Lear Corporation

Systems Engineer

• Assuring the correct functioning of the quality system in the manufacturing plant
• The accomplish of customer specifics requirements
• Lear QOS leadership, deployment and mastery
• Plant QOS Document Control
• Quality Training / Induction for new operating personnel
• Internal & External Audits scheduling and lead
• Verify customer systems to ensure all reported issues have been addressed
• OEM portal maintenance – Certification data
• Support to Supplier Quality & Quality Control Activities: IATF Decertification Process to critical Providers
• Global & External Projects Support: Innovation and IDEAS CEO strategy support for NA region

Quality Systems Engineer

Engineer

• Direct contact with the customer.
• Quickly and effectively report any issues found with the customer.
• Coordinate with the plant’s Quality Engineer on corrective actions and follow-up.
• Monitor the status of customer-reported concerns until their closure is ensured.
• Verify customer systems to ensure all reported issues have been addressed.
• Coordinate defect analysis and customer response meetings in collaboration with the Plant Quality Engineer.
• Generate quality performance reports based on customer metrics and scorecards.
• Follow up on activities related to IATF 16949, ISO 14001, ISO 9001, and internal & external audits.

Quality Resident Engineer

Project Manager

• Leading, Supporting, Implementing, and Managing Automation projections while driving innovation in advancements.
• Provide leadership for projects including scope, risk, timing, cost, and quality.
• As the customer main point of contact, you will spend most of your time communicating and facilitating the design and build process and ensuring customer satisfaction.
• After project completion you will share best practices and lessons learned in monthly BP review.
• Act as the driving force for the team, promoting cooperation, conflict resolution & negotiation.

Automation Project Manager

SDET

• Analyze assigned System & SW requirements for their verification
• Records & reports on clarifications or possible misunderstandings and/or changes to specifications
• Define test cases for System & SW requirements verification
• Execute defined test cases to verify that the system & software comply with the system & software requirements
• Report the discrepancies found during the test of the system
• Set up and maintain the test equipment
• Maintain traceability between system & software requirements and System & SW test cases
• Verify the resolution of software defects
• Report on identified risks within a development project
• Provide test technical support and feedback to development team members on SW defects found and any other SW issue
• Maintain test documentation updated according to the defined processes and procedures
• Maintain the integrity of the test artifacts baselines by using the CM system according to the established CM procedures
• Design test cases to verify the system item interactions.
• Perform the verification of the system item interactions according to the defined test specification.
• Define and execute test cases for System Integration Test to verify that the System is consistent with the system architectural design.

Systems Test Engineer

Controller

• Report, follow & resolve any issue or risk relevant to inventory control operation
• Work closely with warehouse, procurement, operation & engineering to solve issues related to materials flow
• Perform daily analysis to predict potential inventory problems
• Deep Dive into the problems and conduct RCA to identify possible solutions
• Ensure inventory accuracy in WIP (Cycle Count, Spot count), identify & understand root cause of GAPs, establish action plan for non-recurrences according to LEAP procedures
• WTW leader: Prepare and coordinate the WTW in plant, according to LEAR procedures
• Maintain updated and accurate records of inventory
• Ensure correct transactions in QAD
• Ensure periodic statistical information to manager regarding trends as related to inventory levels
• Successful all audits in Plant (IATF, FOA, Customers audit…)
• Support continuous improvement in plant

Inventory Controller

Manager

• Ensure solid financial performance and disciplined operational execution
• Foster a "Zero Defects" mindset
• Maintain a safe work environment
• Supervise daily metrics and protect program launches

Plant Manager

• Develop and control engineering releases, process changes, and efficiency improvements.
• Apply quality tools such as PFMEA, Control Plan, Process Flow, and Core Tools.
• Support multifunctional teams in implementing best practices and lessons learned.
• Ensure compliance with IATF standards and customer-specific requirements.
• Perform cost analysis, cycle time estimation, and process flow evaluation for existing and new products.
• Collaborate with the cost engineering team to estimate manufacturing costs and optimize resource utilization.
• Work closely with customers and internal teams to align SMT and backend processes with OEM and Tier 1 supplier requirements.
• Support customer audits and technical reviews by providing process documentation and validation reports.
• Train manufacturing and engineering personnel in best practices for SMT, backend processes, and troubleshooting techniques.

Senior Advanced Process Engineer

QA Engineer

• Review and assess the supplier quality, the component PPAP and the conformity of received material.
• Monitor the suppliers action plan and confirm its effectiveness
• Promote CI culture & propose ideas with value added.
• Put in place the incoming organization and the components inspection.
• Monitor the supplier claims (Investigation, G8D, effectiveness...)
• Ensure the components PPAP approval.
• Conduct the Fit and Function of the new components.
• Ensure compliance with component supplier recommendations.
• Audit the component warehouses, picking area and trucks.
• Monitor the component shelf life and the storage conditions.
• Monitor the supplier component change.
• Identify the worst suppliers and follow the effectiveness of their action plan.
• Comply with internal and corporate procedures.
• Participate on the control plan and PFMEA elaboration and Ensure the execution of the control plan.
• Ensure the usage of problem-solving methodologies and the quality tools by the suppliers.
• Ensure accurate reporting of the quality KPI’s.
• Meet the customer objectives and satisfy their requirements and audits.
• Coach and develop the quality team under your responsibility & support them in the execution of the daily tasks.

Supplier Quality Assurance Engineer

• Review in plant, manufacturing prototype parts and follow up with the customer performance during these prototype phases.
• Coordinate PPAP process, compile PPAP information and submit PSW on the product estimated date during engineering changes, launches or when required by the customer
• Participate on process-FMEA
• Conduct PPAP activities planning and customer specific requirements.
• Update information on time to Profile Creation of control plan
• Implement the operator instructions (selfcontrol) for the new projects.
• Following the PPAP checklist and the open issues.
• Fulfills Lear’s Environmental and Quality Policies and Procedures
• Consultation of customer portal or B2B portal
• Customer's KPI monitoring through B2B/portal or standard communications
• Project milestones follow up and PPAP validation.

PPAP Engineer

QA Automation Engineer

• Identificar, diagnosticar y solucionar fallas de manera precisa.
• Garantizar la disponibilidad de los equipos en planta.
• Apoyar en proyectos de ahorro y de mejora continua mediante la automatización y uso de IA.
• Análisis de fallas y planeación de prevención de estas.

Controls & Automation Engineer – Specialist

Accounting Manager

• Ensure all month-end close activities for the assigned division are completed accurately and on time
• Manage and follow up on requirements for SOX and E&Y audits to ensure seamless reporting
• Review monthly reconciliations and journal entries for intercompany accounts, prepaids, and distribution
• Collaborate with Plant Purchasing Departments to track and manage new lease agreements
• Prepare and deliver timely monthly freight analysis for each entity

Division Accounting Specialist

Backend Engineer

• Provide support to product engineers in the launch of new products, including the design of the production line and processes.
• Contribute to cost reduction and to the development of production techniques for new products.
• Review functions and specifications to determine construction and operational details, considering factors such as manufacturability, interchangeability of parts, ergonomic conditions, inspection, and maintenance.
• Develop new and improved process techniques and equipment to achieve acceptable manufacturing capability based on customer requirements and develop acceptance criteria for machines.
• Participate in equipment installation, decide on test-machine acceptance as required, release equipment jointly with Quality, and hand over to Production after demonstrating capability through a Run and Rate.
• Plan and develop process specifications and assembly instructions.
• Update them based on process improvements and needs.
• Develop methods, tools, and equipment usage to increase production efficiency and reduce costs.
• Investigate and resolve manufacturing problems related to assembly and electronic product processes.
• Perform a variety of complex engineering and technical duties to ensure product and process compliance with customer specifications.
• Demonstrate a high degree of initiative and judgment in solving manufacturing problems.

Process Engineer – Backend

Account Manager

• Responsible for commercial ownership of complete seat programs.
• Negotiate series projects and contracts with customer on from Buyer to Senior Management level.
• Customer relationship management – OEM Buyer / Purchase Manager / Lead Engineers / Module Leaders / Piece Cost Engineers / Vendor Tooling Cost Engineers
• Manage negotiation and closure of commercial issues with timely conclusion
• Manage sales account with P&L responsibility, cost and pricing management and profitability ownership from project inception through to SOP
• Deliver program(s) with committed financial metrics
• Deliver engineering change quotations in line with agreed customer timeline.
• Maintain internal reporting
• Support business case approvals.
• Report out program commercial status to senior level
• Follow up on aging debt / drive cash-in collection in line with forecast dates

• Develop and support standards for equipment, automation, controls, and manufacturing processes.
• Contribute to the creation of the Industry iDEA playbook aligned with corporate strategy.
• Design and validate fixtures and mechanical solutions for new deployments.
• Lead installation and commissioning of equipment and projects at plant level.
• Coordinate resources with plant teams during installation and testing phases.
• Support on-site trials and feasibility studies across different locations.
• Ensure full compliance with Lear EHS standards and local regulations.
• Deliver user training and documentation for plant stakeholders.
• Conduct and document technical analyses to support solution feasibility and implementation.

Project Engineer – Industry 4.0

• Support the plant’s financial operations by ensuring accurate reporting, strong internal controls, and reliable budgeting and forecasting
• Assist the Financial Controller in corporate and internal reporting
• Assist in budget and short-term forecast preparation, profit and loss, cashflow and balance sheet
• Manage 3 direct reports
• Manage key KPIs including Accounts Receivable and Accounts Payable aging
• Full responsibility for Free Cash Flow forecasting, monitoring and reporting
• Pursue Continuous Improvements to financial controls and other operational processes
• Undertake Judgmental Reserves Schedules and Accrued Liabilities reporting
• Perform SOX Testing Reviews and present findings to the Financial Controller
• Conduct Preliminary Balance Sheet Reconciliation Reviews
• Calculate and report Warranty exposure
• Conduct Product Profitability Analysis and Reviews
• Manage and complete month-end processes including variance analysis
• Report plant performance through Hyperion
• Work closely with external auditors for year end and interim audit work
• Review and sign off headcount
• Review, maintain and implement internal controls including quarterly SOX testing
• Develop direct report heads to achieve personal and professional goals
• Support Financial Controller in management of two stock-takes annually
• Complete ad hoc tasks as required
• Support other team members as required