Engineer

• Develop and optimize manufacturing processes for PCBAs, including stencil design, solder paste application, pick-and-place operations, and reflow soldering.
• Lead and participate in Design of Experiments (DOEs), Process Failure Mode and Effects Analysis (PFMEA), and other methodologies to enhance process reliability and product quality.
• Provide technical leadership to our Operators while supporting cross-functional teams.
• Configure Bills of Materials (BOMs) and routings in accordance with product structures, standards, and internal procedures.
• Analyze and resolve PCBA defects, identifying root causes and implementing corrective actions.
• Continuously evaluate and improve assembly operations for accuracy, efficiency, and manufacturability.
• Assist in New Product Introduction (NPI) activities for electronic assemblies, ensuring smooth transition from design to production.
• Specify and procure equipment, tools, and instruments required for new and existing processes.
• Maintain accurate documentation of processes and procedures.
• Ensure compliance with Lean Manufacturing principles and drive improvements in yield, cycle time, inventory accuracy, and delivery performance.

SMT Process Engineer

• Provide technical analysis, advice, and support to customers for electric and natural gas energy efficiency projects
• Participate in the development of program and implementation plans for energy efficiency programs
• Review technical parameters and confirm that projects conform to engineering standards and energy codes
• Perform energy analysis to determine energy savings
• Provide guidance to ensure projects yield measurable energy savings
• Conduct inspections of equipment and operations in alignment with energy savings calculations
• Collaborate with third parties and customers for energy efficiency program implementation
• Conduct detailed analysis of high efficiency HVAC equipment, motors, and lighting systems
• Provide training and support services for energy efficiency team and program marketing activities
• Support Eversource in national energy efficiency conferences and stakeholder events

Energy Engineer

• Completes assigned work within the schedule and number of hours provided.
• Supports the preparation and modification of project reports, plans, designs, and calculations.
• Assists in the preparation of project quantity and cost estimates.
• Assists engineering teams with organization and administrative support of design files.
• Supports engineering teams with various tasks and duties including but not limited to research, data collection, field investigations, development, and design of projects.
• Performs other duties as assigned

New Grad Engineer I – Northeast Division

• Completes assigned work within the schedule and number of hours provided
• Supports the preparation and modification of project reports, plans, designs, and calculations
• Assists in the preparation of project quantity and cost estimates
• Assists engineering teams with organization and administrative support of design files
• Supports engineering teams with various tasks and duties including but not limited to research, data collection, field investigations, development, and design of projects
• Performs other duties as assigned

New Grad Engineer I – Winter/Summer 2027

• The Development Engineer is the technical lead on projects and is responsible for technical aspects of the product design from concept through development, qualification and production.
• Create 3D conceptual models to meet design requirements
• Select material specifications to meet environmental requirements
• Perform design trade studies, hand calculations, and tolerance studies to ensure design fidelity
• Interact with customers on design, interface and functional details
• Interact with suppliers to rapid prototype parts for risk reduction and prototype testing
• Participate in problem solving and failure analysis activities
• Requirements generation, allocation and flow down
• Technical compliance and risk assessment/management
• Coordination of project team technical tasks
• Cost estimating and management for both proposal and program activity
• Leading the project throughout the product development life cycle

Development Engineer – Defense

• Serve as the technical lead on projects
• Responsible for technical aspects of the product design from concept through development, qualification and production
• Perform conceptual development and modeling of energetic components and systems
• Ensure product designs meet customer requirements
• Create 3D conceptual models to meet design requirements
• Select material specifications to meet environmental requirements
• Perform design trade studies, hand calculations, and tolerance studies
• Interact with customers on design, interface and functional details
• Interact with suppliers to rapid prototype parts
• Participate in problem solving and failure analysis activities
• Requirements generation, allocation and flow down
• Technical compliance and risk assessment/management
• Coordination of project team technical tasks
• Cost estimating and management for both proposal and program activity
• Coordinate with other departments for documentation and approvals

• Process Documentation & Standardization: Author, maintain, and version-control SOPs, work instructions, and process flow diagrams for manufacturing operations
• Cross-Functional Coordination: Act as the central coordinator between manufacturing, quality, engineering, and supply chain; tracking open items and driving cross-functional work to closure
• Production Tracking & Reporting: Collect, consolidate, and report on daily and weekly production data including output, cycle times, yield, utilization, and scrap rates
• Change Management Support: Coordinate engineering change order (ECO/ECN) workflows and ensure EBOM/MBOM changes are communicated to and implemented on the production floor
• Continuous Improvement Support: Support kaizen events, value stream mapping (VSM) exercises, and Lean/Continuous Improvement project tracking
• Facility Buildout & Ramp-Up Support: Coordinate equipment qualification activities, readiness milestone tracking, and associated documentation

Manufacturing Engineer

• Serve as a senior technical advisor for electrical substation, underground transmission, protection, and control projects
• Provide senior-level technical leadership and engineering expertise for substation and transmission projects
• Independently plan, execute, and oversee complex engineering assignments
• Evaluate, adapt, and develop engineering solutions to address technical challenges
• Mentor and supervise junior engineers and technical staff
• Ensure compliance with applicable design codes, building codes, OSHA, FERC, NERC, and CIP standards
• Support cost-benefit analyses and evaluation of alternative engineering approaches
• Develop technical specifications for services, equipment, and materials
• Coordinate with clients, consultants, contractors, vendors, and internal project teams
• Review and provide comments on engineering drawings, calculations, specifications, and design deliverables
• Assist with bid evaluations, contract reviews, and award recommendations
• Prepare technical reports and engineering documentation for executive and public review
• Provide expert technical testimony and support when required
• Communicate effectively with stakeholders at all levels, both verbally and in writing
• Analyze and resolve complex technical issues using sound engineering judgment

Substation Owner's Engineer

• Receive alarms from fuel cells, use manuals and troubleshooting guides to provide a comprehensive work order for field service personnel.
• Take remote action when possible, to tune fuel cell and ancillary equipment to optimize system performance.
• Conduct remote fuel cell starts.
• Communicate all fuel cell outages to the HyAxiom FCA Senior Management team.
• Work with new and existing monitoring systems to analyze the health of the fleet, troubleshoot systems, support field service, and optimize power plant performance.
• Develops plans to meet the objectives of short and longer-term assignments.
• Demonstrates effective problem-solving skills.
• Encourage and build mutual trust, respect and cooperation among team members and beyond.

Engineer, Control Center

• Responsible for the planning and distribution of discipline-specific work, and adherence to the schedule and budget on projects.
• Assists in marketing responsibilities, including proposal generation.
• Assists with the development of scope of work and level of effort for projects and/or assignments within discipline.
• Oversees completeness and accuracy of project team’s work within the technical discipline.
• Guides and mentors team to overall project objectives.
• Coordinates technical aspects of project with client counterpart and teaming partners at staff level for work within the discipline.
• Works closely with other disciplines on multi-discipline projects.
• Performs other duties as assigned.

Geotechnical Project Engineer

• Lead technical engagements end-to-end
• Write and ship production code (Python, TypeScript, Node)
• Architect solutions that pass customer Infosec and ARB review
• Lead high-energy customer hackathons
• Build and maintain reusable technical assets
• Partner with Enterprise Architects
• Evangelize Twilio within the B2B builder communities
• Utilize your software engineering expertise
• Work closely with the Demo Platform Engineering and Enterprise Architect teams
• Synthesize field insights from production deployments

Forward Deployed Engineer

• Monitor assigned manufacturing equipment and assist with troubleshooting activities to support equipment performance and reliability.
• Perform routine support for corrective maintenance, preventive maintenance, and equipment improvement activities to help maximize equipment uptime and performance.
• Maintain equipment documentation with guidance, including procedures, troubleshooting guides, and calibration schedules.
• Coordinate with equipment vendors under guidance for service activities, technical support, and equipment-related projects.
• Assist with equipment qualifications, re-qualifications, and validation activities to support quality and process requirements.
• Participate in root cause investigations by gathering data and assisting with problem-solving activities.
• Monitor equipment performance metrics and assist in identifying opportunities for improvement.
• Support equipment installation, relocation, and decommissioning activities.
• Contribute to cross-functional improvement projects focused on equipment performance, process efficiency, and manufacturing objectives while developing knowledge of company systems and processes.
• Follow cleanroom protocols and comply with all EHS procedures to support a safe work environment.
• Perform additional responsibilities as assigned.
• Travel Occasional Travel (5-10%) for training, vendor support, FAT/SAT, or equipment installations.

Equipment Engineer I

• Help lead complex technical projects across manufacturing sites
• Resolve operational/quality issues and drive process, product, and technology improvements
• Serve as an internal consultant and problem-solver, drive innovation and continuous improvement
• Evaluate and implement new ingredients, components, and production technologies
• Lead and prioritize short- and long-term projects based on safety, quality, cost, delivery, and risk
• Identify opportunities to increase customer value and improve profitability
• Provide technical guidance to site teams and contribute to innovation objectives
• Lead cross-functional teams and execute projects independently or collaboratively
• Support product sampling and in-plant trials using appropriate sanitary practices
• Support quality testing and execute trials for new products
• Partner with Supply Chain to ensure co-manufacturing outcomes meet expectations

Process Engineer

• Own the structure, accuracy, and governance of module BOMs, Electrical Balance of Plant (EBOP) BOMs, Mechanical Balance of Plant BOMs, and service and as-built BOMs.
• Implement and maintain BOMs within the D365 ERP system to support operational accuracy and control.
• Monitor planned engineering and supplier product updates and assess their impact on Supply Chain, Manufacturing, Quality, Cost Accounting, and Service.
• Lead the process, system, and manufacturing data updates required to support planned changes while helping to maintain continuity, product quality, and cost efficiency.
• Enforce change control protocols and ensure operational bills of material and item settings are accurate and ready to support procurement, production, and financial planning.
• Evaluate operational BOM and item configurations and drive improvements that increase efficiency, enable automation, reduce risk, support best practices, and facilitate scale-up.
• Facilitate effective cross-functional collaboration by providing direction and support to Supply Chain, Manufacturing, Quality, Cost Accounting, and Service teams.
• Identify and mitigate risks related to material and process changes, scale-up activities, and systems improvement initiatives.
• Support issue resolution and promote alignment with company standard operating procedures.
• Define and support the implementation of key metrics, process controls, reporting tools, and continuous improvement initiatives aligned with Lean best practices.
• Maintain process documentation and support organizational changes and operational transitions as needed.

Industrial Engineer – Product Data and BOM Management

• Design and program building automation systems, site-specific configuration of control system, and control algorithms.
• Adhere to project requirements and company and customer standards of design, programming, and implementation.
• Create a clear design document for project teams with technical information.
• Document and communicate the building automation system design and revisions.
• Develop graphical and text-based interfaces for building automation systems.
• Test programming and interfaces prior to implementation.
• Provide technical support to sales representatives to ensure customers’ needs are met.
• Identify and communicate project opportunities and risks.
• Support functional testing for building systems.

Associate Controls Engineer – Building Automation (BAS)

• Analyze incident trends and data across a broad set of technologies to drive improvements in the stability and resiliency of critical enterprise systems.
• Translate complex technical findings into clear, executive-ready presentations and reports that inform decision-making at various levels of leadership.
• Collaborate broadly across ETS and business partners while working with a high degree of autonomy and accountability.
• Conduct trending and analysis of technology incidents, evaluating and making recommendations regarding themes and candidates for deeper analysis and root cause investigation.
• Complete data analysis across a broad set of information using Excel and other available tools to find common patterns/trends.
• Analyze data in aggregate to identify broader issues, including those that may be less obvious.
• Conduct deep Root Cause Analysis to identify the true source of problems (using tools like the 5 Whys).
• Problem-solve and collaborate with other teams to uncover and assess information.
• Identify ways to use automation for analysis and to drive solutions.
• Craft executive-ready presentations and reports using data visualizations, diagrams, and structured narratives that tell a clear story and drive informed decision-making.

Senior Associate Engineer – ITSM Analysis, Resiliency

• Provide expert-level guidance on complex fire safety challenges and risk mitigation.
• Establish company-wide engineering standards, design criteria, and best practices.
• Lead and actively participate in national fire protection code and standards committees, contributing technical expertise to energy storage fire and life safety codes.
• Serve as primary technical interface with Authorities Having Jurisdiction (AHJs), fire marshals, insurers, and independent engineers on fire and life safety topics while leveraging 3rd party EORs as needed.
• Travel to attend in-person meetings as required.
• Develop project-specific basis-of-design documents for fire protection systems.
• Develop scopes of work, RFPs, and evaluation criteria for 3rd party fire protection engineers-of-record (EOR) firms and equipment vendors.
• Daily management and oversight of fire protection EORs, including design deliverable schedules and engineering budgets.
• QA/QC of 3rd party work products (Hazard Mitigation Analysis, Emergency Response Plan, Fire Alarm Design, etc.) to ensure consistency with industry standards, SOLV standards, OEM Requirements, and project requirements.
• Collaborate cross-functionally with other engineering disciplines (primarily electrical and SCADA) to ensure design consistency and project efficiency.
• Support the fire protection design optimization for cost, performance, and constructability.
• Provide technical support during fire system testing and commissioning.
• Lead engagement with Owners as needed to answer relevant questions around fire protection design and strategy.
• Provide technical training to the larger SOLV team as needed.

Principal Fire Protection Engineer

• Be able to perform all essential Engineer II responsibilities
• Document meeting minutes for engineering and permitting-related meetings and distribute action items.
• Review technical RFP documents and provide engineering and permitting input to the estimating team.
• Represent SOLV engineering and permitting teams during pursuit and early-phase coordination meetings.
• Ensure coordination of design deliverables prepared by internal and external stakeholders responsible for the project scope of work.
• Develop working knowledge of project-specific design requirements, including SOLV standards, owner/contract requirements, and permitting conditions.
• Review consultant deliverables for alignment with project-specific requirements and flag deviations or risks for escalation.
• Track and manage engineering and permitting deliverable schedules in coordination with project management.
• Act as a single point of contact for all engineering disciplines to internal and external stakeholders.
• Review and approve consultant proposals, scopes of work, schedules, and budgets.
• Provide QA/QC oversight of individual consultant work products as well as the fully integrated, multi-discipline design.
• Share lessons learned and best practices across projects to improve future execution.
• Manage Owner, Owner’s Engineer, and Independent Engineer submittals.
• Coordinate review comments with consultants and track responses to closure.
• Assist in responding to Owner and IE comments and clarifications.
• Support permitting efforts by coordinating with Authorities Having Jurisdiction (AHJs) at the federal, state, and local levels.
• Attend in-person AHJ meetings as needed.
• Track engineering and permitting changes that may impact project scope, cost, or schedule and elevate risks appropriately.
• Assist with due diligence during RFP stages, including review of CUPs, environmental studies, wetlands permits, and related documentation.
• Support preparation, QA/QC, and submission of permit applications.
• Review EPC contract exhibits related to owner- and contractor-obtained permits and flag issues or inconsistencies.
• Identify gaps in existing engineering process and workflow through collaboration with internal and external stakeholders.
• Develop process updates and standards to increase efficiency and value of overall Engineering team.
• Train up the team on process changes.

Engineer 3

• Emphasize safety as the highest priority and ensure all field and office employees follow safe work practices.
• Collaborate with internal teams to collect and consolidate data needed to complete reports and Acceptance Tests.
• Support onboarding and commissioning of O&M/EPC projects into SOLV Energy’s internal Performance Team platforms.
• Generate, maintain, deliver, and track Operations and Performance Reports, Acceptance Tests, Commissioning Plans, Test Reports, Vitals, forecasting reports, and Yearly Guarantees.
• Understand reporting requirements and deliverables for each project, including weekly, quarterly, and annual reports, commissioning deadlines, and test procedures.
• Work with Performance Engineers to track fleetwide issues (equipment, parts, manufacturers, etc.) and share findings to support optimization.
• Maintain a strong understanding of contractual guarantees and excusable events defined in O&M/EPC agreements.
• Track equipment and commissioning activities and accurately account for excusable lost energy to maintain contractual availability and performance metrics.
• Coordinate with field teams to communicate ongoing issues and remediation schedules.
• Attend internal meetings to escalate issues related to low availability, low performance, or lack of work orders.
• Identify and troubleshoot issues with analytical tools, including Vitals and the Performance Check Tool.
• Collaborate with Performance Engineers and Managers to resolve issues and support ad-hoc reporting and analysis.
• Apply understanding of project design and on-site equipment to evaluate lost energy and overall system performance.
• Maintain accurate operations documents, procedures, and internal training materials.
• Update internal and client-facing reports using internal tools and support work prioritization for field teams based on criticality and failure occurrence.
• Build and maintain strong working relationships with fellow Performance Engineers while maintaining project ownership and success.
• Support project reviews and client ad-hoc requests related to performance; escalate issues to management when necessary.
• Drive plant performance optimization initiatives and collaborate with fellow Performance Engineers and Field team.
• Review work orders & logs, commissioning documents, and turnover packages to identify root causes of equipment underperformance and failure modes.
• Calculate and analyze energy losses and system performance impacts using internal tools and ad-hoc analyses.
• Identify operational issues and support resolution efforts with OEM vendors, field technicians, SCADA engineers, and other stakeholders.
• Assist development and improvement of data analytics and software tools with Performance Engineers and Managers.
• Review performance and operations reports created by Performance Engineers to ensure accuracy and identify performance issues.
• Track contractual guarantees and participate in periodic risk assessments to identify potential improvements, remediations, or optimizations.
• Evaluate PV system energy models for utility-scale solar projects using PVsyst or similar tools.
• Verify project drawings, including site plans, system layouts, one-lines, cable management, and equipment installation details.
• Create troubleshooting and reporting templates as needed and maintain workflow templates with updates.
• Execute assigned tasks in the Performance Engineering Workflow Process while maintaining accurate and up-to-date status notes.
• Perform other duties as assigned.

Performance Engineer II

• Ensure engine and control system hardware and software are properly configured to support ground and flight test operations, including setup, validation, and readiness activities.
• Perform engine system performance evaluation and prognostic health analysis, document findings, and troubleshoot control system issues to drive timely resolution.
• Support the full test execution lifecycle by participating in test planning, pre‑ and post‑test briefings, mission control room data monitoring, and coordination with test cell and flight line teams.
• Execute and maintain software and diagnostic tools used during testing, ensuring accurate configuration, data integrity, and effective communication of status and emerging issues.
• Configure and execute test checkout of hardware/software configurations on electronic verification benches.

Engineer jobs in Connecticut

See all jobs on JobTailor

SMT Process Engineer

Energy Engineer

New Grad Engineer I – Northeast Division

New Grad Engineer I – Winter/Summer 2027

Development Engineer – Defense

Development Engineer – Defense

Manufacturing Engineer

Substation Owner's Engineer

Engineer, Control Center

Geotechnical Project Engineer

Forward Deployed Engineer

Equipment Engineer I

Process Engineer

Industrial Engineer – Product Data and BOM Management

Associate Controls Engineer – Building Automation (BAS)

Senior Associate Engineer – ITSM Analysis, Resiliency

Principal Fire Protection Engineer

Engineer 3

Performance Engineer II

Senior Test & Validation Engineer, P3