AECOM

Electrical Engineer

• Design and implement electrical systems for hyper-scale data centers, including medium and low-voltage power distribution, backup power systems, and emergency systems
• Develop and maintain electrical schematics, bills of materials, and installation drawings
• Ensure compliance with industry standards, codes, and regulations, including National Electric Code (NEC) and International Electrotechnical Commission (IEC) standards
• Collaborate with other engineers and stakeholders to develop specifications, design criteria, and project budgets
• Analyze electrical systems to identify and resolve issues, including load balancing, capacity planning, and power consumption optimization
• Monitor and maintain the electrical systems, including performing preventative maintenance, testing, and repairs
• Develop and implement electrical safety procedures and training programs for technicians and other staff
• Stay up-to-date with advancements in electrical engineering and data center technologies, and recommend new technologies to improve the reliability and efficiency of our data center infrastructure
• Is accountable for project success in the electrical discipline.
• Provides specialized technical input to supporting staff, acting as a mentor and leader for mid-level engineers
• Approves and signs off on work, acting as Engineer of Record
• Provides estimates for the engineering budget and schedule a to meet requirements on large, complex projects
• Leads technical client relationships and plays a major role in selling

Electrical Engineer, Technical Lead – Data Centers

Designer

• Developing and designing Heat Rejection and HVAC systems specifically tailored for data centers.
• Selecting appropriate air/water side cooling systems for data centers.
• Conducting internal CFD simulations to optimize airflow distribution.
• Designing HVAC systems with redundancy and fault-tolerant features.
• Performing heat load calculations for data centers.
• Implementing energy-efficient HVAC design strategies.
• Ensuring the data center's air quality is maintained at optimal levels.
• Collaborating with electrical engineers and mechanical engineers to integrate systems seamlessly.

Mechanical Designer, Data Centers

Mechanical Engineer

• Provide leadership and management for the U.S. Data Center Mechanical Engineering team, supporting project delivery across multiple hyperscale data center programs.
• Establish technical standards, best practices, and quality expectations for mechanical design across the data center portfolio.
• Support project teams as a senior technical resource on complex hyperscale data center projects, providing guidance on system architecture, design decisions, and client requirements.
• Provide technical oversight of mechanical system design, including HVAC systems, hydronic piping systems, and fire suppression systems, ensuring alignment with client standards and operational performance requirements.
• Oversee coordination of mechanical engineering work with other disciplines, including electrical, structural, and architectural teams, to ensure integrated and constructible design solutions.
• Support resource planning, staffing strategies, and workload balancing across the mechanical team to meet project schedules and client commitments.
• Mentor and develop engineers within the department, supporting technical growth, professional development, and knowledge sharing.
• Ensure mechanical designs comply with applicable industry codes, standards, and best practices relevant to hyperscale data center infrastructure.
• Stay current on emerging technologies, industry trends, and evolving codes related to mechanical systems in data centers.
• Provide technical oversight and support during construction phases when needed, assisting teams with RFIs, design clarifications, and complex field issues.
• Participate in key client meetings and strategic discussions as a senior technical representative for mechanical engineering.
• Evaluate and promote new technologies and engineering approaches that improve performance, reliability, and energy efficiency of data center mechanical systems.
• Support continuous improvement of engineering processes, documentation standards, and design workflows across the data center practice.

Mechanical Engineering Director – Data Centers

Full-stack Engineer

• Provide expert technical input on blast and protection engineering.
• Lead the design of blast protection provisions, including CFD modelling of effects on building structures and complex structural analysis.
• Oversee the production and workload management for blast-related projects.
• Develop work plans, define tasks, and ensure quality management and technical assurance.
• Work closely with clients to understand their business practices and goals, identify challenges, and formulate effective solutions.
• Engage with sector leads within our Building & Places Business unit and liaise with general Building Engineering teams.
• Contribute to business development initiatives, including sales and work winning.
• Undertake detailed assessments of threats, likelihood, and consequences to determine risk severity and appropriate treatments.
• Produce high-quality documentation, including employer’s requirements, specifications, feasibility studies, and concept/scheme designs.
• Manage projects on behalf of clients, including progress reporting and contract administration where applicable.
• Promote best practices in Safety, Health & Environment (SH&E) and contribute to knowledge management within the team.

Blast Technical Lead

• Provide expert technical input on blast and protection engineering
• Lead the design of blast protection provisions, including CFD modelling of effects on building structures and complex structural analysis
• Oversee the production and workload management for blast-related projects
• Develop work plans, define tasks, and ensure quality management and technical assurance
• Work closely with clients to understand their business practices and goals, identify challenges, and formulate effective solutions
• Engage with sector leads within our Building & Places Business unit and liaise with general Building Engineering teams
• Contribute to business development initiatives, including sales and work winning
• Undertake detailed assessments of threats, likelihood, and consequences to determine risk severity and appropriate treatments
• Produce high-quality documentation, including employer’s requirements, specifications, feasibility studies, and concept/scheme designs
• Manage projects on behalf of clients, including progress reporting and contract administration where applicable
• Promote best practices in Safety, Health & Environment (SH&E) and contribute to knowledge management within the team

Technical Lead

Manager

• Lead and manage the delivery and oversight of rail infrastructure components, including trackwork, guideway, civil structures, drainage, and related assets
• Oversee construction activities to ensure compliance with technical requirements, contract specifications, safety standards, and program goals
• Monitor construction progress, schedules, cost controls, and risk mitigation strategies to ensure timely and on-budget project delivery
• Coordinate infrastructure interfaces with rail systems disciplines such as overhead catenary system, train control, traction power, communications, and system integration
• Review and evaluate technical submittals, engineering documents, construction plans, and contractor deliverables for quality and compliance
• Identify and resolve technical, logistical, and contractual issues impacting infrastructure delivery
• Support procurement, contract administration, and change management processes related to infrastructure scope
• Ensure consistent application of systems engineering principles and project management best practices across infrastructure activities
• Collaborate with multidisciplinary teams including environmental, right-of-way, utilities, safety, and regulatory stakeholders
• Provide leadership in construction oversight, field coordination, and stakeholder engagement
• Prepare executive reports, briefings, and performance updates for senior management
• Support strategic planning initiatives and continuous improvement efforts related to rail infrastructure delivery.

Rail Infrastructure Manager

Capture Manager

• Win major pursuits as the consultative sales process leader, contributing strategy, business development best practices and sales leadership to create competition beating win strategies.
• Direct discovery, pre-positioning, differentiation, and delivery strategies for major transformative programs with current/prospective clients and internal partners.
• Analyze competitive landscapes, leveraging insights from recent wins and losses to refine strategies.
• Promote a collaborative approach, leveraging multidisciplinary teams from across the region and globe to deliver value-driven, client-focused outcomes.
• Ensure partnership between technical, marketing and bidding staff for proposal best practices.
• Champion the complete lifecycle of the sales process, ensuring quality assurance and adherence to Go/No-Go rigor.
• Coordinate with marketing to execute strategic campaigns aligned with key opportunities.
• Ensure compliance with commercial, financial, legal, and governance elements of contracts.
• Drive accountability for delivering sales metrics and achieving high capture rates.
• Align AECOM’s initiatives with client priorities, focusing on sustainability, resilience, and cutting-edge solutions.
• Help to build and maintain a diversified pipeline of qualified opportunities, ensuring alignment with business strategy and goals.
• Build trust with client decision-makers and internal stakeholders, including Client Account Managers (CAMs), Marketing, Bidding, RBLLs, and the Executive Board.

Capture Management Director

Civil Engineer

• Interpretation of geotechnical data and development of loads
• Ground-structure interaction modeling and analysis of earth retention systems, ground support systems and underground structures
• Selection and design of earth retention systems (steel, wood, concrete), ground support systems and underground structures using manual calculation and software
• Drawing preparation of earth retention systems, ground support systems and underground structures, including detailing of primary and secondary structural members, concrete reinforcement, steel and concrete connections (e.g. weld design), and ground anchors

Tunnel Geo-structural Engineer

Project Manager

• Oversee validation of products and materials ordered for projects to verify the accordance to the specifications.
• Monitor and assess construction performance while recording construction activities to ensure compliance with construction documentation requirements.
• Manage inspection work in progress to assure that methods, materials, and equipment conform to approved standards.
• Manage project Document Control including review of Construction Inspectors' daily status reports and construction progress schedules.
• Additionally, ensure utilization of shop drawing submittals process and incorporation of RFI's; conduct review of contractor change orders and make recommendations for changes and ultimately, incorporate change orders into project record.
• Coordinate with the General Contractor and ensure Scheduling of all tests and inspections required by the Contract Documents or governmental authorities and arrange for the delivery of test and inspection reports to the OWNER and Architect.
• Review punch list submitted by others and verify that items on the punch list have been completed and corrected prior to recommending substantial completion to the Owner.
• Monitor construction work progress, process field construction documentation (RFI and submittal validation and logging), also provide engineering support and coordination of construction field activities with MEP and CSA inspectors.
• Coordinate with the general contractor on required meetings and attend all site-based meetings.
• Coordinate project documentation with Project Controls (cost and schedule) reviewers.
• Lead Change Management Process.
• Review and document condition of any off-site stored materials including gathering all the necessary insurances and bill of sales for Owner supporting pay application review and approval on behalf of the Owner.
• Participate in Technical evaluations for A/E, GC and vendor selection.
• Feasibility & constructability reviews of design submittals.
• Obtaining all required District of Columbia project permits.
• CPM Project Schedule review and critical path enforcement and understand project scheduled activities.
• Shop drawing and construction submittal review.
• Cost tracking and manage the Project budget.
• Change Management including settlement and negotiation.
• Construction Closeout.
• Attend all site-based Stakeholder meetings.
• Onsite at project site daily.

Senior Construction Project Manager

Architect

• Support architectural design for large scale hyperscale cloud data center and colocation projects, from early concept through construction administration and closeout.
• Collaborate with internal engineering disciplines, construction teams, and external stakeholders to develop fully coordinated and integrated design solutions.
• Develop and review drawings, specifications, and technical documentation, ensuring compliance with codes, standards, and client design guidelines.
• Assist in coordination with consultants, contractors, and permitting authorities to support project delivery and regulatory compliance.
• Serve as an architectural subject matter expert for hyperscale and colocation clients, ensuring operational efficiency, scalability, and reliability in facility design.
• Maintain and apply knowledge of industry best practices and data center design trends.
• Assist with business development, proposal writing, and conceptual architectural designs for new pursuits.

Senior Architectural Designer, Data Centers

• Oversee a talented team of engineers and designers working on renewable projects across the country for the US Energy Practice
• Provide mentorship to other engineers within the US Energy Practice and other remote teams
• Lead improvements in project efficiencies by creating, updating, and implementing group specific standards/templates
• Provide input to management on project resourcing and staff forecasting needs
• Develop task and deliverable list with associated hours estimate and schedule to support business development activities as it relates to renewable and decentralized energy projects
• Support the department’s strategic resourcing initiatives and actively support recruiting efforts
• Lead by example in engineering execution functioning as technical lead and engineer of record on project
• Perform engineering calculations to support and direct construction deliverables (specifications, reports, drawings)
• Support projects through complete life cycle including the feasibility phase, preliminary and detailed design, issue-for-bid, construction, start-up, and commissioning
• Monitor your team’s project progress to ensure quality, on-time and on-budget delivery of projects
• Participating in and presenting engineering work at client meetings including those requiring occasional travel
• Work with Project Managers on developing design schedules and budgets for engineering work activities
• Provide quality control reviews of work developed by others
• Ensure that the technical and safety standards are maintained in all aspects of the design work

Renewable Energy Technical Lead

Engineer

• Support CEI activities including construction oversight, field inspections, documentation, and reporting
• Assist with reviewing plans, specifications, estimates, and contractor submittals
• Monitor construction progress and quality of work
• Prepare daily field reports and maintain project documentation
• Coordinate with contractors, designers, and clients

Construction Management Project Engineer

Program Manager

• Provide program-level leadership across multiple concurrent data center design projects
• Monitor program performance including schedule, budget, staffing, and risk
• Identify and resolve program-level constraints impacting delivery
• Ensure consistency of execution across multiple projects and clients
• Support Design Managers and Project Managers in maintaining successful delivery
• Support business development and proposal writing for new pursuits.
• Lead preparation of major technical and commercial proposals, including: Go / No-Go coordination, Proposal schedules and deliverable management, Fee strategy coordination, Staffing plans and resource alignment, Executive review coordination, Interview preparation and coaching
• Coordinate closely with Client Account Managers, and Technical Leaders
• Improve proposal processes, templates, and win strategies
• Support capture planning for strategic pursuits
• Serve as a key point of contact for strategic clients
• Participate in client meetings, presentations, and program reviews
• Support Client Account Managers in maintaining strong client relationships
• Help identify new opportunities within existing client programs
• Assist in managing client expectations and overall client experience
• Travel as needed for project-related activities such as client meetings and site visits.

Program Manager, Facility Design, Data Centers

Security Engineer

• Design, configure, and deploy routed and switched network infrastructures across enterprise and OT environments.
• Architect and implement secure network segmentation, firewall policies, VPN configurations, and access control strategies.
• Configure network devices from baseline builds, including VLANs, QoS, STP, routing protocols, and high-availability configurations.
• Support sales engineering efforts by developing technical solutions and participating in client presentations.
• Conduct network and security assessments, identify vulnerabilities, and provide documented remediation recommendations.
• Install and commission physical network infrastructure, including rack-mounted equipment and fiber/copper connectivity.
• Support implementation of wireless solutions, including enterprise-grade WiFi systems.
• Develop and maintain detailed network diagrams, configuration documentation, and test plans.
• Provide in-person and remote troubleshooting and operational support.
• Travel to client sites within the United States as required (typically 1–2 trips per month).

Network Technology and Security Consultant

• AECOM is seeking a Senior Mechanical Engineer with experience on Hyperscale Data Center projects to act as Data Center Mechanical Engineer Lead.
• The job incumbent will be responsible for designing and overseeing the construction of mechanical systems for hyperscale data centers, including HVAC, piping and fire suppression systems.
• The Mechanical Engineer will play a critical role in ensuring the reliability, efficiency, and safety of our data center infrastructure.
• Act as the primary point of contact for clients, responding to their inquiries and concerns in a timely and professional manner.
• Develop and maintain strong relationships with clients, regularly communicating with them to understand their needs and expectations.
• Coordinating with multiple disciplines and acting as lead mechanical engineer to ensure that projects are delivered within budget and on schedule while managing the mechanical team including HVAC, fire protection, plumbing.
• Develop detailed specifications for mechanical equipment, including pumps, fans, and air handling units.
• Writing reports for internal and external purposes based on findings.
• Analyze and evaluate mechanical system performance, identifying areas for improvement and making recommendations for upgrades.
• Collaborate with cross-functional teams, including electrical and mechanical engineers, to ensure seamless integration of the chiller systems with other data center infrastructure.