Electrical Engineer

• Perform detailed simulations related to high speed signal integrity, power system integrity, etc that ensure quality performance of Spectacles subsystems.
• Simulate and AC and DC power distribution networks and define impedance masks
• Design in complex SOCs, PMICs, Wireless ICs and sensors used in low-power consumer electronics
• Lead and contribute to technical design reviews
• Supervise and review layout for PCB, Flex, and Rigid Flex designs related SI, PI, EMC, EMI, etc
• Debug hardware issues with cross-functional teams such as desense, power states, signal integrity, ESD and EMI
• Analyze circuit parasitics and tolerances to ensure correct operation over the specified voltage and temperature range
• Test and validate board level and systems level aspects of electrical designs
• Collaborate closely with mechanical, software, RF, thermal and industrial design teams
• Author clear and comprehensive electrical test documentation
• Develop electronic prototypes for new product concepts
• Support development builds onsite at external contract manufacturers

Electrical Signal Integrity Engineer

• Own the electrical hardware design for in-house display modules from concept through validation and release, including architecture definition, circuit design direction, and technical decision-making for multiple display variants
• Develop and review schematics, BOMs, PCB layouts, and related design documentation, and ensure that the design content is aligned with GM requirements and milestone timing
• Drive hardware design reviews and major technical reviews with internal stakeholders and suppliers, including EMC, high-speed interface, power sequencing, signal integrity, and power integrity reviews
• Perform or direct design analysis such as worst-case analysis, tolerance studies, startup and sequencing analysis, thermal review, and circuit compliance checks to confirm that the design meets all electrical and functional requirements
• Define and validate power architecture and power mode behavior, including low-voltage/cranking behavior, reset strategy, wake-up logic, parasitic current, and protection for reverse battery, jump start, shorts, and open circuits
• Lead the design and integration of display electrical interfaces such as SERDES/deserializer links, eDP/OLDI/LVDS-class video paths, touch controller interfaces, MCU interfaces, or auxiliary I/O content where applicable
• Partner with software, systems, mechanical, validation, quality, and supplier teams to resolve cross-functional integration issues, debug root causes, and deliver robust module performance at the component and vehicle levels
• Support component selection and sourcing strategy for key semiconductors and display-related hardware, with attention to approved part lists, resiliency, supplier capability, and cost/performance trade-offs
• Ensure the design is ready for DV/PV validation, including ADVP&R alignment, test planning, diagnostic coverage, failure detection strategy, and compliance with GM and regulatory requirements
• Create and maintain technical artifacts such as DFMEA, open issue tracking, interface definitions, design reports, lessons learned, and release-ready engineering documentation.

Staff Hardware Engineer – Display Electronics

• Designing mission systems technical baselines (subsystems, components, software) to meet platform requirements.
• Leading trade studies, technical analysis, modeling & simulation, risk/opportunity management, and support strategic objectives.
• Decomposing system-level requirements, tracking/reporting metrics, and maintaining strong relationships with customers, suppliers, peers, and leadership.

Principal Electronics Engineer – Mission Systems

• Contribute to a team committed to delivering the next generation of CardioMEMS products to help our patients (and their clinicians) manage their heart failure
• Conduct bench and preclinical studies supporting product development teams for concept feasibility and formal regulatory submission
• Contribute to the continuous improvement of CardioMEMS electronic designs
• Draft test protocols and reports
• Independently plan, coordinate, and execute activity in support of project goals
• Support design reviews
• Support development of risk management documentation
• Gain an understanding of the quality and regulatory requirements of Abbott, FDA and ISO regulations
• Comply with U.S. Food and Drug Administration (FDA) regulations, other regulatory requirements, Company policies, operating procedures, processes, and task assignments.
• Maintain positive and cooperative communications and collaboration with all levels of employees, customers, contractors, and vendors
• Perform other related duties and responsibilities, on occasion, as assigned

Senior Electrical Engineer, Medical Devices

• Architect, lead, and deliver state-of-the-art avionics, electrical weapon interfaces, and custom/COTS Line Replaceable Units (LRUs) for missile systems, Unmanned Aerial Vehicles (UAVs), and fieldable launch platforms
• Support complex system co-designs utilizing high-performance Xilinx/AMD Zynq SoCs, Altera FPGAs, soft-core processors (MicroBlaze), and complex network architectures (bare-metal, RTOS-based, UDP/IP stacks, and Weapon Open System Architecture/WOSA messaging frameworks)
• Oversee complex Multi-Layer Power Distribution Network (PDN) definitions, multi-rail low-noise regulation circuits, rigid-flex PCBA layouts, and high-speed digital interfaces (PCIe, multi-Gbps transceivers, ADCs/DACs, and RF modems)
• Direct multi-disciplinary Integrated Product Teams (IPTs) for electronics, cabling, grounding, and bonding
• Act as the primary internal technical authority, hosting weekly technical interchange meetings with external subcontractors to maintain design consistency
• Partner with systems engineering teams to translate military standards into rigorous hardware requirements
• Support Control Account Managers (CAMs) by providing precise technical write-ups, work breakdowns, and schedule estimates for Earned Value Management (EVM), CapEx initiatives, and major competitive proposals
• Act as a certified test conductor or lead verification engineer to establish comprehensive system-level test plans, environmental stress screening, HWIL integration, and launch-readiness countdown actions

Lead Electrical Systems Engineer

• Architect, lead, and deliver state-of-the-art avionics, electrical weapon interfaces, and custom/COTS Line Replaceable Units (LRUs) for missile systems, Unmanned Aerial Vehicles (UAVs), and fieldable launch platforms.
• Support complex system co-designs utilizing high-performance Xilinx/AMD Zynq SoCs, Altera FPGAs, soft-core processors (MicroBlaze), and complex network architectures (bare-metal, RTOS-based, UDP/IP stacks, and Weapon Open System Architecture/WOSA messaging frameworks).
• Oversee complex Multi-Layer Power Distribution Network (PDN) definitions, multi-rail low-noise regulation circuits, rigid-flex PCBA layouts, and high-speed digital interfaces (PCIe, multi-Gbps transceivers, ADCs/DACs, and RF modems).
• Direct multi-disciplinary Integrated Product Teams (IPTs) for electronics, cabling, grounding, and bonding.
• Act as the primary internal technical authority, hosting weekly technical interchange meetings with external subcontractors to maintain design consistency.
• Partner with systems engineering teams to translate military standards into rigorous hardware requirements.
• Support Control Account Managers (CAMs) by providing precise technical write-ups, work breakdowns, and schedule estimates for Earned Value Management (EVM), CapEx initiatives, and major competitive proposals.
• Act as a certified test conductor or lead verification engineer to establish comprehensive system-level test plans, environmental stress screening, HWIL integration, and launch-readiness countdown actions.

• Help architect, develop, and refine electrical systems
• Define architecture and select components for complex embedded systems
• Work and direct others through detailed design of logic, interconnect, power, RF and sensing systems
• Integrate cameras and imaging electronics
• Incorporate DFM and manufacturing considerations for high-quality production
• Create and carry out validation plan for system electronics
• Solve reliability, yield, and performance issues during development and production

Staff Electrical Engineer

• Engage in dynamic collaboration with verification engineers, designers, and cross-functional teams.
• Ensure the successful verification and quality of the ASIC throughout its lifecycle.
• Lead and participate in failure analysis efforts, determining contributing factors and corrective actions.
• Lead activities aiming at improving product performance, yield, and reliability.
• Define, and refine post silicon validation plans covering functionality, performance characterization, and reliability.
• Capture, analyze, and interpret device performance, waveforms, eye diagrams, jitter, BER, PDN measurements, power supply stability and noise.
• Validate system-level behavior under real-world networking workloads.
• Contribute to the chip screening test and observability software library (Python, C++).

Senior Hardware Engineer – SoC Electrical Failure Analysis

• Lead bring-up of new sub-systems (torso, perception, energy, compute) and their integration into full humanoid robotic systems.
• Bring-up and integration of full robotic systems & drive collaboration with key partners and stakeholders.
• Verify hardware/software interfaces and confirm system-level interactions during early development stages.
• Develop, execute, and scale integration plans, anticipating future obstacles and developing plans to ensure readiness for prototype builds and delivery to partners and engineering verification and validation test campaigns.
• Architect the strategy for nominal path functional tests to confirm correct operation of robot mobility, manipulation, perception, charging, and other functions.
• Drive technical direction for the development of integration-level test cases and automated test workflows.
• Track system-level performance, risks, & stability and provide feedback for design iteration.
• Drive resolution of complex, systematic issues identified in system bring-up or functional testing and provide mentorship to the team to triage and resolve issues.
• Drive cross-functional debugging sessions spanning mechanical, electrical, and software teams.
• Use structured problem-solving and data analysis methods to identify root causes and define corrective actions.
• Work closely with systems, hardware, software, and test engineers to ensure alignment between design intent, requirements, and system performance.
• Document integration issues and outcomes in internal knowledge bases to accelerate future debugging and prevent recurrence.
• Lead the creation and implementation of tools, diagnostic systems, and workflows that improve team productivity and system stability across the integration function.
• Mentor engineers and technicians in systematic troubleshooting and integration practices.

Staff Systems Integration Engineer – Power & Compute

• General Motors is expanding its in-house electronics capabilities to support next-generation Central Compute, ADAS, and software-defined vehicle platforms.
• The Senior Electrical Hardware Engineer will contribute across electrical architecture, circuit design, hardware integration, and validation to deliver robust, production-ready ECUs.
• This role requires strong electrical engineering fundamentals combined with system-level thinking.
• The engineer will work across schematic development, component selection, layout guidance, electrical analysis, bring-up, and hardware/software interface definition.

Senior Electrical Hardware Engineer – Central Compute Unit

• Lead system-level certification activities and support product commercialization
• Act as a technical interface with UL engineers
• Coordinate certification schedules and approval workflows
• Review and validate compatibility between products and connected devices

Fire Alarm Electrical Engineer

• Apply experience, technical knowledge, and problem-solving skills for the development and review of technical approaches and detailed electrical & control system design
• Design and develop electrical and control systems in accordance with applicable specifications, codes, and standards
• Perform electrical design calculations, including load flow analysis, short circuit studies, and protective device coordination assessments
• Work with engineers and technical experts to design and implement instrumentation and automation systems
• Prepare and update technical documentation and drawings—including Single Line Diagrams, Schematics, Wiring Diagrams, specifications, etc.—for both Power and Control Systems in accordance with applicable industry codes and standards
• Conduct site surveys and inspections to assess installation and operation of both electrical and control systems
• Prepare for and participate in meetings with clients, regulatory personnel, and other parties; Work plan development, data evaluation, and report writing
• Responsible for scoping, executing, managing, and delivering multiple concurrent project assignments at both task and project levels

Mid-Career Electrical & Control Engineer – Water & Wastewater

• Own the development of vehicle power electronics from clean sheet to flight. For example: solar power conversion, battery management systems, power distribution and load management, voltage regulators, etc
• Develop and implement PCBA requirements, use-cases, and system integration
• Schematic capture and PCBA layout for power and analog circuits in Altium Designer
• Design analysis including power, size, mass, Monte Carlo tolerances, and reliability related
• PCBA design verification testing, qualification testing, and system integration testing
• Lead design reviews for inter-disciplinary audiences
• Manufacturing and flight support as needed

Principal Power Electrical Engineer

• Own mixed signal PCBA development from clean sheet through qualification and flight
• Define requirements, architectures, and con ops in collaboration with cross-functional engineering teams
• Perform schematic capture and PCB layout of complex power, digital, and analog circuit PCBAs using Altium Designer
• Design analysis, including power, size, mass, Monte Carlo tolerances, signal integrity, and reliability-related.
• Lead PCBA design verification testing, qualification testing, and system integration efforts
• Drive and present design reviews for interdisciplinary audiences, providing technical leadership and clear trade recommendations
• Support manufacturing, environmental testing, and flight operations as needed

Staff Mixed Signal Electrical Engineer

• Own the Electrical Power Subsystem (EPS) of Astrolab Rovers including the subsystem architecture, requirements, design, analysis, testing, delivery, and operation of power generation, storage, and distribution electronics for the vehicle
• Lead the Power Electrical Engineering team of 4+ people in the development and delivery of power system components including solar arrays, batteries, power conversion and distribution, and motor controller electronics
• Support Power EE direct reports through their technical work, performance evaluations, and career growth
• Own the vehicle Power Budget including system loads, sizing of the solar array and battery pack, and operational power modes
• Design analysis including power, size, mass, Monte Carlo tolerances, and reliability related
• Support the electro-mechanical strategy for power transmission and components
• Support qualification and integration testing of EPS components
• Support vehicle commissioning and mission operations related to the Electrical Power Subsystem

Lead Power System Electrical Engineer

• Design and develop electrical solutions and supporting hardware for laboratory and aircraft test environments.
• Collaborate with cross-functional teams and external suppliers to define requirements.
• Support build and integration activities, and ensure quality, schedule, and cost objectives are met.
• Plan, execute, and support system-level testing and evaluation, including test preparation, data analysis, troubleshooting, and verification of requirements.

Associate Engineer, Electrical

• Own the Computing and GNC hardware subsystems including subsystem architectures, requirements, design, analysis, testing, delivery, and operation of those systems on the vehicle.
• Lead the Computing Electrical Engineering team of 5+ people in the development and delivery of system components including vehicle computers, networking, clocking, GNC sensors, servo controllers, and other mixed signal electronics for the vehicle.
• Support Computing Engineering direct reports through their technical work, performance evaluations, and career growth.
• Own mixed signal PCBA development from clean sheet to flight.
• Develop PCBA requirements, architectures, and con-ops in collaboration with other engineering disciplines.
• Schematic capture and PCB layout of power, digital, and analog circuit PCBAs using Altium Designer.
• Design analysis including power, size, mass, Monte Carlo tolerances, signal integrity, and reliability related.
• Unit design verification testing, qualification testing, and system integration testing.
• Lead design reviews for inter-disciplinary audiences.
• Vehicle assembly, test, and operations support as needed.

Lead Computing Electrical Engineer

• Own wireless communications systems and components from architecture to component selection, integration, test, and operations. Systems may be focused on interplanetary and local lunar communication links.
• Develop interface and functional requirements and specifications to design to in collaboration with other engineering disciplines
• Select, procure, and test RF components to ensure qualification for purpose on Astrolab’s interplanetary systems. Qualification may include environmental testing as necessary.
• Perform detailed RF component performance analysis to support end-to-end communication system requirements (e.g., EVM, gain/stability, noise figure, etc.) in addition to interdisciplinary system design (e.g., power, thermal, etc.).
• Implement communication system integration test beds including ground support equipment
• Perform end-to-end system testing including vehicle integration and ground station systems integration testing
• Develop test plans/procedures to support the execution test events
• Support vehicle mission operations to help maintain reliable communication links
• Lead design reviews and collaboration with multi-disciplinary audiences

Senior RF Electrical Engineer

• Design, develop, and test embedded software for charging and power systems of the Zoox vehicle
• Integrate supplier sub-systems into the Zoox software stack
• Create software requirements, design documentation, test plans, and other supporting documentation
• Work cross-functionally with vehicle engineers, controls engineers, software engineers, validation engineers, and other experts to ensure a seamless and highly-automated experience for the Zoox vehicle
• Contribute to all phases of the software development cycle including prototyping, requirements capture, design, implementation, and validation

Embedded Software Engineer – Power Systems

• Work with a team of developers, Transmission Team members, and project engineering experts, to identify sites for new projects.
• Prepare interconnection application materials.
• Study project impacts to the utility grid and develop solutions to issues arising throughout the interconnection process.
• Coordinate with EPC, NERC Compliance, and Asset Management to ensure plant models are transitioned through the development and construction phases and into commercial operations.
• Perform studies to estimate reliable injection limits.
• Review and validate utility interconnection studies.
• Coordinate with the Transmission Team to mitigate any issues arising in the interconnection study process.
• Prepare generator interconnection request packages, including dynamic models of the proposed project.
• Maintain dynamic models of the project through the interconnection process.
• Coordinate with the EPC team during construction, and hand over the final plant model to Asset Management at Commercial Operations.

Electrical Engineer jobs in California

See all jobs on JobTailor

Electrical Signal Integrity Engineer

Staff Hardware Engineer – Display Electronics

Principal Electronics Engineer – Mission Systems

Senior Electrical Engineer, Medical Devices

Lead Electrical Systems Engineer

Lead Electrical Systems Engineer

Staff Electrical Engineer

Senior Hardware Engineer – SoC Electrical Failure Analysis

Staff Systems Integration Engineer – Power & Compute

Senior Electrical Hardware Engineer – Central Compute Unit

Fire Alarm Electrical Engineer

Mid-Career Electrical & Control Engineer – Water & Wastewater

Principal Power Electrical Engineer

Staff Mixed Signal Electrical Engineer

Lead Power System Electrical Engineer

Associate Engineer, Electrical

Lead Computing Electrical Engineer

Senior RF Electrical Engineer

Embedded Software Engineer – Power Systems

Power Systems Engineer