Mechanical Engineer

• Lead the design, development, deployment and rollout of enhancements on the API Platform
• Consult with business delivery teams
• Mentor and coach team members
• Create and maintain technical documentation for the CDC solution

Senior API Platform Solutions Design Engineer

• Maintain and add new functionality to our FPGA code base, including code to control and test our SDR (software-defined radio) and SDN (software-defined network);
• Design custom IP for new features of both Kepler's satellites and ground stations;
• Add support for new sensors/communication interfaces (such as SPI, I2C, UART);
• Work with high-speed FPGA interfaces (e.g. JESD204b, 10G Ethernet, Aurora).

FPGA Digital Design Engineering Intern, 4-16 months

• Supporting the design of HVAC, plumbing, drainage, fire-protection, and other mechanical building systems
• Performing engineering calculations, equipment selections, and technical evaluations
• Preparing and reviewing drawings, specifications, schedules, reports, and other project documentation
• Using AutoCAD and Revit to support mechanical design and interdisciplinary coordination
• Assisting with energy-efficient and sustainable building-system solutions
• Coordinating with architects, electrical engineers, contractors, suppliers, and other project stakeholders
• Reviewing shop drawings and responding to requests for information during construction
• Participating in site visits, field reviews, deficiency inspections, and construction meetings
• Assisting with feasibility studies, building-condition assessments, and renovation projects
• Helping ensure designs meet applicable codes, standards, client requirements, budgets, and project schedules
• Managing assigned tasks and smaller project components with increasing independence
• Developing stronger client-facing, technical, and project-management capabilities over time

• Execute mechanical engineering deliverables
• Complete calculations to support project deliverables
• Select and size mechanical equipment
• Prepare or check equipment data sheets, MEL, valve lists, and line lists
• Check and seal drawing packages
• Write or review technical reports, engineering specifications, and construction specifications
• Provide project deliverables as per project schedule
• Coordinate across disciplines and departments for project implementation, design, and inspection
• Troubleshoot mechanical systems for operating mine sites and heavy industrial facilities
• Support cost estimating with reviews of project deliverable based on proposal scope
• Present project designs, concepts, and progress updates to clients and stakeholders
• Ability and willingness to travel for site visits as required

Mechanical Engineer – Contractor

• Contribution during firmware architecture development and implementation of the defined firmware features.
• Working closely with verification team to debug and fix the FW issues found with verification simulations.
• Involvement during post-silicon testing and validation to identify any FW and HW related functionality and performance issues and implement any necessary FW improvements to address these issues.
• Interaction with Product Engineering, System Validation and Design team to debug IP issues in the field and provide hot fixes.
• Help to build system level prototype control software to develop/validate adaptation, equalization, and control algorithms for high speed SERDES.
• Implement assigned FW features and work closely with verification and validation team to ensure the functionality and robustness of the implemented features.
• Support of Validation team during electrical and system characterization.
• Support of Product Engineering team during customer deployment of the IP.

Firmware Design Engineer

• Manage project stakeholders and ensure clear, proactive communication throughout the lifecycle of ongoing projects.
• Define key milestones and produce structured reports at each stage of the project life cycle.
• Work with data center managers across regions to ensure consistency and technical quality of design and delivery practices.
• Contribute to the overall design and budgeting strategy for all projects: new builds, expansions, renovations, conversions, selection of mechanical/electrical equipment, etc.
• Identify site-specific constraints, design gaps, and infrastructure routing issues with local teams, and propose optimizations.
• Monitor and escalate risks, single points of failure, and other critical infrastructure issues.
• Manage the capacity of our national data center fleet, in line with key performance indicators (KPIs).

Data Center Infrastructure Design Engineer

• Lead and contribute to the civil design of rail and transit infrastructure projects across Canada.
• Prepare and review design drawings, specifications, technical reports, and construction documentation.
• Develop solutions related to grading, drainage, corridors, roadworks, site development, utilities, and transportation infrastructure.
• Coordinate with multidisciplinary project teams including track, structures, architecture, systems, utilities, and environmental specialists.
• Support project planning, design development, and engineering delivery for major transit programs.
• Interface directly with clients, transit authorities, contractors, and key project stakeholders.
• Perform quality reviews and ensure compliance with applicable codes, standards, and client requirements.
• Provide mentorship and technical guidance to junior engineers and designers.
• Support proposal development, business development activities, and client relationship management efforts.

Civil Design Engineer, Rail – Transit

• Lead and support structural engineering design for rail and transit infrastructure projects throughout Canada.
• Perform structural analysis, design calculations, and engineering assessments for a variety of transportation structures.
• Develop design drawings, technical specifications, engineering reports, and construction documentation.
• Design and review structural systems utilizing steel, reinforced concrete, masonry, timber, and other construction materials.
• Coordinate closely with civil, track, systems, architecture, geotechnical, and construction teams.
• Participate in all project phases, from planning and preliminary engineering through detailed design and construction support.
• Conduct structural inspections, condition assessments, and rehabilitation studies as required.
• Ensure designs meet applicable Canadian codes, standards, client requirements, and industry best practices.
• Provide technical leadership and mentorship to junior engineers and designers.
• Support client engagement, proposal development, and business growth initiatives within the Rail + Transit practice.

Structural Design Engineer – Rail, Transit

• Develop HVAC, plumbing, and fire sprinkler calculations that support building design and ensure compliance with industry standards and regulations
• Interpret mechanical, plumbing, building, and fire codes to provide guidance in design implementation and ensure alignment with code requirements
• Interpret fire protection and life-safety standards, including hazardous area classification and ventilation, for design and compliance with standards the CSA, NFPA (e.g., NFPA 820 for wastewater facilities) and relevant environmental or industrial regulations within a wastewater context
• Develop and implement solutions for hazardous area ventilation, odor control, and explosion prevention in highly corrosive or combustible environments typical of wastewater treatment
• Use software to draft and model HVAC, plumbing, and fire sprinkler systems, and develop specifications for HVAC, plumbing, and fire sprinkler equipment
• Interpret relevant codes and standards for fire sprinkler system design and compliance
• Review HVAC, plumbing, and fire sprinkler drawings/specifications, coordinating with other engineering disciplines to ensure integration and compliance
• Size ductwork, plumbing, and fire sprinkler distribution systems using industry-standard techniques and models
• Lead large projects with limited oversight and contribute to projects of strategic importance

Senior Building Mechanical Engineer – Water/Wastewater

• Own hardware schematic design for multi-phase buck regulators, point-of-load converters, and power sequencing circuitry.
• Select critical power components, including passives, inductors, power stages, controllers, and supporting circuitry.
• Define placement and routing constraints for board-level power delivery networks, including decoupling capacitor strategy and high-current power paths.
• Work closely with package engineering to ensure clean power delivery handoff at the socket or package interface.
• Lead lab validation of power subsystems, including VRM efficiency, loop stability, DC IR drop, thermal behavior, and transient response.
• Use oscilloscopes, electronic loads, network analyzers, thermal cameras, and related lab equipment to characterize power rails under maximum dynamic load conditions.
• Partner with SI/PI engineers to measure and mitigate power supply noise and Power Supply Induced Jitter on sensitive high-speed lanes.
• Debug power integrity issues across board, package, silicon, firmware, workload, and system-level interactions.
• Contribute to design guidelines, validation plans, and best practices for power delivery across the company’s hardware platforms.

Principal Power Design Engineer

• Develop and own hardware solutions to support Kepler’s space technology that requires the utilization of leading technology and practices.
• Heavily support design reviews for all active designs to minimize design gaps and drive learnings for younger engineers.
• Supporting pathfinding development for future satellite generations that will utilize new technology and interfaces including UFS, 10G+ Ethernet, PCIe 5.0, various other high-speed interfaces, new memory technology, and processors.
• Conduct and document engineering analysis including derating, reliability, radiation, EMI/EMC, FMECA, and power budgets.
• Contribute to best practices and development of internal standards.
• Maintain thorough technical documentation that captures design decisions, design specifications, block diagrams, interface requirements, and system architecture reports.
• Work closely with other cross-functional engineering teams including RF, mechanical, software, and FPGA to develop full product solutions.
• Driving knowledge-sharing activities to build up the technical knowledge of more junior engineers.

Senior Electrical Design Engineer – Contingent

• Develop hardware solutions to support Kepler’s space technology that requires the utilization of leading technology and practices
• Support design reviews for active designs to minimize design gaps
• Conduct and document engineering analysis including derating, reliability, radiation, EMI/EMC, FMECA, and power budgets
• Support pathfinding development for future satellite generations that will utilize new technology and interfaces including UFS, 10G+ Ethernet, PCIE5, various other high-speed interfaces, new memory technology, and processors
• Maintain technical documentation that captures design decisions, design specifications, block diagrams, interface requirements, and system architecture reports
• Develop full product solutions by working closely with other cross-functional engineering teams including RF, mechanical, software, and FPGA

Electrical Design Engineer, Contingent

• Design mechanical lifting systems, including rails, structural supports, interfaces, and components intended for installation within buildings.
• Develop and review technical drawings and installation documentation.
• Perform structural analyses to assess loads, load paths, and the mechanical behavior of systems and their building anchoring methods.
• Apply Design for Installation (DFI) and Design for Manufacturing (DFM) principles to optimize product manufacturability, installation efficiency, and overall performance.
• Collaborate closely with manufacturing, quality, project management teams, and suppliers to ensure project success.
• Lead technical assignments and support product transfer activities into production.
• Participate in the technical coordination of projects and support alignment among various stakeholders.

Senior Mechanical Engineer – Rail Systems, Building Integration

• Design and simulation of high-speed analog mixed-signal IC products from concept to manufacturing
• Work proactively with the extended team to implement new designs to specification and support existing products
• Capture and share simulation results, measurements and methodologies
• Preparation of technical reviews and product documentation
• Involvement in the lab evaluation of high-speed analog circuits
• Plan and report progress of work

Associate Analog Design Engineer

• Own problems end-to-end: Take full ownership of product features from understanding the problem, to designing the experience, to writing the front-end code and shipping it to users.
• Prototype in code: Replace static mockups with functional prototypes to validate ideas quickly and de-risk decisions with real customer feedback.
• Drive design-led development: Work in a fixed-time, variable-scope environment. Focus on outcomes over outputs, partnering closely with backend and core engineering to deliver meaningful impact.
• Ship fast without sacrificing quality: Balance speed and craft. Deliver polished, production-ready experiences on tight timelines, with strong attention to detail in both design and code.
• Elevate the UI architecture: Evolve our design system and component libraries so design and code stay perfectly in sync across mobile and web platforms.
• Act as a force multiplier: Raise the bar for the entire design team by helping designers ship in code and integrate AI tools into their workflows—improving speed, autonomy, and technical depth across the organization.

Staff Design Engineer

• Prepare drawings, specifications, cost estimates and reports for mechanical design projects
• Design HVAC systems, plumbing, fire protection, controls systems, and specialized piping systems (natural gas, fuel oil)
• Perform mechanical calculations for ductwork, piping, and equipment sizing
• Develop equipment schedules and coordinate with project teams to ensure accurate design
• Conduct energy modeling for LEED, Green Globes, and Green Buildings Initiatives
• Complete facility condition assessments, feasibility studies, and design briefs
• Collaborate with multidisciplinary teams and respond to internal/external project inquiries

Intermediate Mechanical Design Engineer – Mechanical Building Systems

• Execute mechanical engineering deliverables
• Complete calculations to support project deliverables
• Select and size mechanical equipment
• Prepare or check equipment data sheets, MEL, valve lists, and line lists
• Check and seal drawing packages
• Write or review technical reports, engineering specifications, and construction specifications
• Provide project deliverables as per project schedule
• Coordinate across disciplines and departments for project implementation, design, and inspection
• Troubleshoot mechanical systems for operating mine sites and heavy industrial facilities
• Support cost estimating with reviews of project deliverable based on proposal scope
• Present project designs, concepts, and progress updates to clients and stakeholders
• Ability and willingness to travel for site visits as required.

Mechanical Engineer – Intermediate/Senior

• Participating in or leading next-generation physical design, methodology, and flow development in advanced technology nodes.
• Perform physical design implementation, including floor planning, power grid design, place and route, clock tree synthesis, timing closure, power/signal integrity signoff, physical verification (DRC/LVS/Antenna), EM/IR signoff, DFM Closure.

Physical Design Engineer II – PNR, Physical Verification, STA, EMIR

• Develop and manage mechanical engineering design deliverables for projects
• Support business development activities for the mechanical engineering group
• Ensure quality and consistency of engineering deliverables
• Perform site investigations and abide by safety regulations
• Use software tools like AutoCAD, Revit, and Carrier HAP for deliverables

Mechanical Engineer jobs in Canada

See all jobs on JobTailor

Senior API Platform Solutions Design Engineer

FPGA Digital Design Engineering Intern, 4-16 months

Mechanical Engineer

Mechanical Engineer – Contractor

Firmware Design Engineer

Data Center Infrastructure Design Engineer

Civil Design Engineer, Rail – Transit

Structural Design Engineer – Rail, Transit

Senior Building Mechanical Engineer – Water/Wastewater

Principal Power Design Engineer

Senior Electrical Design Engineer – Contingent

Electrical Design Engineer, Contingent

Senior Mechanical Engineer – Rail Systems, Building Integration

Associate Analog Design Engineer

Associate Analog Design Engineer

Staff Design Engineer

Intermediate Mechanical Design Engineer – Mechanical Building Systems

Mechanical Engineer – Intermediate/Senior

Physical Design Engineer II – PNR, Physical Verification, STA, EMIR

Mechanical Engineer