Mechanical Engineer

• Design, analysis, development, and testing of primary and secondary structures, including composites and metallic piece parts, as well as integrated structural assemblies.
• Create 3D models, detail part drawings, assemblies, installations, and interface control documents.
• Provide manufacturing and production support for your hardware.
• Provide technical guidance for integration.
• Support configuration development and trade studies.
• Apply practical approaches to hardware fabrication and cost impacts.
• Create test plans, specifications, and other documentation for the development of flight hardware.
• Work with vertically-integrated teams that are responsible for materials, manufacturing processes, to produce world-class aerospace hardware.
• Participate in subsystem test planning, execution, data reduction and analysis.
• Plan, coordinate, conduct tests, and review test data.
• Participate in the development and purchase of new equipment and tooling.
• Maintain and report on activity schedule, budget and technical status.

Structures Design Engineer II – Lunar Permanence

• Support design development for projects related to utility and process piping infrastructure, including equipment/materials specification, calculations, data sheets, design and drawing development
• Design projects involving piping and utility design using either Plant 3D, PDS, or similar three dimensional design tools
• Assist with mechanical design of waterfront facilities such as marinas, container terminals, marine oil terminals, and pump stations (sewer and storm water)
• Assist with condition assessment inspections for oil & gas and utility infrastructure
• Perform 3D modelling and analysis of mechanical systems
• Conduct 3D model reviews, clash checks and interdisciplinary reviews of developed drawing packages
• Participate in and conduct quality control reviews of deliverables
• Other duties: Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Mechanical Engineer – Entry Level

• Provide pre-order engineering support, including preliminary drawings, communication diagrams, sequences of operation, and bills of materials.
• Collaborate with design engineering, mechanical, and production teams to develop innovative solutions for unique applications.
• Review customer plans, specifications, and scope of work to ensure alignment with product offerings and completeness before hand-off to design engineering.
• Offer technical input to product development teams regarding new products or enhancements to existing ones.
• Assist in building a library of standard design details, tools, and CAD resources for repeatable applications.
• Deliver technical training on IEM products and applications to internal teams and clients.
• Ensure compliance with applicable codes and standards (NEC, UL, IEEE) during product and order evaluations.
• Provide ongoing technical consultation to internal sales and engineering teams.

Applications Design Engineer

• Design and support Mission Critical HVAC and mechanical systems for data centers, including air-cooled and liquid-cooled cooling systems, chilled water plants, cooling towers, CRAC/CRAH units, and associated distribution systems.
• Experience utilizing CFD modeling software, such as 6Sigma, to model and analyze airflow distribution, thermal performance, cooling effectiveness, and evaluation of multiple design scenarios in air-cooled and liquid-cooled data center projects.
• Perform cooling load calculations, equipment sizing, airflow analysis, and mechanical system modeling to support high-density IT environments and critical infrastructure.
• Collaborate with multidisciplinary engineering teams to evaluate and present HVAC system alternatives, redundancy strategies, and cooling solutions to clients and project stakeholders.
• Perform technical and QA/QC reviews to ensure the delivery of code-compliant, and high-quality engineering deliverables.
• Develop and modify models, plans, details, and drawings of mechanical and plumbing engineering systems and components according to applicable standards and modeling techniques.
• Effectively communicate and present HVAC and plumbing design concepts, system alternatives, and engineering solutions during multidisciplinary design reviews and project coordination meetings.
• Motivate and inspire team members.
• Conduct training sessions for internal employees when necessary.

Mechanical Engineer – Mission Critical Data Centers

• Supports the development and operations of New Glenn, a heavy-lift orbital launch vehicle
• Lead the overall physical integration and packaging of structural, mechanical, fluids, and avionics subsystems
• Create and manage interface definitions between vehicle subsystems and potential payloads
• Coordinate regular configuration reviews to address interfaces, subsystem functionality, assembly and operations
• Communicate and collaborate with all development teams involved on projects

Systems Design Engineer II

• Creating ground system architectures for the New Glenn Launch System including future variants
• Create, release and maintain Interface Control Drawings and Models
• Interface with all flight and ground elements to ensure a complete, balanced New Glenn system

Ground System Design Engineer III

• Design Reactor Modification Tooling that incorporates mechanical, pneumatic, hydraulic, and electro-mechanical/motor actuation based on inputs, requirements, and environment within schedule and cost limits
• Draft drawings for fabrication, then build and test the Reactor Modification Tooling you design to prove the requirements for performance are met
• Prepare 3D models, access and clearance studies, drawings, specifications, and test plans to support tooling development
• Collaborate with the Hardware Team, Analysis Teams, Field Deployment Teams, and Services Business to deliver tooling designs that meet our standards for Nuclear Quality and Safety
• Perform design reviews to present your design to engineering peers and leadership and obtain feedback
• Write operation procedures for the tooling you design to help the field deployment team execute the repair
• Emergent issue support of customers during Outage Season to help solve challenging problems with technical guidance and fast-paced design, build, test response

Lead Engineer – Tooling Design Engineer

Senior Engineer – Tooling Design Engineer

• Contribute and support HVAC, Plumbing, Fire Protection, Process, and Utility Engineering efforts
• Execute engineering and design duties as required to ensure quality products
• Lead and mentor the team to expand their capabilities
• Collaborate in a team environment and communicate effectively
• Direct and mentor subordinate staff about their responsibilities

Mechanical Engineer, Remote

• Investigate and evaluate the root cause of failures and damage to HVAC and MEP systems
• Assess building management systems, automation systems, fire protection, and fire alarm systems
• Work independently and with a cross-functional team of experts

Forensic Mechanical Engineer

• Design, refine and ship reusable and accessible components, tokens, and interaction patterns that enable teams to build consistent, high-quality experiences across web and mobile
• Contribute code to production and support Product Designers contributing code to production using agentic coding tools (Claude Code, custom internal tools)
• Establish LLM guidelines that align with the design system, enabling engineers and designers to quickly generate and implement designs and prototypes aligned with the design system
• Create internal guides and configure/create internal tooling to help Product Designers of varying technical levels adopt generative AI tooling in our daily workflows, making it possible for us to more directly improve and evolve the user-facing experience
• Define and maintain Niche’s visual language, guideline documentation and component libraries, including typography, color, iconography, and UI patterns, for both people and AI agents (think Stitch’s Design.md)
• Improve the contribution model so teams can effectively propose, build, and scale new components from real product use cases
• Track the latest tools and resources, stay aware of what's available and recommending tools to adopt while being mindful of hype cycles
• Clearly and honestly call out risks with reliance on AI tooling, strike a balance between short-term wins and long-term investments, and help advise on what people do best vs where agents can help.

Staff Design Systems Engineer

• Responsible for signing and sealing engineering documents
• Analyzes, develops and evaluates systems
• Improves and maintains current systems or creates brand new projects
• Designs and drafts blueprints, visits systems in the field and manages projects
• Applies engineering techniques and analyses within the scope of the assignment
• Performs work with a high degree of latitude
• Handles the most complex issues
• Provides leadership, coaching, and/or mentoring to a subordinate group
• May act as a lead or first-level supervisor
• Direct interaction with clients

Mechanical Engineer – PE III

• Contribute to the overall physical integration and packaging of the structural, mechanical, fluids and avionics subsystems within the integrated vehicle
• Create and manage interface definitions between subsystems with appropriate control documents.
• Continually assess design for integrated manufacturing, assembly, test and operations and drive design to optimize for manufacturability, quality, and cost.
• Support development of system requirements, flow down, and verification planning.
• Lead inter-module development priorities and expectations as resolution of integration issues between lead engineers and their respective teams.
• Coordinate the cross-functional change management process, facilitating design reviews and ensuring communication between all groups affected by the change.
• Management of the Vehicle CAD models.
• Ensure the team adheres to the configuration management best practices as well as Blue Origin configuration management standards.

Senior Systems Engineer, Configuration – CAD Design

• Lead a team of mechanical engineers responsible for the detailed design of handheld powered devices, including precision assemblies and mechanisms, gear‑based transmission systems, instruments and attachments.
• Define and review mechanical design concepts, trade studies, and architecture decisions to balance performance, reliability, manufacturability, cost, and serviceability.
• Design for Reliability (DfR) practices, including durability analysis, fatigue assessment, wear modeling, and lifetime testing strategies.
• Design for Manufacturability and Assembly (DfM/DfA) efforts to ensure scalable, repeatable, and cost‑effective production.
• Own and drive mechanical system requirements, ensuring alignment with system‑level requirements, user needs, performance targets, and regulatory constraints.
• Identify critical paths during product development, address bottlenecks and risks and facilitate problem solving across R&D teams.
• Partner with manufacturing engineering to optimize component sourcing, assembly processes, tolerances, and inspection methods.
• Ensure robust design margin and implementation of lessons learned from field data, validation testing, and post‑market feedback.
• Oversee and guide tolerance stack‑up analysis, ensuring precision requirements are met for functional performance.
• Lead and review thermal analysis, including heat generation, dissipation, thermal deformation, and impact on mechanical performance and reliability.
• Ensure appropriate use of analytical and simulation tools (FEA, thermal, kinematic modeling) to support design decisions and risk mitigation.
• Maintain mechanical design documentation, calculations, and analysis outputs suitable for design reviews, audits, and regulatory submissions.
• Collaborate closely with electrical, system, and software teams to ensure seamless mechanical‑electrical‑firmware integration.
• Support verification and validation (V&V) activities by ensuring mechanical requirements are testable, traceable, and validated through appropriate methods.
• Participate in and contribute to risk management activities, including DFMEA and system‑level hazard analysis.
• Ensure mechanical risk controls are correctly implemented, verified, and validated.
• Review test results, investigate failures, and drive corrective actions for mechanical issues identified during development, validation, or field use.
• Ensure mechanical designs comply with applicable regulatory and quality standards (e.g., FDA, ISO 13485, IEC 60601 standards, material compliance).
• Partner with quality and regulatory teams to support design controls, audits, and regulatory submissions.
• Ensure documentation, design outputs, and change management comply with quality system requirements.
• Lead, mentor, and develop a team of mechanical engineers, fostering technical excellence, accountability, and collaboration.
• Assign work, set technical direction, conduct design reviews, and provide coaching to support professional growth.
• Plan and execute mechanical engineering deliverables in alignment with program schedules and business objectives.
• Prepare annual and multi-year budget and resource plans aligned with business strategy.
• Drive continuous improvement of mechanical engineering processes, tools, and best practices.
• Stay current with advancements in mechanisms/mechatronics, precision gearing, materials, and manufacturing methods.
• Encourage innovation while maintaining disciplined engineering rigor, reliability, and compliance.
• Responsible for ensuring that subordinates follow all Company guidelines related to Health, Safety and Environmental practices.

Senior Manager, Power Tools – R&D Mechanical Engineering

• Take ownership of the full lifecycle of hardware from requirements definition through concept development, design, analysis, testing, qualification, and integration onto a launch vehicle
• Design, analyze, develop, and test primary and secondary metallic and composite structures
• Perform research, develop concepts, and run trade studies
• Build 3D models, detail part drawings, assemblies, installations, and interface control documents
• Build test plans, specifications, and other documentation for the development of flight hardware
• Provide technical guidance and on-site support for manufacturing, production, and integration activities
• Support configuration development and trade studies
• Take ownership of test planning, execution, data reduction, analysis, and authoring of test reports
• Work with multi-functional teams that are responsible for selecting materials, manufacturing processes, and suppliers to produce world-class aerospace hardware
• Develop component specifications and manage suppliers
• Plan, coordinate, conduct tests, and review test data
• Participate in the development and purchase of new equipment and tooling
• Maintain and report on activity schedule, budget, and technical status
• Coach, mentor, and technically assist other engineers
• Find opportunities for improvements and operational cost savings
• Work with spacecraft customers in a technical capacity
• Own spacecraft structural integration cycles
• Drive hardware discrepancies to resolution
• Prepare technical content and present to internal and external customers
• Complete hand calc and FEM analyses to report margins of safety for primary and secondary aerospace structures
• Perform access studies, loss of clearance analyses, vehicle clocking studies, and develop solutions to mission unique requirements
• Collaborate with internal and external teams throughout design, manufacturing, and mission integration.

Structural Design Engineer III

• Conceptualize, design, and develop robotic and automated systems from initial concept to production.
• Perform detailed structural analysis (static, dynamic, thermal) of mechanical components and assemblies using Finite Element Analysis (FEA) and other analytical methods.
• Design and analyze deployable systems and mechanisms, ensuring reliable operation in harsh environments.
• Create and maintain detailed 3D CAD models, drawings, and specifications.
• Develop and execute test plans to validate the performance and reliability of mechanical systems.
• Collaborate with cross-functional teams, including electrical, software, and manufacturing engineers, to ensure seamless integration of mechanical systems.
• Troubleshoot and resolve complex mechanical issues in a timely and efficient manner.
• Mentor junior engineers and contribute to the continuous improvement of our design and analysis processes.

Senior Mechanical Engineer

• Manage work in engineering areas of specialization
• Develop advanced skills and work with greater independence
• Identify problems, develop solutions, and take actions to resolve
• Design protection and control relaying applications for substations
• Manage multiple projects simultaneously to ensure timely release of engineering designs
• Develop detailed project scopes, layouts of control equipment enclosures, and wiring diagram drawings
• Provide construction support to field personnel during project implementation
• Develop and maintain expertise in use of CAD software

Engineer II/III – Protection and Control Design

• Design, analysis, development, and testing of primary and secondary structures
• Create 3D models, detail part drawings, assemblies, installations, and interface control documents
• Create test plans, specifications, and other documentation for the development of flight hardware
• Provide manufacturing and production support
• Support configuration development and trade studies
• Participate in subsystem test planning, execution, data reduction and analysis
• Work with cross-functional teams that are responsible for selecting materials, manufacturing processes, and suppliers to produce world class aerospace hardware.
• Plan, coordinate, conduct tests, and review test data
• Maintain and report on activity schedule, budget and technical status
• Identify opportunities for improvements and operational cost savings

• Investigate the cause and origin of failures, damages, or defects in mechanical systems and components within industrial, commercial, and residential sites
• Analyze the failure of mechanical systems, determine the cause of failures, evaluate the quality of construction, and review design and maintenance procedures
• Perform field investigations, lead multi-party examinations and documentation of damaged property
• Research failure modes, code requirements, and provide recommendations for repair and /or replacement as needed
• Prepare accurate, clear, thorough, and concise reports and related documentation for clients detailing opinions and conclusions
• Participate in multidisciplinary teams on large and complex assignments
• Maintain established relationships with current clients and consultants

• Work on a design team through frequent hardware design cycles and produce technical designs and analysis while supporting qualification, testing, manufacturing, and integration activities
• Foster open communication and present to all levels of leadership within the organization
• Drive solutions forward and advise the team on problem resolutions
• Take ownership of the full lifecycle of hardware from requirements definition through concept development, design, analysis, testing, qualification, and integration onto a launch vehicle
• Design, analyze, develop, and test active and passive thermal control subsystem components and assemblies
• Perform research, develop concepts, and participate in trade studies
• Build detail part 3D models, assemblies, installations, and interface control documents
• Build test plans, specifications, and other documentation for the development of flight hardware
• Provide technical guidance and on-site support for manufacturing, production, and integration activities
• Support configuration development and trade studies
• Take ownership of test planning, execution, data reduction, analysis, and authoring of test reports
• Work with multi-functional teams that are responsible for selecting materials, manufacturing processes, and suppliers to produce world class aerospace hardware
• Develop component specifications and manage suppliers
• Plan, coordinate, conduct tests, and review test data
• Participate in the development and purchase of new equipment and tooling
• Maintain and report on activity schedule, budget and technical status
• Coach, mentor and technically assist other engineers
• Find opportunities for improvements and operational cost savings
• Work with spacecraft customers in a technical capacity
• Drive hardware discrepancies to resolution
• Prepare technical content and present to internal and external customers
• Perform access studies, loss of clearance analyses, vehicle clocking studies, and develop solutions to mission unique requirements
• Collaborate with internal and external teams throughout design, manufacturing, and mission integration

Mechanical Engineer jobs in Florida

See all jobs on JobTailor

Structures Design Engineer II – Lunar Permanence

Mechanical Engineer – Entry Level

Applications Design Engineer

Mechanical Engineer – Mission Critical Data Centers

Systems Design Engineer II

Ground System Design Engineer III

Lead Engineer – Tooling Design Engineer

Senior Engineer – Tooling Design Engineer

Mechanical Engineer, Remote

Forensic Mechanical Engineer

Staff Design Systems Engineer

Mechanical Engineer – PE III

Senior Systems Engineer, Configuration – CAD Design

Senior Manager, Power Tools – R&D Mechanical Engineering

Structural Design Engineer III

Senior Mechanical Engineer

Engineer II/III – Protection and Control Design

Structural Design Engineer III

Forensic Mechanical Engineer

Thermal Subsystem Design Engineer III