Mission Technologies, a division of HII

Engineer

• Lead and facilitate Lean initiatives including Value Stream Mapping (VSM), Kaizen events, 5S, Standard Work, Visual Management, and waste reduction (DOWNTIME).
• Drive continuous improvement projects focused on cycle time reduction, labor efficiency, yield improvement, and cost reduction.
• Establish and maintain standardized work instructions and best practices across manufacturing operations.
• Implement and track KPIs and metrics (OEE, FPY, takt time, throughput, scrap, rework) to measure performance and improvement.
• Coach and mentor operators, technicians, and engineers on Lean principles and problem-solving methodologies.
• Develop, document, and optimize manufacturing and assembly processes for mechanical, electrical, and electromechanical UUV subsystems.
• Create and maintain process flows, PFMEAs, control plans, routings, and work instructions.
• Support new product introduction (NPI) from prototype through full-rate production, ensuring manufacturability and scalability.
• Identify and implement tooling, fixturing, and automation solutions to improve consistency and productivity.
• Ensure manufacturing processes comply with AS9100 / ISO 9001, internal quality standards, and applicable defense requirements.
• Support root cause analysis and corrective actions using 8D, A3, DMAIC, and 5-Why methodologies.
• Collaborate with Quality, Supply Chain, and Engineering to resolve nonconformances and improve process robustness.
• Maintain documentation and traceability required for defense and government contracts.
• Partner with Design Engineering to provide DFM/DFA feedback early in the product development lifecycle.
• Work closely with Supply Chain to improve supplier quality, lead times, and cost through Lean practices.
• Support production planning and operations teams to improve flow and meet program schedules.

Engineer Manufacturing

• Supervise and direct a team of manufacturing engineers supporting UUV production programs
• Establish task priorities, allocate resources, and ensure execution in accordance with program schedules and contractual requirements
• Provide technical guidance, mentoring, and formal performance feedback to assigned personnel
• Enforce adherence to safety, quality, and configuration management policies
• Develop, review, approve, and maintain manufacturing processes, routings, work instructions, and standard operating procedures
• Ensure processes meet requirements for traceability, repeatability, and auditability
• Lead manufacturing readiness and process validation activities for new and modified products
• Support Design for Manufacturability (DFM) and Design for Assembly (DFA) efforts throughout the product lifecycle
• Provide day-to-day engineering support to manufacturing operations
• Lead root cause and corrective action investigations related to production nonconformances, test failures, and escapes
• Ensure timely implementation of corrective and preventive actions (CAPA)
• Monitor and report key manufacturing performance metrics including yield, rework, and schedule performance
• Ensure compliance with applicable quality management systems (e.g., ISO 9001, AS9100) and internal procedures
• Support internal and external audits, including government and customer audits
• Ensure manufacturing processes comply with applicable safety requirements for electrical systems, pressure vessels, energy storage devices, and subsea-rated hardware
• Maintain strict configuration control and support Engineering Change Order (ECO) implementation
• Collaborate with Design Engineering to support engineering changes, deviations, and waivers
• Coordinate with Quality, Supply Chain, Test, and Program Management to meet cost, schedule, and performance objectives
• Support supplier manufacturing reviews, technical interchange meetings, and production readiness assessments

Lead Manufacturing Engineer

Communications

• Maintain smooth operation of LAN, WAN, and VPN systems
• Install, configure, and secure Microsoft Windows-based clients and servers
• Plan and coordinate installation or reconfiguration of network hardware and software
• Administer routers, switches, firewalls, bridges, multiplexers, and gateways
• Implement STIGs and cybersecurity best practices across all systems
• Use enterprise patching systems to apply updates and maintain compliance
• Create and maintain network documentation, including procedures and system configurations
• Monitor performance and plan for future system capacity and network growth
• Troubleshoot connectivity and performance issues across enterprise systems
• Coordinate maintenance schedules and third-party support as needed

Field Services Support – Network Communications 2

Designer

• Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations
• Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA
• Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal
• Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications
• Exclude classifications in which incumbents predominantly perform drafting assignments
• Work closely with project managers, engineers, and other designers to ensure that designs meet project requirements
• Prepare and present design concepts and ideas to project teams and clients
• Stay up-to-date with industry trends and best practices in design

Electrical Designer, Designer 3

• Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations.
• Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA.
• Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal.
• Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications.

Entry Level Designer

Program Manager

• Provide overall program leadership, direction, and management to ensure successful execution of all contractual requirements
• Oversee daily operations, personnel performance, and workflow to deliver expert intelligence analysis services
• Interface effectively with senior military officials, government stakeholders, and internal leadership to communicate program status, risks, and performance
• Manage budgets, timelines, resources, and quality standards to ensure program success
• Support development, implementation, and refinement of program strategies, priorities, and objectives
• Lead, mentor, and supervise program staff to sustain high levels of performance and mission support
• Identify and mitigate risks while implementing process improvements to optimize program outcomes

Deputy Program Manager

Full-stack Engineer

• Develop high quality software solutions and lead a team of software engineers
• Translate functional requirements into scalable and supportable technical solutions
• Lead design and architectural discussions
• Ensure adherence to coding, testing, and deployment best practices
• Participate in the full software development lifecycle from planning to deployment
• Troubleshoot and resolve production issues to ensure system reliability
• Collaborate across cross functional teams to design, implement, and deploy customer focused solutions
• Provide leadership, align your team to goals, and support a positive, productive team culture
• Develop clean, well structured code following provided standards

Software Engineer – JLLIS Lead

Software Engineer

• Designing, optimizing, and governing the systems, methods, and flows that underpin production operations across all hardware programs
• Partnering with technology and product business groups to improve throughput, reduce waste, and enable cost-effective scale-up of complex defense systems
• Leading cross-functional teams to apply industrial engineering methods to make production operations more efficient, repeatable, and resilient
• Developing and owning capacity planning models that account for demand variability
• Establishing and monitoring manufacturing performance dashboards

Director of Industrial Manufacturing Engineering

• Responsible for providing program management oversight to a single customer requiring coordination of program requirements across planning stages with several subcontractors.
• Directs all phases of programs from inception through completion.
• Responsible for the cost, schedule and technical performance of company programs.
• Acts as primary customer contact for program activities, leading program review sessions with customer to discuss cost, schedule, and technical performance.
• Develops new business or expands services with the customer.
• Establishes milestones and monitors adherence to master plans and schedules, identifies program problems and obtains solutions, such as allocation of resources or changing contractual specifications.
• Directs the work of employees assigned to the program.

Program Manager – Mgr Programs 1

Project Manager

• lead and support information‑technology projects from initiation through completion
• plan, organize, and execute project activities to ensure delivery on time, within scope, and within budget
• collaborate closely with engineering, acquisition, and customer teams to support contract execution and meet program objectives
• manage project schedules, milestones, deliverables, and status reporting
• coordinate across engineering, acquisition, and customer organizations to ensure project alignment
• identify, track, and mitigate project risks and issues
• support documentation, planning activities, and contract execution tasks
• ensure project activities align with customer objectives and mission priorities
• develop clear, effective communication materials and brief stakeholders at all organizational levels

Manager, Project Management

Insurance

• Provide consulting and advisory support for management of the IAMD program
• Deliver subject matter expertise on operational requirements for joint IAMD operations
• Support development of Concepts of Operations (CONOPS) and Rules of Engagement (ROE) for joint/combined air and missile defense operations
• Provide strategic planning and C2 (Command and Control) integration expertise during conferences and exercise planning events
• Execute JOPP-based planning and development of operational guides, Concept Plans (CONPLANs), appendices, and campaign plans
• Build operational planning and country engagement budgets supporting Air Combat Command (ACC) and Combatant Command (COCOM)
• Develop Fiscal Year operational engagement proposals for ACC and COCOM
• Review current operations, plans, Air Force Instructions (AFIs), and joint publications to prepare briefings for ACC leadership
• Coordinate with service components, higher headquarters, and coalition partners to implement integrated defense plans
• Participate in all phases of regional IAMD exercises
• Collaborate with Higher Headquarters (HHQ), joint and coalition partners on exercise development, execution, and interoperability assessments
• Create and coordinate staff actions in the Task Management Tool (TMT)
• Create assessment plans to evaluate IAMD objectives, interoperability, and integration within the COCOM Area of Responsibility (AOR)
• Report findings and recommendations to the division chief
• Produce engagement situational reports, after-action reports, and conference summaries
• Input and analyze data in the Global Theater Security Cooperation Management Information System (G-TSCMIS)
• Organize and conduct meetings, conferences, briefings, and site surveys for operational planning
• Participate in COCOM and ACC exercises, planning conferences, and Video Teleconferences (VTCs)
• Deploy as required to support operational engagements, exercises, and planning conferences
• Conduct administrative tasks including event scheduling, space reservations, and travel coordination
• Manage APACS (Automated Planning and Control System), TDY (Temporary Duty) funding requests, flight/travel arrangements, and other required actions
• Coordinate all logistical requirements for exercises and planning events

Integrated Air & Missile Defense (IAMD) Planning Specialist – Mission Assurance

Business Analyst

• Lead the full Materiel Release process for Army Aviation systems, ensuring all documentation, requirements, and validations are completed accurately and on schedule.
• Coordinate across PMO, CPE, engineering, test, and sustainment teams to ensure readiness for type classification, safety releases, and fielding decisions.
• Analyze and manage logistics data to support system readiness, sustainment planning, and lifecycle management.
• Track and manage risk related to materiel release, safety, and sustainment, providing recommendations and mitigation strategies to leadership.
• Prepare and brief senior leaders on materiel release progress, logistics milestones, and program impacts.
• Support Army fielding activities, ensuring units receive the materiel, training, and documentation required to operate and sustain new systems.
• Serve as the logistics subject matter expert, advising program leadership on sustainment strategies, lifecycle cost impacts, and readiness drivers.
• Foster collaboration across government and contractor teams to keep logistics deliverables aligned with mission priorities.
• Tracks/monitors MRTS get well planning dates and conditions.
• Informs the Product Support Manager (PSM) of required get well extension request.
• Holds TC/MR Integrated Product Teams (IPT), prepares briefing materials, tracks meeting minutes, maintains action item tracker.
• Tracks unit compliance for MWO application.
• Coordinates MWO packages with the Life-Cycle Management Command MWO coordinator.
• Schedules MWO validation (VAL) and verification (VER) events with stakeholders, and Original Equipment Manufacture or Government Agency.
• Schedules equipment Users for VER activities through the appropriate Capability Manager and or CASCOM.
• Identifies contractual language and CDRLs for MWO requirements to include in the Statement of Work and or Performance Work Statements.

Materiel Release Specialist – Logistics Management Analyst 4

• support research and analysis efforts in support of a DOD customer.
• operate in a Joint and or DoD unique environment.
• execute both scheduled and unscheduled Assessment, Risk Management, and Due Diligence assessments across diverse plans, platforms, programs, and operational functions.
• support task areas while coordinating closely with engagement team management and client leadership on strategy, planning, execution, status, and review processes.
• adapt to a changing client environment while meeting client expectations.
• manage priorities and work effectively to initiate correspondence and task completion.
• support multiple efforts through flexible multi-task coordination.
• provide summary recommendations to team leadership regarding assigned work stream.
• apply fundamental industry knowledge and standards to support client reviews, improvements, and/or implementations.
• prepare presentations, briefings, and actively participate in client meetings and day-to-day interactions.
• communicate with team management through effective status reporting and demonstrate ownership and accountability for assigned task areas and work products.
• establish professional rapport with clients and other organizations.
• evaluate work products for technical accuracy, deliverable quality, and overall value to the client.
• attend relevant training, business seminars, and/or conferences to stay current with technical skills that align with client’s needs and changes in the industry.

Due Diligence Specialist – Mission Assurance 4

Architect

• Performs routine naval architecture work requiring application of standard techniques, procedures, and criteria in carrying out a sequence of design and/or analyses of ship hull, foundation, superstructure, arrangements and hull form characteristics tasks.
• As directed, applies selected techniques and procedures to assignments involving ship design and ship performance analyses.
• Assists in the solution of difficult problems involved in areas of assignment.
• Uses prescribed methods to perform specific and limited portions of broader systems design, performance analysis, or hull form characteristic assignments of more experienced naval architects.
• Provide engineering leadership and shipyard‑focused expertise across the design, construction, integration, and test phases of a Medium Unmanned Surface Vessel (MUSV) prototype program.
• Develop and/or review structural, weight, stability, hydrodynamic, maneuvering and seakeeping characteristics to ensure MUSV designs meet threshold performance requirements.
• Understanding of American Bureau of Shipping (ABS) standards and/or Navy Ship Design standards and/or USCG Rules. Applying rulesets to autonomous vessels.
• Translate MUSV SOW requirements into engineering products including specifications, interface documentation, design drawing reviews, and configuration baselines.
• Provide engineering oversight during shipyard construction or conversion activities—monitor progress, verify construction quality, and ensure alignment with approved design standards.
• Collaborate closely with autonomy, C2, electrical, and mechanical systems teams to ensure vessel design supports integrated unmanned operation requirements.
• Support development of test vessel descriptions, test plans, and engineering procedures required for MUSV prototype demonstrations.
• Participate in major milestone events including Post‑Award Conference, pre‑test inspections, and government witness events as required by the MUSV test plan.
• Support risk identification and mitigation related to design maturity, manufacturability, and shipyard workflow.
• Travel to shipyards, subcontractor facilities, government test sites, and partner locations as needed.

Naval Architect 3

• Supports electromagnetic warfare (EW) systems across integration events
• Provides training and technical support for users
• Operates systems in the field and troubleshoots complex RF issues
• Ensures fleets are mission-ready
• Acts as a forward technical face to the customer
• Conducts technical analysis of product implementations and modifications
• Recommends technical solutions and actions for product success
• Assesses product needs according to specifications
• Delivers technical training to customers and stakeholders