journeyman Required

Survey Technician

Auto Body Technician

Wind Technician II – 100% Travel

Rehabilitation Services Technician

Automotive ADAS Calibration Technician

Lead Donor Center Technician

Donor Center Technician

Traveling Wind Turbine Blade Technician, Rope Access Level 2/3

Mosquito Control Technician

Technician II

Service Technician

Traveling Wind Turbine Technician II

Donor Center Technician

Paint Technician, Auto Body