Engineer

• Participate in and lead technical sessions related to HVAC and building mechanical system engineering and design.
• Develop practical, innovative solutions to HVAC and building mechanical engineering challenges.
• Coordinate and support vendor startup and execution activities, including Site Acceptance Testing (SAT).
• Lead and support startup activities for plant utilities, including: Black Utilities (chilled water, plant steam) Clean Utilities (WFI, Clean Steam) Waste and air systems.
• Execute the full Commissioning and Qualification (C&Q) lifecycle for utility and facility systems, including the development and execution of IQ/OQ/PQ protocols.
• Bridge engineering, commissioning, and validation activities by supporting the transition from vendor startup and construction to formal commissioning and qualification.
• Perform field walk-downs and P&ID redlining to ensure “as-built” accuracy during the transition from construction to validation.
• Ensure HVAC, mechanical, and utility systems comply with current Good Manufacturing Practices (cGMP).
• Develop, review, and maintain technical documentation, including SOPs, requirements specifications, testing protocols, summary reports, and field turnover packages.
• Collaborate with cross-functional client teams to lead and support project initiatives, plans, and workstreams, ensuring high-quality and timely deliverables.

Fill/Finish Process Engineer

• Execute specific technical tasks within a project, ensuring high-quality deliverables.
• Perform CQV tasks, such as protocol development or equipment testing, under the Site Lead’s guidance.
• Report technical issues to the Site Lead and support resolution efforts.
• Ensure tasks meet client specifications, regulatory requirements (e.g., FDA, GMP), and industry standards.
• Create alignment with cross-functional client departments including but not limited to Validation, Manufacturing, Quality, Supply Chain, Engineering and Project Controls.

Validation Engineer III – Lead

• Execute specific technical tasks within a project, ensuring high-quality deliverables.
• Perform CQV tasks, such as protocol development or equipment testing, under the Site Lead’s guidance.
• Report technical issues to the Site Lead and support resolution efforts.
• Ensure tasks meet client specifications, regulatory requirements (e.g., FDA, GMP), and industry standards.
• Author technical documents: SOPs, requirements specifications, testing protocols, summary reports, etc.
• Identify and close individual knowledge gaps with support from other team members or leads as needed.
• Execute system and process validation protocols by using GxP best practices.
• Ensure billable targets are met each month as forecasted by respective site dashboards.
• Report workload or skill gaps within assigned tasks.

Validation Engineer I/II

• Perform engineering design tasks such as highway and street design, roadway alignments, roundabout design, roadway grading and modeling, curb ramp design, signing and pavement plan, maintenance of traffic, storm drainage.
• Assist the Project Manager in developing scopes of work, fee proposals, project budgets, and schedules.
• Help manage project financials, track progress, and ensure on-time, on-budget delivery.
• Perform designs using software including Microstation, OpenRoads Designer (ORD), AutoCAD, and/or Civil 3D.
• Mentor and develop emerging engineers and collaborate with Operations Leaders, Project Managers, and technical experts across the firm to strengthen our team.
• Help grow the practice, support proposal development, participate in client engagement efforts, and contribute to strategic pursuits with state and local agencies.

Transportation Engineer III

• Create scope of work documents, cost estimates, and schedules for assigned projects engaging engineering and other SME’s as required
• Build the project business case using reliability, integrated system planning, and other inputs
• Provide bid specifications to Supply Chain in accordance with the procurement process
• Compile detailed work plans for the Project Management Organization, Engineering, and Operations teams to execute
• Utilize Management of Change and Asset Governance processes for controlling the modification of equipment, systems, and processes
• Serve as a representative of the Company as assigned

Planning Engineer

• Manage the status of open tickets and complete technical and operational tasks to resolve issues and close tickets efficiently and correctly
• Work tickets based on SLA priority and expiration and update tickets daily
• Account for time by function and by the customer in ConnectWise with a high level of accuracy to include notes detailing customer work status to ensure continuity of service
• Completion of any other ticket classifications in adherence with the ITIL system of Service Delivery (Type, Subtype, Item, as needed)
• Deliver outstanding customer service on-site and remotely to customers
• Communicate progress and advise customers on account status, and changes, make suggestions, serve as coach regarding products/services and through processes
• Communicate and strategize with POD members on high-priority problems, critical status changes, customer matters, call aging, and training
• Based on customer and company needs, work after hours and on weekends for scheduled projects and in emergency situations
• Configuration, deployment, and installation of end-user workstations and client computers
• Installation of hardware to desktops, laptops, and servers. Including ram, storage drive, and graphics upgrades
• Preparing and staging network devices (servers, switches, firewalls) for remote configuration
• Create and Maintain client standard operating procedures for computer builds

Managed Services Engineer I

• Provide operational and technical support for Midstream Operational Technology (OT) environments
• Translate business and operational requirements into secure, reliable, and scalable technical solutions
• Collaborate with Operations, Process Control, and third-party vendors to troubleshoot issues
• Lead complex problem resolution and drive continuous improvement of OT systems
• Analyze performance data and provide recommendations for optimization

Senior OT Engineer

• Implement automation projects for material handling clients.
• Develop and implement PLC code for the material handling equipment.
• Review AutoCAD layouts and schematics to program the projects.
• Test PLC prototypes internally and on site for new/changes in the project.
• Assess programming and commissioning methods to ensure development of standard coding are met with Intelligrated standards.
• Executes all test plans on-site, both internal and customer acceptance/BUAT/UAT/FAT.
• Monitors and works from project tasks lists and timelines; reports progress on a regular basis.
• Assists with storing turnover documentation in proper location.
• Contributes to test plans (Internal, In-House, Site, Commissioning, and Acceptance).
• Attends weekly team meetings; reviews scheduled tasks/timelines.
• Be able to convey information concisely to inter-disciplinary teams and management.
• Report technical updates from the projects for tracking the status of the projects.
• Conduct customer training while on site regarding the use of machinery.
• Electrical drawings and schematics, using AutoCAD Schematics, Layouts and Network layouts in electrical design software and tools (AutoCAD Electrical preferred).
• Utilize electrical design principles and practices for electrical design.

PLC Controls Engineer I

• implements electrical projects as the Lead Engineer for an integrated system or sub-system
• provides planning, reporting and management of the electrical project
• takes full ownership of the electrical project elements and executes and/or delegate individual tasks throughout the project life cycle
• coordinates and forecasting electrical resources in-house and on site
• takes a systems approach in understanding core design features and overall electrical architecture
• manages the scope, budget, schedule, maintaining internal and external customer expectations

PLC Controls Engineer II

• Provide Combination Product and Medical Device Quality System Framework and Design expertise both within local operations and to drive best practices within the global organization
• Ensure that all applicable Combination Product and Medical Device regulations are incorporated within corporate and local procedures and are adequately implemented within the manufacturing site
• Assess, evaluate, identify and implement required documentation and studies to support requirements for launch, lifecycle changes and Business Development opportunities
• Stay up to date on regulations and regulatory trends to ensure that practices and procedures remain current with regulatory health authorities’ expectations with regards to Combination Products and Medical Devices
• Support Combination Product and Medical Device inspection readiness and regulatory inspection responses as needed
• Develop and ensure lifecycle management of a Quality Management System to be compliant with all relevant combination product and medical device regulations
• Facilitate and/or supports the development and implementation of combination product and medical device quality governance processes and procedures
• Lead and/or participate on departmental and/or cross-functional teams as Combination Product and Medical Device SME
• Perform gap assessments of processes and procedures against relevant device regulations
• Provide guidance on approach and regulatory responses support for health authority questions to support product approvals

Senior Engineer, Combination Products, Medical Device

• Lead and oversee transmission line project designs.
• Navigate the complexities of electrical transmission line design.
• Provide strategic input to the leadership team.
• Design transmission line segments using PLS-CADD or other structural design software.
• Develop design criteria documents and construction specifications.
• Prepare comprehensive construction packages, including structure details, material lists, staking tables, plan and profiles, and stringing charts.
• Estimate project costs, resources, labor, and materials and establish realistic deadlines and completion dates.
• Write, modify, and review specifications in compliance with NESC, IEEE, NEC requirements, and industry best practices.
• Conduct feasibility studies, routing studies, and EMF calculations to support project planning.
• Oversee project implementation, ensuring proper verification of foundations, structures, and equipment installation.
• Lead or assist with proposal preparation and business development initiatives.
• Travel to client sites for project definition and execution phases.
• Mentor and coach less experienced engineers and technicians.

Transmission Line Engineer

• Own engineering scope for multi-site/complex OSP builds (fiber & copper; aerial/UG; pole, direct-buried, and conduit).
• Produce and seal (where applicable) engineering plans, splicing diagrams, loss budgets, BOMs, and construction work prints.
• Perform advanced loop-loss and electronics sizing; plan field-mounted switch serving areas and network segmentation.
• Lead constructability reviews, value engineering, and route optimization; resolve clearance, capacity, and alignment conflicts.
• Direct and perform field surveys: pole, conduit, and buried-facility measurements; verify NESC clearances and make-ready needs.
• Ensure compliance with NESC, client specifications, and Pearce standards; conduct feasibility/economic analyses.
• Author redlines/as-builts; drive corrective actions from field QA findings to closure.
• Oversee complete permit packages (municipal/county/state) and coordinate ROW/easements to approval.
• Lead joint-use engineering (pole attachments, loading, and make-ready); coordinate with IOU/co-op/municipal utilities.
• Interface with agencies and utilities to resolve conflicts, accelerate approvals, and de-risk schedules.
• Build job budgets and forecasts; track actuals, changes, and variance drivers; recommend cost/schedule mitigations.
• Establish project KPIs (cycle time, rework rate, punch-list aging) and run continuous-improvement actions.
• Conduct periodic site inspections and formal QA/QC gates from design release through closeout.
• Maintain authoritative records (designs, permits, ROW, accounting/property records, as-builts).
• Prepare executive-ready reports/status dashboards; keep internal/client systems current.
• Partner with PMs, construction, permitting, and vendors to align milestones and dependencies; lead technical touchpoints.
• Provide technical guidance and mentorship to OSP Engineers I/II, designers, and permit staff.

OSP Engineer

• Create, maintain, and deliver various forms of end-user training content
• Work closely with both technical and end-user teammates within the organization
• Collaborate with cross-functional IT teams and business stakeholders to support enterprise collaboration initiatives
• Design, implement, and manage Active Directory domains, user accounts, group policies
• Administer and optimize Microsoft 365 services including Exchange Online, SharePoint Online, Microsoft Teams, OneDrive for Business
• Provide advanced troubleshooting and root-cause analysis for complex identity and collaboration issues
• Maintain comprehensive technical documentation, standards, and operational procedures
• Provide guidance and mentorship to associate- and mid-level engineers.

Senior Unified Collaboration Engineer

• Provide leadership for complex large event productions including audio controls, video controls, encoders, and streaming services
• Setup, test, and maintain equipment used for videoconferencing integrated room systems and special custom projects
• Design and develop audio, video, and data conferencing solutions using Audio, Video, and UI components such as Crestron/AMX control systems
• Create and maintain system and documentation for testing and validation of equipment
• Work in a team environment collaboratively
• Support Executives and their Admins in meeting setup & planning
• Troubleshoot issues quickly and communicate to the clients
• Maintain relevant and current knowledge and be a leader within assigned technical field
• Prioritize work efforts and multitask in a very fast-paced environment

AV Engineer

• Own the basic process design of unit operations and the deliverables that drive projects forward
• Develop the documented design basis, process descriptions, BFDs, PFDs, P&IDs, and material selection diagrams that define each project.
• Build process simulation models in Aspen HYSYS and develop heat and material balances.
• Perform hydraulic calculations and produce equipment sizing data sheets for compressors, pumps, heat exchangers, columns, separators, reactors, and more.
• Design and size safety relief devices that protect personnel, equipment, and the process.
• Interface directly with clients and provide field support throughout project execution.
• Deliver work that meets quality standards and applicable codes — on schedule and within budgeted hours.

Senior Process Engineer

• Provide operational leadership for the engineering team, ensuring machinery and systems operate safely, efficiently, and cost-effectively while achieving 100% uptime through reliability-based maintenance practices.
• Implement equipment inspection and monitoring programs, define maintenance best practices, and continuously evaluate operations to enhance effectiveness and maximize performance.
• Supervise engineers and maintenance staff, manage contractor activities, ensure regulatory compliance, and maintain all infrastructure documentation.

Chief Building Engineer

• Play a hands-on role in delivering innovative engineering solutions
• Lead detailed design efforts across complex projects
• Perform engineering calculations and power system studies
• Collaborate with cross-functional teams to deliver cohesive solutions
• Engage with clients through site visits and project discussions
• Mentor junior team members and contribute to continuous improvement initiatives

Electrical Project Engineer – Industrial Power Systems

• Develop, test, and validate mathematical models, numerical algorithms, prototypes, simulations, data analysis and data synthesis
• Learn about and work with a variety of data types, including raw or derived data originating from GNSS receivers, communications systems, radio frequency systems, and other space and ground-based sensing modalities, as well as any related data formats
• Assist in shaping and refining new and existing products
• Provide subject matter expertise to the capture teams in the review and evaluation of funding opportunities and the subsequent bid and proposal process
• Support product demonstrations, business development, customer engagement, and company outreach functions
• Author or co-author various forms of internal and external reports, presentations and documents, including journal and/or conference papers
• Attend industry events to present the findings of your work and network with industry leaders
• Perform other duties as assigned (to be less than 10% of the responsibilities listed above)

Signals Engineer II

• Defines, maintains, and evolves standard modeling frameworks, structures, and requirements for enterprise planning and optimization tools
• Works closely with planning, scheduling, and optimization teams to align model structures, assumptions, and configurations with approved standards
• Leads efforts to harmonize model logic, constraints, and inputs across regions and assets to enable consistency, comparability, and scalability
• Provides technical guidance and hands-on support during deployment and configuration of standardized models
• Ensures model configurations comply with approved technical standards
• Participates in model exception and deviation reviews, providing technical analysis and recommendations for resolution
• Documents model assumptions, configurations, constraints, and decision logic to support transparency, auditability, and repeatability
• Identifies opportunities to improve model robustness, maintainability, and performance within established standardization frameworks

Senior Planning & Optimization Engineer

• Designing and evolving pipelines that enable efficient sharing of technology, systems, and tools across multiple projects
• Supporting and guiding teams through code and system merging processes, minimizing conflicts and ensuring consistency
• Driving and supporting refactoring efforts to improve modularity, maintainability, and reusability of existing systems
• Collaborating with engineers and technical leaders to identify opportunities for standardization and consolidation
• Reviewing architectures and implementations with a focus on scalability, modularity, and long-term sustainability
• Acting as a mentor and consultant for teams on best practices related to code sharability and cross-project development
• Driving adoption of shared solutions and reducing duplication of effort across the studio
• Identifying fragmentation risks and proactively proposing improvements to the overall tech ecosystem
• Contributing directly to shared systems, especially in areas that unblock multiple teams, and re-architecting solutions to be reusable across different contexts

See all jobs on JobTailor