Engineer

• Check on the technical details on the reports, the layout and the critical information required to deliver optimal results to our customers.
• Give feedback and rating on the quality of the surveyors.
• Brief the surveyors on the areas which they shall focus and on any technical information that they need to be aware of.
• Assist with information and support, whether technical clarifications are required from the OPS team.

Technical Consultant – Master Mariner, Chief Engineer

• Lead the delivery of HV and EHV (132kV to 765kV) AIS, GIS and HVDC Substations projects.
• Produce design drawings & documentation for Front End Engineering Design (FEED).
• Complete Detailed Design Deliverables – Circuit Diagrams, Wiring Diagrams, Cable Schedules etc.
• Interface substation auxiliary systems and other equipment with Protection & Control Systems.
• Complete design calculations – LVAC & DC System Sizing, CT & VT adequacy checks, Cable Sizing etc.
• Work on Fault Current Calculations, Relay Settings and IED Configuration as required.
• Preparation of bid documents and bid evaluations.
• Ensure interdisciplinary coordination.
• Contribute to Tendering activities by supporting with preliminary design documentation & drawings.
• Lead P&C design on a project and engage with junior engineers & graduate engineers.
• Mentoring other engineers and help them become better engineers.

Principal Engineer

• Develop a variety of C&I design documents such as design drawings, technical specifications, design basis, calculations, instrument selection with a high level of competence and minimal oversight.
• Work efficiently to ensure that the project schedules and budgets are met.
• Work independently and collaborate across disciplines and teams to meet project goals.
• Develop and perform quality reviews for detailed design documents.
• Prepare and review control deliverables such as Control Narratives, Cause and Effect Diagrams, System Architecture Diagrams, Instrument Location Layouts, Installation Details, Wiring & Interconnection Diagrams, PLC Layouts, and Loop Drawings.
• Prepare C&I lists such as equipment list, IO list, I/O assignment, Instrument Index, Serial Interface list, cable list, etc.
• Perform instrument sizing calculations and selection.
• Developing and reviewing Instrumentation Datasheets for instruments and valves.
• Provide configuration of and programming of controls equipment, including PLCs, HMIs, DCS Systems, etc.
• Participate in client and project review meetings.
• Preparation of reports such as Feasibility Study, Concept Design Reports, etc.
• Liaising with all stakeholders and responsible for all technical issues related to their area of specialization.
• Co-ordination with other discipline specialists where areas interface or overlap exist.

Senior Control & Instrumentation Engineer

• Improve oil and gas production safely and efficiently by handling wells, production systems, and surveillance data
• Lead core activities within an integrated group of bp and partners subsurface staff
• Collaborate with other departments and the India Shareholding team to define and implement short and long-term plans
• Promote a strong safety culture and ensure all programs evaluated for potential hazards
• Enhance utilization of area wellstock and production/injection systems to deliver production target

Petroleum Engineer

• Responsible for utilising broad reservoir engineering experience to advise reserves estimation, resources progression and the appropriate reservoir management activities
• Work across BP global portfolio on projects as diverse as early field development offshore West Africa, large-scale waterflood developments in the Caspian Sea and Middle East and global screening and development of Carbon Capture and Storage (CCS) fields
• Support region decisions on reserves estimation, reservoir management, and production forecasting
• Conduct classical reservoir engineering analyses, integrating rate and pressure transient analysis, material balance, decline curve and volumetric analyses into reservoir evaluation and reserves estimation
• Provide sound Reservoir Engineering technical analysis, judgement, and guidance to support identification, evaluation, and progression of value-generating resources
• Provide technical support and guidance in delivery of projects and progression of resources
• Apply reservoir engineering concepts to understand and optimize the production and recovery, including Rock and fluid properties, relative permeability, and depletion mechanisms

Reservoir Engineer

• Ensure overall health, availability, and reliability of BMS / IBMS infrastructure, including servers, gateways, controllers, and field devices
• Monitor and manage BMS system integration health, communication networks, and data flow across building systems
• Perform and support preventive planned maintenance (PPM) of BMS assets as per defined schedules
• Troubleshoot and resolve breakdowns, including: Gateway communication issues, Controller failures, Network and connectivity failures, BMS data point / mapping / trend issues
• Maintain and update BMS asset registers, system documentation, and maintenance records
• Coordinate with OEM / System Integrator service providers for IBMS asset AMC execution, service delivery, escalation management, and closure of service calls
• Support commissioning, testing, validation, and modifications of BMS systems during operational changes or projects
• Analyze alarms, trends, and reports to identify operational risks and improvement opportunities
• Support compliance with site SOPs, safety standards, and audit requirements
• Work closely with facility operations, electrical, HVAC, and IT teams for seamless integration and issue resolution
• Participate in project-related BMS activities, upgrades, and system expansions as required

Assistant BMS Engineer

• Responsible for installation, maintenance and calibration of all instruments in Apotex Research Pvt Ltd as per GMP/GLP requirements.
• Conduct duties following established Standard Operating Procedures.
• Perform maintenance and calibration of analytical instruments like HPLCs, GCs, pipettes, balances, etc.
• Monitor and support during instruments installations and qualifications.
• Prepare and revise instrument related SOPs.
• Maintain/Oversee all the instrument related qualification files, software validation reports, routine calibration records.
• Arrange vendor engineers for maintenance/calibration and maintain necessary AMC contracts with vendors.
• Update and maintain the Master list of instruments and calibration schedules.
• Monitor freezer/environmental monitoring system and respond to the alarms.
• Investigates and corrects analytical, instrumental, and procedural problems, if necessary.

Senior Associate – Instrumentation Engineer

• 3Pillar is an AI transformation partner helping enterprises build AI-native products.
• Collaborate with teams across North America, Europe, Latin America, and Asia.
• Engage with ambitious companies in financial services, healthcare, media, and technology.
• Work in an Agile development environment, focusing on real agentic transformation.

Senior Unqork Engineer

• Integrate optical modules into optical line cards and ensuring optical performance.
• Collaborate with XF team to improve the performance.
• Develop and implement test routine to evaluate key performance for coherent line modules.
• Create technical documentation, including test plans, test procedures and test reports.

Digital HW Engineer 3

• Handle customer issues and provide proactive support to ensure network stability and performance.
• Manage software updates and ensure smooth implementation across the IMS Core network.
• Analyze, configure, and integrate nodes/networks/systems, following best practices and industry standards.
• Troubleshoot and resolve complex issues related to IMS Core, SBC, TAS, CFX, and Oracle DSR components.
• Perform end-to-end coordination and analysis of IMS Network issues, including collaboration with hub locations.
• Utilize tools like Wireshark and internal system traces/logs for effective troubleshooting and debugging.
• Maintain and optimize the performance of the Core IMS Network (Nokia, ZTE & Huawei), ensuring high availability and reliability.
• Stay updated with the latest technologies and trends in Cloud Native Architecture, Microservices, and Docker.
• Collaborate with cross-functional teams to ensure seamless integration and smooth operations.

Fault Management L2 Engineer

• Perform 24x7 Level-4 technical support for satellite ground systems to peers/customers in- and outside the company as an established expert in the satellite and terrestrial ground engineering field and act as a trusted representative of the team and the company
• Perform system handover from Service Engineering team to SES operation team including: Deliver necessary training on ground system to SES operation/Customer. Prepare and deliver As-built system documentation. Active follow-up and closer of pending action item/ ground system deliverables.
• Ad-hoc basis support Ground System Integration team for in house integration of ground station components and subsystems including antennas, High Power Amplifiers (HPAs), switch matrix, up/down converters, modulators, inter-facility connection equipment and Co-lo space under the guideline of engineering team
• Ad-hoc basis support Ground System Integration team for in house integration of measurement, communications and monitoring and control systems (including Service IOT and M&C Systems) under the guideline of engineering department.
• Perform in house system upgrades for existing ground systems to bring them to latest technology level that SES needs to fulfil their mission on a global basis
• Perform Configuration and testing of ground station equipment and software.
• Perform remote configuration, management and troubleshooting of GW Infrastructure.
• Perform periodic calibration of ground systems as per the guideline of engineering team.
• Perform and participate in ground system integration and test and operational validation of the ground segment, including generation of test plans and procedures and participation in system acceptance testing, ground readiness tests and network readiness tests.

Engineer, Ground Systems

• Electronic power Steering system CAN Architecture development
• Design and development knowledge on 3 phase AC motors
• Steering system calculations understanding
• Coordinate with Electronics team & other interface team on understanding the communication of ECU's
• Excellent knowledge in CAN communicating tools
• Script development using Vector & Interpedis tools
• Test case preparation with Virtual ECU's for Software verification
• Discussion with Suppliers on Networking, Specification documents, Diagnostics
• Analysis of failure modes in the vehicle and preparing 8D for problem solving
• Assist CMVR team on steering validation and certification
• Creation of Standards on the Script generations and operating procedures

Senior Engineer – Steering & Wheelend

• Develop, implement, and continue to enhance ontologies, taxonomies, knowledge graphs, and related semantic artefacts for interconnected data, as well as topical/indexed query, search, and asset discovery.
• Provide thought leadership for strategic projects ensuring timelines are feasible, work is effectively prioritized, and deliverables met.
• Influence the strategic semantic vision, roadmap, and next-generation architecture.
• Execute on the interconnected data vision by creating linked metadata schemes to harmonize semantics across systems and domains.
• Analyze and implement knowledge organization strategies using tools capable of metadata management, ontology management, and semantic enrichment.
• Influence and participate in governance bodies to advocate for the use of established semantics and knowledge-based tools.

Senior Knowledge Engineer

• Responsible for technical proposals, costing/quotations and supporting Sales & Key Account teams for BIW & Chassis / Joining Technology projects.
• Perform process planning & analysis including layout, cycle time, welding feasibility, and assembly process design.
• Develop and optimize welding processes (Spot, Projection, Resistance, MIG/MAG).
• Lead fixture design review, prove-out, installation, and commissioning activities.
• Manage new project implementation as per GPCS/APQP guidelines and ensure milestone delivery.
• Handle quality issues (plant & customer), act as SPOC for Tier-1 suppliers, and implement corrective & preventive actions.
• Drive process improvements, cost reduction, productivity enhancement, and cycle time optimization.
• Plan facilities, tools, fixtures, layouts, and equipment for new projects.
• Monitor KPIs such as cycle time, JPH, capability, ergonomics, and NVA.
• Coordinate with customers, suppliers, and cross-functional/global teams; support audits and documentation.

Process Engineer

• Help design, build, and facilitate adoption of a modern Data+ML platform
• Modularize complex ML code into standardized and repeatable components
• Establish and facilitate adoption of repeatable patterns for model development, deployment, and monitoring
• Build a platform that scales to thousands of users and offers self-service capability to build ML experimentation pipelines
• Leverage workflow orchestration tools to deploy efficient and scalable execution of complex data and ML pipelines
• Review code changes from data scientists and champion software development best practices
• Leverage cloud services like Kubernetes, blob storage, and queues in our cloud first environment

Senior Engineer – Data & ML Platform

• Site walk-downs for data collection and I/O database preparation, database partitioning from Third Party DCS / PLC systems
• Design and implementation of power plant controls and protection Systems
• Process simulation & testing
• Design Review Meeting (DRM), Pre-FAT, Factory Acceptance Test (FAT) & clean­up after FAT
• Verification and functional testing of I/O interfaces to field devices and Supervision of control system installation, commissioning and start-up
• Compliance with internal and customer safety and security requirements and working with contractors / sub-contractors
• Encourage smooth partnership and communication with all project partners (internal project teams, customer, and on-site contractors)

Senior DCS Engineer

• Design and build automation-driven solutions and system integrations that reduce manual operational work and improve reliability across enterprise systems.
• Develop and maintain internal platforms and services that support identity management, enterprise applications, and secure access to company resources.
• Design, implement, and support networking and secure access technologies, including Zero Trust Network Access and identity-aware access controls.
• Apply engineering best practices such as infrastructure as code, version control, testing, and CI/CD to enterprise systems and automation workflows.
• Define and maintain architecture standards, design principles, and technical guidelines to ensure a consistent and scalable enterprise platform.
• Collaborate with internal teams to understand business needs and translate them into secure, scalable engineering solutions.
• Partner with Security and Compliance teams to support initiatives such as vulnerability management, patching, and incident response.
• Contribute to technical planning and implementation of complex cross-functional technology initiatives.
• Maintain documentation for system designs, integrations, and automation workflows to support long-term maintainability.
• Provide technical mentorship and guidance to team members while promoting a culture of engineering excellence and continuous improvement.
• Stay informed on emerging technologies and identify opportunities to improve platform reliability, security, and scalability.

Engineer II – Information Engineer

• Design, implement, and manage solutions for both Windows (physical and virtual) and Mac workstations
• Support a healthy device posture and operation throughout the workstation lifecycle
• Transition from traditional on-premises, domain-based compute to modern, cloud-managed endpoints
• Develop self-service scripts that enhance user-driven support and remediation
• Collaborate with cross-functional teams to ensure seamless integration and operation of workstation solutions into the zero trust environment
• Analyze and resolve production issues not resolved by Tier 1 or Tier 2 support
• Develop, facilitate, and maintain product support materials including run books, technical diagrams, and knowledge bases
• Make recommendations for improving the software lifecycle process (deployment, updates, removal)

Endpoint Engineer, Workstation Engineer – Intune Experience Required

• Develop new program capacity strategies, including operating patterns, cycle time targets, and line balancing.
• Define launch curves to support program milestones, build‑ahead plans, and launch cost estimation.
• Develop and maintain direct, indirect, and salaried labour staffing plans to meet programme labour targets.
• Create and maintain labour glide paths aligned with programme and business requirements.
• Support engineered Jobs Per Hour (JPH) re‑rates and post‑launch changes.
• Provide industrial engineering support for new powertrain programs (engine and transmission).
• Support manufacturing launch activities, program reviews, dashboards, and key metrics.
• Lead line labour planning for machining and assembly operations.
• Track labour performance, off‑standard labour, and improvement actions.
• Conduct time studies, MODAPTS analysis, workstation assessments, and ergonomic studies.
• Perform VA / NVA analysis, waste identification, and continuous improvement projects.
• Support Kaizen activities and plant improvement initiatives.
• Lead benchmarking studies to improve labour efficiency and capacity utilisation.
• Use Global Study Process Allocation System (GSPAS) or equivalent tools for time studies and allocations.
• Support development and maintenance of industrial engineering standards, documentation, and training materials.
• Apply digital tools, simulation techniques, and data analysis to optimise manufacturing performance.
• Explore AI / ML‑based approaches where applicable to improve planning, productivity, and decision‑making.
• Interface with global capacity planning and industrial engineering teams.
• Support documentation, audit, and governance of engineered labour metrics across programs.
• Work in a team‑based, cross‑functional environment with manufacturing, quality, and programme teams.

Manufacturing Engineer – Powertrain

• Development of infrastructure for O&M staff
• Ensure safe working condition in powerhouse for the staff
• Ensure proper implementation of O&M procedures in powerhouse
• Ensure availability of resources for staff to carry out day to day O&M activities in Powerhouse
• Budget planning for the site O&M expenses
• Authorize issue of work permits
• Authorize purchase of material and issue of material from store
• Act as key person between ANDRITZ and Client for all practical purposes
• Authorize annual maintenance schedule and annual overhaul plan
• Oversee day to day O&M activities at powerhouse and Dam
• Liaising with local community and local authorities for proper functioning of the O&M contract

See all jobs on JobTailor