BLUE ORIGIN

Mechanical Engineer

• Electrical design of analog instrumentation measurement circuits that measure various environmental and combustion conditions of a rocket engine.
• Electrical design of actuator circuits for solenoids, or electromechanical servo systems.
• Interpret systems engineering and quality requirements as they apply to electrical product development.
• Develop circuits, boards, and rugged electronic hardware assemblies across the entire product life-cycle; including concept and requirements definition, design, prototyping, verification (power-on, functional / acceptance / qualification testing) and release to production.
• Support risk analyses, failure modes effects and criticality analyses (FMECA), design for test/manufacture/cost (DFx), and root-cause analysis of test discrepancies.
• Manage design schedules of avionics subsystem.
• Routinely present program status and issues.
• Identify root cause failure modes using fault tree and fishbone methodologies.

Senior Electrical Design Engineer

• Electrical design of analog instrumentation measurement circuits that measure various environmental and combustion conditions of a rocket engine
• Electrical design of actuator circuits for solenoids, or electromechanical servo systems
• Interpret systems engineering and quality requirements as they apply to electrical product development
• Develop circuits, boards, and rugged electronic hardware assemblies across the entire product life-cycle; including concept and requirements definition, design, prototyping, verification (power-on, functional / acceptance / qualification testing) and release to production
• Support risk analyses, failure modes effects and criticality analyses (FMECA), design for test/manufacture/cost (DFx), and root-cause analysis of test discrepancies
• Manage design schedules of avionics subsystem
• Routinely present program status and issues
• Identify root cause failure modes using fault tree and fishbone methodologies

Electrical Design Engineer II

Systems Engineer

• Implement product definition, design, procurement, and production of environmental control and vent fluid subsystems and components
• Conduct fluid and structural analyses to characterize component and system behavior
• Coordinate with cross-functional stakeholders to ensure your systems work together and meet requirements, resolving issues with calculated risk
• Drive design for manufacturability. Implement upgrades for flight hardware identified through root cause analysis, manufacturing, testing, flight, and cost reduction opportunities
• Build and manage project plans including cost, schedule and risk management to ensure timely delivery
• Oversee component and system level testing, verification, and data analysis as part of development, qualification and hardware acceptance

Fluid System Engineer II

Civil Engineer

• Design and analysis of primary and secondary structures, including composites and metallic piece parts, as well as integrated structural assemblies
• Coordinate with other subsystem teams on the design of structural interfaces
• Provide on-site manufacturing and production support, including travel when needed
• Ensure production quality and disposition hardware nonconformances as they arise
• Support configuration development and trade studies
• Perform analysis reviews for designers and junior structural analysts in stress/stability/fracture analysis and standard processes
• Work with multi-functional teams that are responsible for selecting materials, manufacturing processes, and suppliers to produce world-class aerospace hardware
• Develop and improve enterprise analysis capabilities such as crafting process automation tools for model creation, strength checks, and analysis report generation
• Maintain and report on activity schedule, budget and technical status
• Provide mentorship and guidance to junior engineers
• Find opportunities for improvements and operational cost savings

Senior Structural Engineer

DevOps Engineer

• Lead in architectural discussions to advocate for scalable and secure DevOps practices.
• Design and implement monitoring solutions to proactively identify issues, ensuring system reliability and performance.
• Lead initiatives to enhance automation, improve deployment frequency, and reduce manual interventions.
• Conduct regular audits of CI/CD pipelines to ensure compliance with industry standards and best practices.
• Develop and maintain dashboards and reports to provide insights into system performance and team productivity.
• Engage in code reviews, pair programming, and technical workshops to foster a culture of learning and innovation.
• Collaborate with developers and program managers to design and develop CI/CD pipelines for avionics software deployed to development hardware, simulated environments, and hardware-in-the-loop systems.
• Train, guide, and mentor team members on CI/CD best practices.
• Set direction and goals for the team regarding project impact, product quality, and engineering efficiency.
• Collect and analyze data to understand and troubleshoot pipeline performance.
• Understand the safety-critical software development process and create tools to enhance its efficiency and effectiveness.

Senior DevOps Engineer

Electrical Engineer

• Capture and translate engineering requirements and customer specifications for power electronic systems for space applications.
• Perform conceptual design, including selection of power-stage topology and control schemes suitable for challenging aerospace environments.
• Execute detailed design, selecting reliable and space-qualified components to meet demanding performance and environmental criteria.
• Develop and implement controller algorithms to optimize converter performance and efficiency.
• Conduct feasibility studies and verify designs through detailed circuit simulation and analysis.
• Produce accurate and clear schematic drawings for power electronic circuits.
• Design PCB layouts and perform routing to meet space application standards, including reliability and manufacturability.
• Lead board bring-up, troubleshooting, and functional testing of prototypes and production units.
• Perform iterative design improvements based on test data and feedback, ensuring readiness for production.
• Collaborate with cross-functional teams, including firmware, mechanical, and systems engineering, to ensure cohesive product development.
• Support documentation, design reviews, and production transition activities.

Power Electronics Engineer

Project Manager

• Work with team leadership and support the development of robust plans of product deliveries and lead tracking of key operating metrics - including technical progress, cost, and schedule.
• Identify and define problem statements and have enough experience to build and support a realistic project schedule.
• Understand critical path and variance drivers and work to reconcile.
• Support management of budget across all control points including driving estimate to complete assessments.
• Coordinate the efforts across the product team comprised of engineering, program planning & control, supply chain, manufacturing/production engineering, facilities, production, tooling, quality, and test.
• Support purchase orders, contracts, and service level work agreements aligned with program resources.
• Understand and drive linkage between Material Requirements Planning system and IMS.
• Support planning of technical efforts via agile concepts leveraging company tools.
• Enable and maintain regular business rhythm, action tracking, and consolidate information for effective decision making, including maintaining and routinely reporting performance to plan on schedule, resources, program/product cost, and technical performance metrics for program reviews.
• Support management of wiki space that enables team to have efficient reference to key information.

Senior Project Manager

• Define and decompose system-level requirements into actionable specifications within the Thermal subsystem domain.
• Develop and maintain interface control documents (ICDs) to ensure subsystem compatibility and integration fidelity.
• Conduct system analysis and trade studies to optimize thermal subsystem performance, reliability, and cost across mission profiles.
• Drive verification and validation planning, including environmental testing, functional checks, and mission simulations.
• Lead passive hardware design reviews (SRR, PDR, CDR) and ensure technical artifacts meet quality and compliance standards.
• Support integration, test, and launch operations, including anomaly resolution and post-launch analysis.
• Support schedule management of subsystem systems engineering efforts and products, team coordination, and support make vs buy decisions, hardware procurement, and vendor management.
• Mentor junior engineers and foster a culture of technical excellence and cross-functional collaboration.
• Ownership of passive thermal artifacts such as the master equipment list, power equipment list, safety products and other documents.
• Ensuring alignment and synchronization of thermal subsystem analysis data with interfacing subsystems such as Electrical Power, Liquids, Gas and GNC.
• Reviewing system level CONOPS information and distilling into useable datasets for consumption by the thermal analysis and passive thermal hardware teams.
• Verifying compliance of designs against documented hardware temperature limits.

Senior Thermal Systems Engineer

Full-stack Engineer

• Drives the development of thermal systems including system architecture definition, thermal system modeling, component sizing, and design.
• Perform trade studies relating to selection of material and subsystem hardware.
• Perform hand calculations to screen concepts without detailed modeling and to sanity check finite element /difference model results.
• Develop vehicle-level thermal models using SINDA/FLUINT with Thermal Desktop.
• Develop and maintain system analysis documentation.
• Perform steady state & transient thermal analysis of spacecraft thermal systems as well as tracking of system performance in ground ops, TVAC testing, launch, Earth orbit, and beyond Earth orbit environments.
• Provide thermal engineering leadership & support for the development of thermal vacuum (TVAC) test procedures, scripts and installation designs.
• Provide thermal engineering leadership & support for thermal hardware design, documentation (drawings and model based designs), procurement, planning, procedural & operations support of Spacecraft assembly, integration & test (AI&T) efforts.

Spacecraft Thermal Engineering Lead – Lunar Permanence

• Design, analysis, development, and testing of primary and secondary structures, including composites and metallic piece parts, as well as integrated structural assemblies.
• Create 3D models, detail part drawings, assemblies, installations, and interface control documents.
• Provide manufacturing and production support for your hardware.
• Provide technical guidance for integration.
• Support configuration development and trade studies.
• Apply practical approaches to hardware fabrication and cost impacts.
• Create test plans, specifications, and other documentation for the development of flight hardware.
• Work with vertically-integrated teams that are responsible for materials, manufacturing processes, to produce world-class aerospace hardware.
• Participate in subsystem test planning, execution, data reduction and analysis.
• Plan, coordinate, conduct tests, and review test data.
• Participate in the development and purchase of new equipment and tooling.
• Maintain and report on activity schedule, budget and technical status.

Structures Design Engineer II – Lunar Permanence

• Lead the design, development, analysis and testing of fluid systems for rockets
• Engage in all levels of the design cycle including conceptual design, requirements definition, thermo-fluid modeling, structural layout and analysis, integration, test and mission support
• Use creative thinking and novel manufacturing solutions to solve complex problems with high pressure, cryogenic, and highly stressed hardware
• Author component specifications and manage suppliers through design, development, qualification and delivery of flight hardware
• Work closely with other groups to ensure your systems work together, resolving issues with calculated risk
• Lead and participate in component and system level testing and data analysis

Fluid Systems Design Engineer II – Upper Stage 9x4 Next Gen New Glenn

Technical Product Manager

• Develop and articulate a clear software product vision and strategy that aligns with both customer needs and Blue Origin’s mission.
• Apply domain expertise in manufacturing and engineering configuration management to develop strong empathy with internal customers, and represent their voice throughout the product lifecycle.
• Own the software roadmap, making data-driven decisions to prioritize features and enhancements based on customer needs, business impact, and technical feasibility.
• Deliver high-quality products on time and within budget, using AI to quickly prototype and ship features.
• Lead cross-functional teams to ensure successful product development and launch.
• Define, monitor, and report on key metrics to measure product success and leverage data to make informed decisions and iterate on product features and functionality.
• Drive continuous improvement initiatives by evaluating product processes, tools, and methodologies.

Senior Technical Product Manager

Engineer

• Serve as a technical leader responsible for the design, integration, and production readiness of all internal harnessing and packaging within the TeraWave flight product.
• Apply expertise to mature designs, ensuring they are robust for the space environment and optimized for efficient, large-scale, automated manufacturing.
• Proactively embed DFM/DFA principles into all design cycles for internal harnesses, enclosures, PCB/PCBA’s, and electronic assemblies.
• Own and lead the technical effort to transition complex product-internal harnessing and packaging designs from low-rate initial builds to a high-rate production environment.
• Collaborate with manufacturing engineers and suppliers to develop and validate production processes, tooling, and test procedures to achieve required production rates and quality.
• Design and release detailed 3D models and 2D drawings for internal wire harnesses, cable assemblies, and electronics enclosures using Altium, Creo, SolidWorks, and Windchill.
• Oversee and contribute to structural, thermal, and vibration analysis of electronic packaging and develop verification and validation test campaigns (qualification, acceptance, etc.).
• Mentor junior engineers, sharing best practices in design for manufacturing, product internal harness design, and product maturation.

Senior Internal Harnessing and Packaging Engineer – BNS Core Components

• Own significant components of the end-to-end design of advanced phased array antennas, from radiating element to the full array, for microwave and millimeter-wave applications (X, Ku, Ka-bands)
• Define system-level RF architectures, including leading trades between analog, digital, and hybrid beamforming approaches to meet platform constraints (SWaP, thermal, etc.)
• Guide and perform critical electromagnetic (EM) simulations using tools like HFSS, CST, and TICRA to optimize array performance, scan volume, and impedance matching
• Collaborate closely with RFIC/MMIC, T/R module, DSP, mechanical, and thermal engineers to define requirements and ensure a cohesive system design
• Oversee the entire hardware lifecycle, guiding the fabrication, characterization, and environmental qualification (e.g., thermal-vac, vibration, radiation) of antenna systems
• Mentor other engineers and drive technical excellence through rigorous design reviews and data analysis

Principal Phased Array Antenna Engineer

Administration

• Contracting team lead for U.S. Government and commercial contracting proposal preparation, tracking and transmittal of deliverables.
• Draft and receive customer correspondence through the development of standardized templates and responses.
• Provide contractual guidance on government and commercial contracting issues and ensure requirements are communicated and understood throughout the organization.
• Initiate communications with cross-functional counterparts to track data deliverables, monitor contractual obligations, and prepare documentation.
• Provide guidance on adherence to internal policies, procedures, and tools relating to customer contract administration.
• Standardize processes and use automation when practical and appropriate.
• Mentor and coach junior contract administrators who will assist you on New Glenn.
• Occasional travel for meeting support may be required.