Technician

• Install windshields and auto glass in the shop or from a mobile operation unit
• Calibrate vehicle electronics, including ADAS systems, Lane Departure Warning, and Forward Collision Alert
• Repair chips and other glass damage
• Interact with customers to ensure satisfaction
• Process payments from mobile customers
• Maintain a professional appearance and positive attitude
• Provide World Class customer service to customers and vendors
• Perform driving duties monitored and recorded by a telematics device for safety and compliance

Master auto glass technician installing and calibrating vehicle glass for Auto Glass Now in Hattiesburg

Master Auto Glass Installation Technician

Master auto glass technician installing, repairing, and calibrating vehicle glass for Auto Glass Now. Serving customers in-shop and through mobile operations in Hattiesburg.

• Responsible for end-to-end testing, downloading programming, starting up, commissioning, and servicing on assigned projects.
• Represents the company by serving as the direct customer contact and is responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, examining, diagnosing and repairing equipment and systems at customer’s location.
• Coordinates with team leader/project manager and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.
• Uses cutting edge software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units.
• Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.
• Mentor team members.
• Display team effort and dedication to customer by maintaining flexibility to work overtime and weeks as the business requires, including occasional overnight stays.

Senior HVAC/Chiller Technician servicing commercial HVAC equipment

Senior HVAC/Chiller Technician

Senior HVAC/Chiller Technician at Trane Technologies servicing and maintaining commercial HVAC systems. Focusing on troubleshooting, repair, and customer satisfaction in commercial environments.

• Responsible for commissioning, programming, setting up graphics, communications link, end to end testing, troubleshooting and servicing on assigned projects.
• Responsible for documenting point to point verification, sequence of operations validation and job close out requirements.
• Represents the company by serving as the direct customer contact and is responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location.
• Coordinates with team leader and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.
• Keeps current on Trane products concerning installation, operation, maintenance, service, and repair of direct digital control systems.
• Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.
• Displays team effort and dedication to customers by maintaining flexibility to work overtime and weeks as the business requires, including occasional overnight stays.

Controls Technician responsible for servicing HVAC systems at customer locations

Controls Technician

Controls Technician responsible for commissioning and servicing HVAC systems at customer sites. Represents the company while ensuring customer satisfaction with equipment and system repairs.

• Conducts pre-donation medical screening.
• Interaction and responsiveness to customer needs.
• Assesses donor suitability and engages in set-up.
• Provides appropriate feedback to ineligible donor candidates.
• Ensures all donor screening information is complete.
• Ensures donor confidentiality.

Donor Center Technician conducting pre-donation medical screenings and customer interactions

Donor Center Technician

Donor Center Technician performing pre-donation medical screenings and ensuring donor suitability while engaging with customers. Responsibilities include maintaining confidentiality and providing necessary feedback.

• Travel to customer locations in a company-provided repair van.
• Diagnose and repair smartphones, tablets, and other consumer electronics.
• Provide professional, convenient in-home repair services.
• Educate customers on device protection options and support plans.
• Manage your daily schedule while delivering excellent customer experiences.
• Complete quality repairs efficiently and accurately.

Field Technician providing mobile repair services for electronic devices

Field Technician – Mobile Repairs

Field Technician providing mobile repair services for electronic devices. Traveling to customer locations to diagnose and repair smartphones and tablets.

• Applies technical knowledge to assist customers
• Answers inbound and outbound phone calls in support of Autel scanning unit
• Answers technical questions relating to the scanning procedures of the Autel unit
• Conducts research to understand, explain, and resolve technology issues on the vehicle

Mobile Diagnostic Technician providing top tier automotive service in Gulfport

Automotive Mobile Diagnostic Technician

Mobile Diagnostic Technician applying technical knowledge for customer assistance and technology issue resolution. Engaging in customer communication and support for automobile scanning unit.

• Perform visual inspections of water or electric meters for leaks or damage
• Identify hazards at meter sites and report accordingly
• Properly change out water or electric meters of varying sizes and brands
• Properly change out meter registers for AMI/AMR upgrade
• Read electric, gas, or water meters
• Enter data collected in the field into a handheld computer
• Detect location of underground utilities and mark accordingly
• Inspect gas meters and associated piping for proper coatings and evidence of atmospheric corrosion
• Perform visual inspections of gas meters, lines, and fittings
• Grade gas leaks by severity and report escalations accordingly
• Clean and re-coat/paint meters and piping
• Refer all consumer complaints to the appropriate authorities
• Provide general information about the meter services to customers, when applicable
• Use telephones, tablets, and/or computers to communicate
• Participate in company-provided safety meetings

Ready Force Technician installing and maintaining gas, water, and electric meters.

Ready Force Technician I

Ready Force Technician responsible for gas, water, and electric meter installation and maintenance. Must engage in outdoor work and frequent travel across the United States.

• Mosquito Hunters Technicians apply mosquito control products to clients' landscaping
• Participate in marketing initiatives
• Provide a remarkable client experience
• Travel to client's home or business
• Survey each property
• Treat standing water with larvicide
• Perform barrier treatment to surrounding landscaping using a backpack sprayer

Mosquito Hunters Technician applying mosquito control in client's landscaping

Mosquito Control Technician

Mosquito Hunters Technician applying mosquito control products while providing exceptional client experiences. Responsibilities include traveling, surveying properties, and conducting treatments outdoors.

• Ability to travel 100% of the time and also requires working overtime, including working a variable work schedule as needed to meet business goals
• Acts as a safety role model, encourages and recognizes others completing safe acts and intervenes when unsafe acts are being practiced. Adheres to all safety standards and procedures.
• Identifies gaps in safety standards as well as safety risks in the environment, implements effective risk mitigation and provides recommendations to higher level technical staff and management
• Demonstrates and promotes integrity, professional initiative, as well as a no-compromise focus on safety and quality of work on a continuous basis. Also may assist with or perform basic quality audits
• Performs intermediate level wind turbine maintenance and installation tasks as assigned. This includes proficient operation and use of tools (including but not limited to specialized calibration, hydraulic, power tools) and basic turbine equipment.
• Documents tasks where required and enters data into company system, such as SAP
• Effectively gathers information regarding turbine performance / issues. May diagnose, recommend, and implement solutions up to intermediate routine issues. Seeks assistance when encountering turbine issues outside trained skill level to ensure a suitable resolution
• Follows basic structured problem-solving process to complete troubleshooting and diagnostic tasks to include the use of diagnostic tools (e.g. basic fluke meter functions, hydraulic pressure gauge).
• Initiates and performs most work tasks with limited supervision and follows defined instructions and maintenance schedules, completing plans as directed and performs according to written and verbal instruction from higher level technical staff
• Effectively promotes a healthy team environment through assisting teammates in accomplishing goals as well as mentoring lower level technical staff. Visibly supports and promotes team spirit and collaboration, supports change initiatives and looks for improvement opportunities to job-appropriate processes and procedures while communicating through appropriate channels to implements improvements using the appropriate control management protocol
• Interfaces with customer and may respond to customer inquiries. Will refer complex customer inquiries to higher level technical staff or manager. Demonstrates professional customer focus at all times.

Traveling Wind Turbine Technician II role requiring 100% travel

Traveling Wind Turbine Technician II

Traveling Wind Turbine Technician II role performing maintenance and installation tasks with 100% travel across North America. Engaging in safety, teamwork, and customer relations while working on wind turbines.

• Conducts pre-donation medical screening
• Interaction and responsiveness to customer needs
• Assesses donor suitability and engages in set-up
• Provides appropriate feedback to ineligible donor candidates
• Ensures all donor screening information is complete
• Ensures donor confidentiality

Donor Center Technician conducting pre-donation medical screenings at Grifols

Donor Center Technician conducting pre-donation medical screenings at Grifols. Interacting with customers and ensuring donor confidentiality in a plasma center.

• The Mobile Service Technician (MST) is responsible for maintenance and repairs on light construction equipment (skid steers, chippers, trenchers, mini-excavators, etc.) at The Home Depot stores or customer job sites in the vicinity
• Makes routine visits to each store to inspect all equipment, document the status of each unit, perform all required preventive maintenance, and complete work orders for maintenance and repairs
• Trains Home Depot store associates and customers in the proper operation of the equipment and large equipment operating procedures
• Maintain Mobile Elevated Work Platform (MEWP) certifications
• Maintains accurate parts inventory in vehicle or shop location
• Maintains accurate fleet inventory and transfers equipment between locations
• Performs minor repairs on equipment
• Respond to service calls and orders parts needed for equipment maintenance and repairs
• Utilizes company technology platform to document all work performed on equipment, including labor and parts
• Assists with equipment deliveries and pick-ups as required

Mobile Service Technician maintaining light construction equipment for The Home Depot

Mobile Service Technician

Mobile Service Technician responsible for maintenance and repairs of light construction equipment for The Home Depot. Performing inspections and preventive maintenance at stores or customer job sites.

• Electronic component level assembly, bench testing, diagnostics, troubleshooting and/or repair of electronic Line Replaceable Units and processing systems that require the application of a considerable number of different basic but established methods, procedures, and techniques
• Perform duties in an electronics laboratory environment using bench type electronic testing equipment.
• Conducting test and troubleshooting down to the component level for environmental monitoring sensors, data collection and processing systems.
• Using oscilloscopes, Digital Volt Meter, ammeters, pulse/function generators, resistance thermometers and waveform generators.
• Quality work following utilizing provided procedures, drawings and schematics.
• Tasks/assignments that require independent responsibility for following procedures, redline drawings, and time constraints for completing assigned tasks with limited supervision to ensure conformance with established policies, procedures, progress efforts and completion deadlines.

Electronics Technician supporting the National Data Buoy Center's marine observations

Electronics Technician Maintenance III

Electronics Technician supporting the National Data Buoy Center's marine and oceanographic observations. Focusing on electronic assembly, testing, and troubleshooting in a lab environment.

• Candidate must be capable of performing duties at sea within harsh weather environments.
• Requires electronic, electrical and limited mechanical assembly work at the industrial facilities and remote station locations of the NDBC network in support of all operational missions and programs (Weather Buoy, DART, TAO, and C-MAN) as well as considerable travel, including at sea onboard U.S. Coast Guard, NOAA, University, or private vessels.
• Perform field assignments as a member or team leader for installation, troubleshooting, repair and de-installation.
• Experience with the loading and offloading of equipment.
• Knowledge of computer skills Microsoft office suite for completion of test and field related documentation.
• Any other duties as assigned.

Electronics Technician supporting National Data Buoy Center marine environment projects

Electronics Technician Maintenance I – Sea-going

Electronics Technician supporting marine electrical and electronics systems for National Data Buoy Center. Involves performing duties at sea with considerable travel and technical expertise.

• Collaborate with team members to develop the ability to interpret specifications and contract documents accurately.
• Builds foundational knowledge of the mechanical and plumbing systems represented in our drawings.
• Learns the basics of how to read and interpret code.
• Learns the fundamentals of shop drawing creation, file management, and technical communication.
• Strives for proficiency in Revit, Autodesk Fabrication, Navisworks Manage, Bluebeam and other BIM software’s.
• Learn to communicate effectively with internal team members.
• Begins to understand BIMs financial impacts on projects.
• Spend some time in the field to learn what elements lead to successful projects.
• Learn the BOM, fabrication drawing, and Trimble layout basics.
• Adheres to the departmental code of ethics while exemplifying a level of professionalism that appropriately represents the Company.
• Assists in the production of models and shop drawings when directed.

BIM/VDC Technician I assisting with shop drawings at ENFRA

BIM/VDC Technician I

BIM/VDC Technician I at ENFRA developing skills in BIM/VDC processes. Collaborating on shop drawings while gaining foundational knowledge in mechanical and plumbing systems.

Technician jobs in Mississippi

See all jobs on JobTailor

Master Auto Glass Installation Technician

Senior HVAC/Chiller Technician

Controls Technician

Donor Center Technician

Field Technician – Mobile Repairs

Automotive Mobile Diagnostic Technician

Ready Force Technician I

Mosquito Control Technician

Traveling Wind Turbine Technician II

Donor Center Technician

Mobile Service Technician

Electronics Technician Maintenance III

Electronics Technician Maintenance I – Sea-going

BIM/VDC Technician I