Engineer

• Assist in the development and analysis of propulsion system components
• Perform engineering calculations and simulations to predict propulsion system performance
• Support the design, execution and documentation of propulsion system tests
• Contribute to technical documentation such as design specifications and engineering reports
• Collaborate with senior engineers and interdisciplinary teams

Associate Propulsion Engineer – Promontory UT

• Architect Agentic Workflows: Design and implement autonomous agents capable of handling multi-step reasoning, tool-calling, and error recovery.
• Operational Discovery: Embed with logistics and support teams to identify high-impact opportunities for agentic intervention.
• End-to-End Ownership: Own the entire agent lifecycle: Discovery → Agent Architecture → Prompt Engineering/Fine-tuning → Hardening → Production Deployment.
• Build for Reliability: Develop robust guardrails, evaluation frameworks, and logging systems to ensure agents perform predictably in a high-stakes supply chain environment.
• Contribute to the "Agent Hub": Document and publish reusable agent modules and toolsets to accelerate AI enablement across the entire organization.
• Rapid Iteration: Bridge the gap between "cool demo" and "production tool" by shipping small, gathering feedback from domain experts, and iterating fast.

Forward Deployed Engineer III

• Support the technical development of the Hypersonic Testbed vehicles' autopilot for precision at high Mach in Exoatmospheric and Endoatmospheric flight.
• Mature existing control algorithms and analysis tools.
• Tune the autopilot(s) for emerging missions.
• Participate in engineering review boards, technical interchange meetings, and critical milestone reviews.
• Determine and report incremental performance improvements.
• Respond to analysis package requests.
• Perform trajectory assessment and flight analyses.
• Collaborate with a team of GN&C engineers in an Agile environment to meet critical milestones.
• Develop and analyze GNC algorithms (Guidance, Navigation, Autopilot).
• Develop, verify, and validate complex 6 degrees of freedom vehicle models.

Hypersonic Testbed GN&C Engineer

• design, implement, and maintain observability solutions that provide deep insight into the health, performance, and behavior of PCE and cloud infrastructure
• collaborate closely with development, operations, and cross-functional teams to proactively identify and resolve issues, improve system performance, and optimize resource utilization
• leverage the full capabilities of the OpsRamp platform, including Metrics Collection & Analysis, Log Management, Alerting & Notifications, Automation, and Dashboards & Reporting
• design, implement, and maintain observability solutions with OpsRamp as the core platform
• ensure data accuracy, quality, and integrity across observability systems
• use OpsRamp data to troubleshoot performance issues and collaborate with development and operations teams to identify root causes
• continuously assess and optimize the performance and effectiveness of the OpsRamp platform

Observability Engineer – Active Secret Clearance

• Responsible for engineering design, project proposals and estimates, materials procurement, planning, scheduling, and coordinating projects on the intermediate high pressure (IHP) natural gas systems and related facilities.
• Provide engineering support to the Inspection group.
• Run pipe network analysis using modeling software to determine sizing and composition of natural gas mains and service lines.
• Determine system needs and requirements for projects.
• Perform calculations including gas system pressures, capacities, and economic feasibility.
• Manage projects, including preparing material quantities, price schedules, material estimates, requests for bid (RFB), reviewing bids and contract documents, managing change orders, and construction observation.
• Coordinate with government agencies, property owners, environmental, contractors, and other key project collaborators.
• Gather, compile, and analyze information and data used in engineering tasks.

Early Career Project Engineer

• Manage all discipline aspects of projects from inception through execution
• Develop and document the scope of work
• Size and specify instrumentation including pressure and temperature transmitters, flow meters, modulating control valves, regulators, on/off valves, and actuators
• Create datasheets and work with vendors to get quotes for instrumentation and valves for various applications
• Coordinate with process engineering team to select the appropriate devices
• Create schematics, termination drawings, or loop sheets for instrument wiring
• Design custom control panels to meet the project need
• Understand project success criteria and ensure client expectations are met
• Develop and track project costs
• Identify, document, and communicate changes to scope
• Identify and effectively respond to clients issues and needs
• Ensure value is provided to the client and develop & earn their trust
• Review and manage all project deliverables
• Coordinate and supervise project implementation, control project costs, monitor progress and quality of the project

Instrumentation & Controls Engineer

• Join a dynamic engineering team in the execution of client projects.
• Execute process designs primarily within the consumer products industry.
• Investigation and analysis of data to make sound process design decisions.
• Apply theory in a practical context to determine feasibility of design.
• Identify potential process upsets and malfunctions incorporating appropriate remediations.
• Apply commercially available technology for process execution.
• Maintain professional ethics in the application of codes and standards.

Process Engineer

• Maintain up-to-date project records and documentation
• Assist Project Manager in various project phases
• Coordinate with subcontractors and ensure timely delivery of project documents
• Attend meetings and represent the company as needed
• Monitor and enforce safety protocols
• Prepare and submit project reports, change orders, RFIs, and other required documentation
• Support business development efforts by marketing the company to clients
• Monitor and manage the products in ProCore and/or Microsoft Project
• Review construction documents, specifications, and stay up to date on industry standards
• Ability to analyze project data and generate reports

Construction Project Engineer

• Provide critical technical insight for the design, testing, commissioning, and placing in service of HV substation SCADA systems and complex revenue and controls metering schemes for the integration of PV, BESS, and Wind renewable projects.
• Review, comment, and approve SCADA systems designs, communication architectures, input/output schematics, and point assignments in accordance with applicable codes, standards, and procedures.
• Review, comment, and approve configurations of data concentrators, RTUs, HMIs, switches, and other SCADA-related devices.
• Support on-site commissioning and point-to-point testing of substations' SCADA systems.
• Review electrical drawings to interpret signal lists and develop SCADA graphics.
• Review, comment, and approve integration of SCADA systems to substation devices, relays, DFR, and meters utilizing various SCADA protocols.
• Review, comment, and approve FAT and SAT test plans developed by EPC contractors.
• Become knowledgeable with various Utilities, ISOs, and industry standards.
• Coordinate and lead with third-party consultants the metering scheme for Solar, BESS, and Wind Power plants, following interconnection agreements and power purchasing agreement requirements.
• Coordinate with other in-house engineering teams, such as substation engineering, SCADA, and OT, to ensure the proper installation, testing, and configuration of revenue and control meters and their subsequent connection to AES’s metering platform.
• Provide input to early substation designs, considering the number of meters and their respective location and purpose.
• Coordinate with the development, origination, commercial, and interconnection teams, the proper metering scheme logic, following local power utility requirements for auxiliary power and overall loss compensation schemes.
• Perform routine QA/QC data quality checks on output meter data to ensure accurate and reliable data to be used on multiple subsequent workstreams, such as generation forecasts and generation actuals.
• Gain proficiency in the software needed to collect, analyze, and report data for accurate MWh generation across the power plant fleet.
• Collaborate cross-functionally with accounting and performance engineering to create efficient and accurate generation dashboards.

HV Substation SCADA & Metering Engineer

• Monitors process performance and identifies opportunities for improving yield, energy efficiency, and reliability.
• Assists in plan test runs and develops projects to address opportunities.
• Supports collaboration with operations, engineering and maintenance teams to resolve operational challenges.
• Develops relationships with console and field operators.
• Participates in hazard evaluations, incident investigations, and management of change.
• Participates in Process Hazard Analysis (PHA).
• Supports turnaround/outage execution.
• Maintains and updates process documentation.
• Troubleshoots and maintains unit mass balance within tolerance.
• Participates in technology advisory groups.

Process Engineer 1 – Intern to Full-Time Conversion

• Participate in the development of underground mining studies ranging in level of detail
• Provide expert mine planning support using your operations experience and Deswik Mine Planning software
• Support due diligence and technical audits
• Act as peer reviewer of drawings, specifications, mine planning, and technical reports
• Support the development of capital and operating cost estimates
• Lead project teams performing trade-off and optimization studies including but not limited to mine access, material handling, ventilation, and mining methods
• Domestic and International travel with the possibility of extended stays may be required.

Underground Mining Engineer

• Responsible for the development and maintenance of automated tests for software used by insurance professionals
• Write and execute automated and manual testing as part of regression and release cycles
• Contribute to the maintenance and improvement of automation frameworks and test suites
• Identify, document, and track defects through resolution
• Collaborate with developers and product partners on requirements and acceptance criteria
• Use AI-assisted testing techniques to improve effectiveness

Test Auto Engineer II

• Assist in designing and implementing manufacturing processes, tools, and fixtures
• Help identify and resolve production issues, defects, and assembly challenges
• Conduct time studies and process analysis to improve efficiency and reduce costs
• Collaborate with engineering, quality, and production teams
• Use Power BI to analyze data, identify trends, and provide insights
• Track and report key metrics such as throughput, efficiency, downtime, and quality
• Support continuous improvement using Lean and Six Sigma methods
• Ensure compliance with safety and quality standards
• Assist in selecting and qualifying new equipment and technologies
• Perform root cause analysis and support corrective actions

Manufacturing Engineer

• Provide specialized expertise in structural systems supporting the Defense Health Agency (DHA)
• Ensure structural integrity assessments are accurately captured in the DHA database
• Provide expert structural engineering guidance for complex healthcare facilities
• Develop strategic recommendations for facility recapitalization plans
• Evaluate building components and collaborate with cross-functional teams
• Assess structural conditions of medical centers, hospitals, and laboratories
• Ensure compliance with building codes and provide technical oversight for structural modifications

Structural Enterprise Engineer

• Serve as a technical leader for drinking water distribution system modeling, planning, and infrastructure evaluation projects;
• Lead development, calibration, maintenance, and application of hydraulic and water quality models for municipal water systems;
• Direct water system master plans, infrastructure planning studies, and long-term capital improvement programs;
• Perform and oversee hydraulic analyses related to system capacity, pressure management, storage operations, fire flow, reliability, and emergency response planning;
• Lead water quality evaluations including water age, disinfectant residuals, constituent tracking, source blending, and operational optimization studies;
• Develop and oversee field testing and model calibration programs, including pressure monitoring, flow monitoring, hydrant testing, and operational data collection;
• Integrate and analyze GIS, SCADA, AMI/AMR, billing, and operational datasets to improve model fidelity and support utility decision-making;
• Develop technically defensible infrastructure recommendations supported by hydraulic, operational, financial, and risk-based analyses;
• Prepare and review technical reports, memoranda, presentations, and planning documents;
• Collaborate directly with utility leadership, operations personnel, and executive stakeholders to communicate technical findings and implementation strategies;
• Mentor and develop junior and mid-level engineers while advancing modeling best practices across the firm;
• Support business development activities including client relationship management, proposal development, conference participation, and strategic growth initiatives.

Principal Water Distribution Modeling Engineer

• Lead FWT, installation, commissioning, testing, and handover activities on-site, acting as the single point of contact for the customer.
• Manage on-site presence throughout the project, ensuring coordination and smooth execution of all work activities.
• Plan, schedule, and coordinate service resources based on guidelines.
• Handle customer complaints or concerns quickly and professionally, in alignment with the Service Quality Manager to maintain good customer relationships and ensure repeat customers.

Site Manager – Resident Engineer

• Deliver safe, reliable, and efficient engineering and build solutions that adhere to codes, standards, and regulations.
• Provide technical mentorship and support to operations on engineering-related issues.
• Lead engineering activities such as standards, specifications, complex design reviews, HDD (horizontal directional drilling) designs, geotechnical reviews, engineering assessments, capital projects, and maintenance design initiatives.
• Drive integration efforts and support specification and standards management programs across the business.
• Build and maintain strong relationships with operations, construction, and other stakeholders to ensure alignment of engineering requirements, design reviews, and change requests.
• Participate in risk assessments, asset management reviews, and cross-functional initiatives to support safe operations and business outcomes.

Intermediate Engineer

• Improve manufacturing processes to increase efficiency, throughput, and quality
• Lead Lean and continuous improvement initiatives, including Kaizen, 5S, and waste reduction
• Support daily operations through technical problem-solving and process improvements
• Lead root cause analysis and corrective actions using structured methodologies
• Strengthen quality systems and compliance, including ISO 9001 and AS9100
• Support new product introductions, process validation, and standardization of best practices across sites

Regional Manufacturing Engineer, Quality

• The Process Engineer position is responsible for ensuring proper optimized operations to produce products and develop processes to ensure quality, cost and efficiency plans are met.
• Lead process design reviews, raw material qualification and product and process qualification and capability studies.
• Performs PPA/FMEA on all major process and raw material changes.
• Train production personnel on Statistical process Control (SPC).
• Conduct internal compliance audits of production tests, process specifications, plant change notices (PCN’s) and other in-plant processes.
• Co-ordinate Plant Trials with R&D and plant personnel.
• Standardize Manufacturing JSA’s, Standard operating procedures (SOPs) and work instructions to maximize the production departments productivity while minimizing wasted time and controlling cost.

Process Engineer II

• This position will require on-site major supplier surveillance and is a telecommuter position.
• In this position, the employee will be responsible for the quality of the products provided by the supplier.
• Responsible for Supplier Quality risk management develops and implements supplier quality evaluation and control systems.
• Assures supplier process and product quality, including contractual, regulatory, and technical compliance.
• Interfaces directly with supplier personnel and must be knowledgeable in and capable of assessing both supplier quality and manufacturing processes and procedures.
• Conducts product and process verification activities, monitors supplier quality performance, and drives root cause corrective action analysis for supplier quality issues.
• Manages supplier requests for waivers, deviations and discrepancy reporting process.
• Keeps management apprised of supplier performance, quality status, and risks.
• Coordinates and oversees Supplier Quality plan implementation through all program phases.
• Actively engages in supplier evaluation, qualification and selection as part of the Business Acquisition Process (BAP) and as new procurements are required on existing programs.

Engineer jobs in Utah

See all jobs on JobTailor