Operator

• Operate production equipment used to manufacture dual wall end caps based on business requirements
• Start, monitor, and maintain machine operations while accurately recording operational data
• Produce end caps for wiring, tubing, and cabling applications according to specifications
• Review work orders and production schedules to determine material requirements, dimensions, and tolerances
• Meet production and quality standards while minimizing scrap and performing required size changes
• Operate multiple machines simultaneously and follow packaging procedures, product specifications, and process requirements
• Complete production, material, and labor reporting accurately
• Support Health, Safety & Environmental initiatives and contribute to an Incident and Injury Free workplace
• Follow Leader Standard Work requirements and operate equipment safely and effectively
• Assist with training new and junior employees using established control plans
• Perform additional duties as assigned by management

Machine Operator manufacturing dual wall adhesive end caps for Mattr’s heat-shrink products

Machine Operator

Machine Operator manufacturing dual wall end caps with internal adhesive for wires, tubes, and cables.
Operating production equipment, meeting quality standards, and supporting safe, efficient manufacturing at Mattr.

• Set up and operate multiple machines
• Use computer-controlled setups and HMI interfaces to adjust programs or machines
• Load and unload products from multiple machines
• Gauge products to ensure proper dimensions
• Inspect products for visual characteristics and defects
• Check product samples using assigned inspection tools and record results according to process standards
• Place products into appropriate racks
• Separate scrap from good product and document accurately
• Scan correct production information
• Maintain machine tooling
• Train new operators when required
• Troubleshoot moderate to complex quality and machine issues
• Follow safety procedures and process documents
• Process products according to routings, specifications, quantity, and style requirements
• Meet daily departmental production goals
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts
• Run orders by due date and modify tooling as required

CNC Operator I producing precision industrial tooling components for Kennametal in Orwell, Ohio

CNC Operator I

CNC Operator I running multiple machines and inspecting precision products for Kennametal, an industrial tooling and wear-resistant solutions company.
Working third shift in Orwell, Ohio, while maintaining tooling, quality records, and production standards.

• Set up, run, train, and troubleshoot MPL automated Calvary labeling and packing machines
• Scope inserts to verify visual characteristics
• Scan correct production information
• Set up printers and verify labels, numbers, and product amounts against route card information
• Perform light maintenance, preventive maintenance, and troubleshooting of machine inaccuracies
• Gather and verify raw materials according to route cards
• Follow standard operating procedures to complete orders
• Maintain production for multiple lines while performing assigned duties
• Complete production records and required data entry
• Sustain 6S standards through housekeeping and standard work
• Follow company safety procedures
• Verify safety devices, machine guarding, and signage are present and functioning before releasing equipment for production
• Wear required PPE
• Follow the green insert control plan and ensure products meet routings, specifications, quantity, and style requirements
• Meet daily departmental production goals
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts

Auto Packaging Operator running automated labeling and packing machines for Kennametal’s industrial manufacturing solutions

Auto Packaging Operator

Auto Packaging Operator running automated labeling and packing machines for Kennametal, an industrial tooling and wear-resistant solutions manufacturer. Ensuring accurate production, maintenance, safety, and records across multiple lines.

• Operate PVD coating furnaces to coat carbide and Cermet inserts
• Load and unload fixtures with product into furnaces
• Ensure products are correctly set up and sufficiently clean
• Enter product weights, coating cycle information, and related data into a computer
• Start and monitor the coating process
• Clean fixtures and base plates between heats
• Ensure adequate gas supply and replace gas tanks as needed
• Ensure targets and melts are adequate for the loaded process
• Test standards to verify coating thickness and adhesion meet specifications
• Perform batch cleanings at proper intervals
• Operate other equipment, including parts blaster, as needed
• Set up and separate product
• Keep the work area and equipment clean
• Follow inspection control plans and ensure products are processed according to routings and specifications
• Work toward daily departmental production goals
• Communicate safety, quality, and product issues with supervisors, team members, and across shifts
• Take responsibility for furnace performance and solve furnace-related problems using learned knowledge, reasoning, and consultation with supervisors and co-workers

PVD furnace operator coating carbide and Cermet inserts for Kennametal’s industrial tooling solutions

PVD Manufacturing Chemical Process Operator II

PVD furnace operator coating carbide and Cermet inserts for Kennametal’s industrial tooling solutions. Loading furnaces, monitoring coating cycles, testing quality, and meeting production specifications.

• Set up and program operating machines, including accuracy and effectiveness checks in first test sequences
• Oversee machine ramp-up after setup and support Operators in operating machines
• Support maintenance with machine repair, downtime prevention, and inspections
• Follow documented procedures and processes and maintain accurate records and tracking
• Check finished products/product components and submit them for approval
• Follow safety and production rules and ensure proper use of PPE at all times

CNC machine setup operator supporting Schaeffler automotive, aerospace, and industrial manufacturing

Set Up Operator II – CNC

CNC machine setup operator supporting Schaeffler’s automotive, aerospace, and industrial manufacturing operations in Wooster, Ohio.
Programming machines, verifying product quality, supporting maintenance, and ensuring safe production procedures.

• Set-up, adjust, and operate equipment to produce parts to print specifications
• Inspect parts
• Change tooling as needed
• Use a hoist or lift truck to move parts as needed

Machine Operator producing parts at Crown Equipment Corporation

Machine Operator – 2nd and 3rd Shift

Machine Operator producing parts for lift trucks at Crown Equipment Corporation. Responsibilities include operating equipment, inspecting parts, and problem solving in a manufacturing setting.

• Prepare machines for the production program by tooling and parametrization according to work order information.
• Check production status within and in between each production sequence and taking action in case of deviations.
• Perform operations while controlling machine/production processes and follow documented procedures and processes.
• Inspect manufactured parts, identify defects and discard defective parts and follow proper protocol.
• Support maintenance in the repair, prevention of downtime and inspection of machines.
• Follow all safety and production rules and ensure proper use of personal protective equipment (PPE) at all times.

Operator II responsible for machine operations in battery plant

Operator II, Battery Plant – 2nd Shift

Operator II responsible for machine operations, ensuring production quality, and following safety protocols in a battery manufacturing environment in the US.

• Supports Sofidel America’s Good Manufacturing Practices and HACCP
• Responsible for set-up, operation, adjustment, and change-over of packaging equipment
• Collaborate with other staff to achieve production rates
• Perform basic maintenance tasks
• Document quality control and production issues
• Obey established housekeeping rules and maintain a clean work area

Packaging Operator supporting paper production for Sofidel America

Packaging Operator

Packaging Operator supporting paper production at Sofidel America. Operating equipment and ensuring compliance with safety standards in a manufacturing environment.

• Operates a combination of Cathode Ray Tube (CRT)/keyboard/Voice Communication System (VCS) to simulate the actions and communication of pilots and remote Air Traffic Control (ATC) facilities during training exercises
• Receives voice commands from students
• Responds to students via the VCS utilizing proper phraseology
• Inputs proper entries into the automated system to simulate pilot actions
• Translates displayed information into appropriate ATC terminology

Remote Pilot Operator simulating ATC communication during training exercises

Pilot Operator, Field

Remote Pilot Operator managing voice communication for pilot training exercises. Responsible for simulating actions and responding to students with proper communication techniques.

• Set up and programming of operating machines including accuracy and effectiveness checks in first test sequences
• Oversee ramp up of machines after setup procedure and support Operators in operating the machines
• Support maintenance in the repair, prevention of downtime and inspection of machines
• Follow documented procedures and processes and maintain accurate records and tracking
• Check finished product/product component and submits for approval
• Follow all safety and production rules and ensure proper use of personal protective equipment (PPE) at all times

Set up Operator II (CNC) managing machine operations and ensuring production quality

Set Up Operator II, CNC – 3rd Shift

Set up Operator II (CNC) managing machine operations in manufacturing environment. Responsible for setup, programming, and quality checks of operating machines.

• Operate an overhead crane with a remote control
• Load and off load steel plate and parts to and from inventory, rail cars and trucks
• Ability to manipulate and maneuver crane controls to regulate speed and direction of crane
• Use proper and safe loading and unloading procedures
• Report equipment safety issues immediately upon inspection
• Forklift operation
• General Labor
• Operating a hand grinder
• Tape measurements

Crane Operator operating overhead crane in Clarington, OH

Crane Operator

Crane Operator operating overhead crane with remote control in Clarington, OH. Loading and unloading steel plate and operating basic machinery for general labor tasks.

• Measure and weigh chemical ingredients, according to procedure.
• Read and understand batch procedures and work instructions including related MSDSs (material safety data sheets).
• Record operational data, such as weights, ingredients used, processing times, or test results.
• Draw samples of products for the Analytical Department.
• Notify internal resources as directed to troubleshoot technical issues with equipment.
• Operate equipment for chemical purification or reaction during product processing.
• Adjust controls to regulate temperature, pressure, and flow as directed by supervision.
• Collect product samples for QC analysis at designated stages to assess chemical properties.
• Retrieve analytical results via SharePoint and SAP.

Operator responsible for producing products and packaging materials at Heraeus Epurio

Operator producing products and packaging materials for Heraeus Epurio LLC. Responsibilities include measuring, weighing chemical ingredients and operating safety equipment.

• Responsible for hands-on maintenance, repair, and installation of systems and equipment
• Perform routine maintenance tasks such as lubrication, cleaning, and minor adjustments
• Conduct regular inspections of machinery and equipment to identify potential issues
• Assist in basic repairs and troubleshooting under the guidance of a maintenance technician
• Follow preventive maintenance schedules to ensure equipment reliability
• Maintain accurate records of maintenance activities and report any issues to the maintenance technician
• Adhere to safety protocols and ensure a safe working environment
• Provide support to the maintenance technician during complex repairs and maintenance tasks

Maintenance Operator responsible for hands-on maintenance and repair at Bekaert

Maintenance Operator

Maintenance Operator responsible for hands-on maintenance and repair of systems and equipment at Bekaert. Ensuring safety compliance and performing inspections, repairs, documentation.

• Prepare machines for the production program by tooling and parametrization according to work order information
• Check production status within and in between each production sequence and taking action in case of deviations
• Perform operations while controlling machine/production processes and follow documented procedures and processes
• Inspect manufactured parts, identify defects and discard defective parts and follow proper protocol
• Support maintenance in the repair, prevention of downtime and inspection of machines
• Follow all safety and production rules and ensure proper use of personal protective equipment (PPE) at all times

Operator II handling machine setups and inspections for Schaeffler

Operator II – MHT, 2nd Shift

Operator II preparing machines for production and inspecting manufactured parts at Schaeffler. Ensuring operation processes and equipment maintenance in a manufacturing environment.

Operator II operating machinery for production at Schaeffler

Operator II - VS7 - 3rd Shift

Operator II at Schaeffler responsible for tool preparation and machine operation in a manufacturing environment. Ensuring quality and adherence to safety protocols while supporting production efficiency.

• Set up and programming of operating machines including accuracy and effectiveness checks in various test sequences
• Oversee ramp up of machines after setup procedure and support Operators in operating the machines
• Support maintenance in the repair, prevention of downtime and inspection of machines
• Follow documented procedures and processes and maintain accurate records and tracking
• Check finished product/product component and submit for approval
• Follow all safety and production rules and ensure proper use of personal protective equipment (PPE) at all times

Set up Operator III for operating machines in manufacturing at Schaeffler

Set Up Operator III – Transfer Stamping

Set up Operator III for operating and programming machines in manufacturing at Schaeffler. Collaborating with operators and maintenance to ensure efficiency and safety.

Operator II handling machine setups and inspections in a manufacturing environment

Operator II, Packer – 1st Shift

Operator II role focusing on preparing and inspecting machinery for production at Schaeffler. Responsible for maintaining safety protocols and operational efficiency in manufacturing.

Operator II handling production machinery in a manufacturing environment

Operator II – 2nd Shift

Operator II preparing machines for production and controlling manufacturing processes. Inspecting parts for defects and collaborating with maintenance for repairs in a manufacturing setting.

Operator II managing machine production processes for automotive manufacturing company

Operator II – 3rd Shift

Operator II managing machine production processes for automotive manufacturing company. Preparing machines, checking production statuses, and ensuring quality control of manufactured parts.

• Move sorted pallet stacks to appropriate staging area using Relogistics forklift equipment
• Forklifts must be operated with extreme care, adhering to company safety procedures at all times
• Hand-sorting wooden pallets, when required
• Repairing wooden pallets using a nail gun, when required
• Maintain a clean & safe working environment

Forklift Operator moving materials in Relogistics warehouse

Forklift Operator

Forklift Operator moving pallets and materials in North Canton warehouse for Relogistics. Operate forklifts and maintain a clean working environment while supporting production requirements.

Operator jobs in Ohio

See all jobs on JobTailor