Leonardo

Full-stack Engineer

• Project Engineering Leads manage multi-disciplined engineering team across multiple projects.
• They are responsible for delivery of the overall engineering output against time, cost and performance budgets.
• They drive design maturity and lead engineering design reviews.
• Project Engineering Leads prepare and communicate monthly engineering status reports for each of their assigned projects into their line manager.
• They are responsible for the coordination of engineering input into bids as part of the business winning process.
• They line manage a multi-disciplinary team of engineers, playing an active role in their career development.

Project Engineering Lead

Project Manager

• Maintain project plans, schedules, milestones and deliverables.
• Collate and prepare project status reports for internal reviews.
• Support the Leonardo UK Lead Project Manager as the point of contact for Leonardo UK Domain performance.
• Plan and manage project phase transitions; update documentation and address challenges.
• Engage stakeholders for approvals and evaluate transition effectiveness.
• Define KPIs for projects and operations.
• Assess RFQ achievability; provide timelines and resources.
• Consolidate technical/non-technical material for RFQ responses.
• Coordinate programmatic review and support non-technical negotiations.
• Identify stakeholders and gather requirements.
• Define lesson-learned process and develop domain-specific plans.
• Oversee operating model setup and monitor effectiveness; mitigate risks.
• Support the generation of SOR, SoW, cost estimates, and coordinate joint reviews.

Solutions Engineer

• Act as the technical authority for solution design across large-scale or multi-project programmes.
• Define and evolve architectures that balance customer needs, enterprise principles, and secure-by-design standards.
• Contribute to divisional and line-of-business roadmaps, identifying opportunities for technology insertion and innovation.
• Lead technical reviews, trade-off studies, and risk assessments for major design decisions.
• Mentor and coach Solutions Architects and Engineers, raising capability across the community.
• Represent Leonardo at senior customer forums, technical boards, and industry events.
• Support business winning, including solution strategy, bids, and proposal development.
• Champion best practice, reuse, and model-based design approaches across the architecture community.

Solution Architect

Risk

• Own and facilitate the annual and 5‑year Capital Planning cycle for the Electronics Division, ensuring alignment to strategic objectives and operational priorities.
• Coordinate and support the capital data capture process by engaging with stakeholders across UK sites to ensure high‑quality submissions aligned to capital system requirements.
• Maintain oversight of the UK budget, including in‑year forecasting, actuals tracking, and variance reporting.
• Coordinate engagement with external funding opportunities for manufacturing technology development, supporting applications with partners such as universities, Catapult centres, and industry bodies.
• Act as the central coordination point for CapEx performance reporting, supporting regular reviews with the VP Operations, VP Finance, and Business Unit Leadership Team.
• Drive effective engagement with Sector VPs, IPT Leads, Project Managers, and other stakeholders to ensure capital plans are realistic, deliverable, and appropriately resourced.
• Champion process improvement and standardisation across the CapEx lifecycle.
• Prepare and deliver senior‑level presentations and decision‑making packs to support capital prioritisation and strategic planning.
• Ensure the capital system remains accurate and up to date, including capturing, triaging, and supporting the rollout of system enhancements.
• Coach and mentor capital system users on data collection, system navigation, and interpretation of capital reports.
• Act as the prime tester for capital system enhancements prior to production release, ensuring changes are validated, documented, and fit for purpose.

Capital Governance Lead

Business Analyst

• Analisi e formalizzazione dei requisiti di business per lo sviluppo e l’uso del PLM (Product Lifecycle Management) nell’ambito dell’ingegneria industriale/digital manufacturing per la definizione di MBOM, Cicli, Work Instruction, change, ecc…
• Conoscenza dei flussi progettuali e produttivi in ambito aeronautico
• Coordinamento delle attività, a livello nazionale ed internazionale per perseguire i requisiti sopra definiti, seguendo le diverse fasi del programma
• Capacità interpretativa e di astrazione rispetto ai diversi approcci tecnici occorrenti presso i team che partecipano al programma
• Capacità e conoscenze tecniche per seguire e valutare le modifiche al PLM di programma per quanto in ambito Pianificazione e redazione di business case
• Problem solving (se possibile anche in ambito internazionale)

Business Analyst – IDG

• Analisi dei processi E2E per quanto concerne i programmi internazionali
• Coordinamento delle attività a livello nazionale e internazionale per i programmi di riferimento, che includono Raccolta dei requisiti funzionali e non funzionali
• Definizione dell’architettura applicativa target sulla base dei requisiti
• Selezione delle tecnologie software in collaborazione con gli enti di business di Leonardo
• Pianificazione e redazione di business case
• Problem solving (se possibile anche in ambito internazionale)

Software Architect

Operations

• Study of Project-specific Characteristics and Ground Segment Documentation
• Participation in the Analysis and Design of Satellite Operations
• Generation and validation of Flight Control Procedures
• Mission Management and Mission Planning Support
• Service Support for Ground Segment Systems development, evolution and testing (e.g. MCS, SIM and MPS)
• Participation in the team Training Program
• Routine Payload & Platform Operations
• Participation in all Mission Critical Operations
• General Flight Control Support Service
• Spacecraft Performance Analysis
• Participation in the on-call service

Sentinel 5P Spacecraft Operations Engineer

• Gestire l’analisi di alto livello e la comprensione dei requisiti tecnici e digitali
• Supportare i team di progetto nell’individuazione delle soluzioni architetturali digitali e di cybersecurity
• Valutare tecnologie ed impatti e guidare la scelta di prodotti e soluzioni
• Elaborare proposte, progetti ed offerte di soluzioni digitali e di cybersecurity scalabili, sicure e integrate
• Guidare le attività progettuali necessarie per accompagnare i clienti nella trasformazione digitale
• Supervisionare la delivery e supportare i team di sviluppo/operations

SDET

• Analisi dei requisiti dei sistemi velivolo Flight Control System, Avionic system ed Hydraulic system per la definizione di procedure di test;
• Redazione di procedure di integrazione dei suddetti sistemi velivolo e loro esecuzione;
• Redazione ed esecuzione di test funzionali su Flight Control System M345/M346;
• Esecuzione di test di Endurance e Fatigue su Flight Control System M345/M346;
• Redazione dei relativi test report con analisi dei risultati;
• Esecuzione di test con Pilot in the Loop;
• Contribuire all’analisi dei problemi in-service;
• Eseguire le procedure di test in fase di integrazione HW/SW;
• Preparazione del reporting e documentazione di sintesi per riunioni di avanzamento (i.e., review meeting).

V&V Test Engineer

Hardware Engineer

• Concept development for complex functions and systems.
• FPGA design and analysis.
• Production of material for design reviews.
• Development of test planning, integration and design verification.
• Ensure that all firmware designs follow the company firmware process.

Firmware/FPGA Engineer – All Levels

Engineer

• Conduct thermal analysis of mechanical designs to assess performance and safety using thermal analysis software, CFD techniques, and classical hand calculations.
• Provide expert guidance on cooling strategies and recommend thermal design improvements as required.
• Advise on materials and manufacturing techniques with an emphasis on thermal performance and mechanical integrity.
• Define thermal requirements and develop methods for verifying compliance across Leonardo products.
• Drive innovation in thermal design, introducing new technologies and methodologies.
• Support product development through all phases—from design and testing to final certification.
• Deliver thermal solutions that meet performance requirements on time and within budget.
• Contribute to technical documentation, including material for peer reviews and stage/gate approvals.

Principal Thermal Engineer

• Support delivery technology exploitation projects, maintaining control of scope, schedule, cost, quality, risks, and dependencies to meet Future Programmes objectives.
• Develop and manage integrated delivery plans, monitoring milestones and proactively resolving delivery issues through appropriate governance.
• Act as the delivery focal point across multiple LoBs, managing interfaces, dependencies, and alignment with senior engineering and business stakeholders.
• Apply robust governance, reporting, and control, including LCM compliance, financial tracking, forecasting, assurance, and change control.
• Drive continuous improvement, capturing lessons learned, applying best practice project management, and supporting delivery maturity growth.

Senior Project Manager

Systems Engineer

• Development of Requirements and Test Plans
• Control of Parts and Documentation, including change management
• Collaboration with multi-functional teams on system and sub-system development for Tempest and the Global Combat Air Programme (GCAP)
• Work with suppliers, integrators, and users across the UK
• Engaging with stakeholders, defining requirements for a new system
• Conducting cost and functional performance trade-offs and evaluation of proposed solutions
• Modelling a system to understand observed simulated performance
• Development of capability within limitations and constraints of the target hardware
• Designing and conducting testing and trials to prove equipment function and performance
• Opportunities to lead technical activities and initiatives
• Mentoring and coaching other engineers
• Creating and delivering reports, and proposals to customers and industry partners
• Supporting knowledge sharing and exploitation of good practice

Senior Systems Engineer

• Defining and developing system requirements
• Leading concept studies and system trade-offs
• Prototyping new technologies
• Solving integration challenges and testing solutions
• Working with industry partners and sharing knowledge

Lead Systems Engineer

• Use safety analysis skills across the full system lifecycle: from requirements analysis (including bids and contracting); through design, development; to system integration, acceptance testing, delivery and in-service support.
• Identify hazards and investigate these using functional failure analyses and other techniques, identifying the necessary mitigations to reduce safety risks, and taking part in design trade-offs to implement them.
• Evidence your decisions using the data available to you, through fault tree analysis, scenario analysis, and various other techniques.
• Contribute to continual improvement of the Company Product Safety and Environmental Impact Management System.