Mechanical Engineer

• Design and develop semiconductor test contactors, alignment frames, sockets, and plug-and-play interface solutions.
• Create detailed 3D models, assemblies, drawings, and engineering documentation using SolidWorks.
• Develop designs that meet customer requirements, manufacturability objectives, and reliability targets.
• Support new product introduction (NPI) activities from concept through production release.
• Perform tolerance analyses and mechanical stack-up studies for precision assemblies.
• Develop innovative solutions for complex semiconductor test applications.
• Perform structural, thermal, and motion analyses using SolidWorks Simulation and/or ANSYS.
• Evaluate product performance under production test conditions.
• Analyze design risks and implement corrective actions prior to release.
• Support failure analysis and root cause investigations.
• Generate and maintain engineering drawings, BOMs, specifications, and assembly documentation.
• Manage product data, revisions, and workflows using SolidWorks PDM.
• Support Engineering Change Orders (ECOs) and document control processes.
• Collaborate with manufacturing teams to resolve design and assembly issues.
• Support prototype builds, engineering evaluations, and qualification testing.
• Work with suppliers and internal stakeholders to improve quality, cost, and lead times.
• Implement Design for Manufacturability (DFM) and Design for Assembly (DFA) best practices.
• Communicate project status, risks, and recommendations effectively.

Product Development Engineer

• Architect and lead all electrical aspects of product development from concept through production release
• Define system-level requirements, architecture, interfaces, and design strategies
• Perform component selection, circuit design, schematic capture, and PCB layout oversight
• Analyze design tradeoffs involving performance, reliability, manufacturability, cost, power consumption, and product lifecycle considerations
• Design, develop, troubleshoot, debug, test, and modify complex electronic circuits and embedded hardware platforms
• Develop and review engineering documentation including requirements, architecture, design specifications, verification plans, and manufacturing support documents
• Lead product integration, verification, validation, production support, and sustaining engineering activities
• Create and execute test strategies to ensure product quality, performance, and compliance
• Provide technical leadership on multiple concurrent development programs
• Identify project risks, develop mitigation plans, and communicate status to stakeholders

Principal Electrical Engineer, Wireless Design Services

• Develop conceptual and preliminary process designs for industrial wastewater treatment, reuse, and recycle systems, primarily for Food & Beverage applications
• Define treatment strategies and system configurations based on wastewater characteristics, recovery goals, and discharge or reuse requirements
• Prepare mass balances, process flow diagrams (PFDs), and high-level system layouts
• Develop complete process design packages, including PFDs, P&IDs, hydraulic calculations, and mass and energy balances
• Design full wastewater treatment trains, including pretreatment, core treatment, and post-treatment processes
• Select appropriate treatment technologies and perform unit operation design and equipment sizing
• Generate equipment lists, process design criteria, and support solution costing
• Support project execution through design reviews, commissioning, startup, and system optimization
• Troubleshoot process performance issues and validate system performance in the field
• Serve as a technical resource to sales, service, and implementation teams and support training and mentoring of engineers

Senior Process Design Engineer – Industrial Wastewater

• This position is responsible for performing mechanical engineering work related to the integration of power generation equipment in customer projects in connection with Project System Business.
• Works on project design and development for new or existing products.
• Manage the overall PSB Scope and site / building integration.
• Designs walk-in enclosures and housing for generator sets, KPP, BESS, or other systems as needed
• Define System requirements with clients do or coordinate engineering related to ventilation air flow design including static pressure calculations and sound attenuation but also exhaust, fuel and water piping in accordance with industry codes and standards.
• Develop complete PSB scope from initial ideas to onsite delivery of systems.
• Manage customer requirements and manage design scope and changes.
• Verifies and confirms manufacturing drawings, P&I diagrams, schematics, data sheets and similar drawings for compliance with design specifications.
• Research and analyze requirements from various engineering standards, contracts and proposal documents.
• Prepare engineering calculations and drawings in accordance with applicable codes, contract requirements, while utilizing industry standard/Rolls-Royce Solutions America standards
• Prepare and finalize equipment specifications for major equipment.
• Select effective design concepts and fundamental technology for new products or improvement of existing products
• Review and compare customer specifications against MTU designs and equipment vendor proposals.
• Lead or participate bid leveling exercises on vendor proposals with purchasing
• Complete work according to standard engineering principles and practices.
• Responsible for following RRSA procedures per the company’s quality system.
• Advise and mentor associate engineers.
• Be the Liaison between sales, internal engineering, project management, and vendors
• Create and deliver effective presentations to executive management as well as site teams
• Review control systems and schemes

Application Engineer – Mechanical

• Architect & build internal tools, agentic utilities, and workflow infrastructure
• Reduce friction, eliminating repetitive work, and letting designers focus on user experience
• Design and build high-fidelity, functional prototypes in LLM-powered applications
• Develop a shared prototyping toolkit & end-to-end processes
• Evaluate scaling this work to support composable systems & components
• Raise the bar on craft by bringing finesse-level quality to the insight experiences we ship
• Close the gap between design intent & technical implementation by partnering with production engineers

Staff Design Engineer, Insights

• Viewed as the technical engineer or subject matter expert for the organization in the application of advanced theories, concepts, principles, and processes for an assigned area of responsibility.
• Contributes to the development of new principles and concepts.
• Responsible for major project or several complex projects of moderate to large scope.
• Serves as organization spokesperson on advanced projects and/or programs.
• Acts as advisor to management and customers on advanced technical research studies and applications.
• Works under consultative direction toward broad general goals and objectives.
• Determine and pursue courses of action necessary to obtain desired results.
• May provide work direction for a team of engineers, technicians and other professionals as necessary to complete assignments.

Mechanical Engineer – Staff, Senior or Principal

• Lead the design, development, and optimization of neuro-lead interfaces and implantable medical devices to meet project goals and timelines.
• Collaborate closely with R&D, engineering, and clinical teams to ensure alignment of designs with project objectives , incorporating feedback from clinical trials and user studies.
• Drive innovation by incorporating advanced modeling techniques, staying informed about industry trends, and ensuring the seamless integration of electrical stimulation and modulation techniques into implantable devices.

Senior Mechanical Engineer

• Provide end ‑ to ‑ end ownership of biological safety, materials evaluation, sterilization strategy, and packaging development across the full product lifecycle
• Author and approve Biological Evaluation Plans (BEPs), Biological Evaluation Reports (BERs), toxicological assessments, and supporting documentation
• Develop and maintain sterilization strategies for implantable devices, including EO, gamma, or other validated modalities
• Lead packaging material selection, sterile barrier system development, and packaging design improvements
• Conduct materials assessments, including evaluation of polymers, metals, adhesives, coatings, and surface treatments
• Work closely with cross-functional teams to ensure alignment across programs and provide expert input for global regulatory submissions.

Senior Mechanical Engineer – Biocompatibility, Packaging, Sterilization

• Engineer mobile mechanical systems for oil and gas applications—hydraulic equipment, mobile lifting systems, and field-service machinery.
• Enhance reliability and efficiency for high-pressure, high-load, and high-cycle environments.
• Create detailed CAD models and drawings using Inventor (preferred), Pro-E, or SolidWorks.
• Test and refine equipment to meet API, ASME, and internal quality standards.
• Diagnose field issues, reduce downtime, and drive continuous improvement in system performance.
• Work cross-functionally with design, manufacturing, and field teams to deliver robust, field-ready solutions.

Senior Mechanical Engineer – Remote

• Design of complete building automation systems including the specification and sizing of controllers, electromechanical devices, sensors, networks, and computer hardware
• Creation of sequence of operation for the control of all building systems
• Documentation of BAS design and revision control of resultant documents
• Timely creation of requests for information (RFIs)
• Clear communication and proactive expectation setting with supervisor and project teams
• Comprehend, analyze, and interpret construction plans and specification documents
• Comprehensive knowledge of MEP systems and dynamics
• Ensure engineering processes are followed and make suggestions for enhancement
• Ensure all Automated Logic organizational safety and ethics standards are met

Mechanical Engineer – Building Automation, BAS, MEP

• Work collaboratively across electrical, optical, fluid, and process engineering fields
• Design and analyze mechanical systems to achieve product specifications
• Develop and maintain projects through product conception, definition, design
• Create and present project financial, timeline and technical reports

• Design and develop components and assemblies using SolidWorks CAD software
• Create 3D models, detailed drawings, and engineering documentation for manufacturing
• Support product development activities, including concept generation, prototyping, and design validation
• Collaborate with cross-functional teams including Product Management, Manufacturing, Reliability, Purchasing, and suppliers
• Assist in developing product specifications, timelines, and test plans
• Support prototype builds, testing, and iterative design improvements
• Develop and release production Bills of Materials (BOMs)
• Help resolve design-related issues for existing products in manufacturing and the field
• Travel up to approximately 20% to support supplier visits, prototyping, and production activities
• Follow Mechanical Engineering procedures and contribute to continuous improvement efforts

Mechanical Engineer I

• Serve as the technical certification focal point internally and externally for assigned STC projects
• Develop complete STC design data packages and substantiation documentation required for regulatory approval
• Interpret aircraft designs and define electrical, mechanical, and functional interfaces to support safe avionics installations
• Create and check manufacturing and installation drawings, including kit drawings (AutoCAD preferred)
• Generate required aircraft documentation such as Master Data Lists, Weight & Balance, Electrical Load Analysis, Engineering Orders, and Instructions for Continued Airworthiness (ICA)
• Prepare compliance documents including EWIS, System Safety Assessments, and other certification substantiation artifacts
• Support First ‑ of ‑ Type installations at customer sites, domestically and internationally
• Participate in design reviews (PDR/CDR) to ensure certification requirements are clearly communicated and met
• Collaborate cross ‑ functionally with customers, FAA and foreign authorities, supply chain, quality, program management, and engineering teams
• Clearly communicate technical solutions in both written and verbal form to customers and leadership
• Ensure adherence to Export Control, Technology Control Plans, compliance processes, and company policies
• Knowledge of communication, navigation, surveillance, and data/voice recording avionics systems is a plus

Senior Certification Design Engineer

• Collaborate with Business Development and Creative teams on design, material selections, value engineering, and pricing strategies that will position STAR to win projects.
• Establish and produce cost estimates for proposals, integrating design, graphics, production and services.
• Research new materials and vendors for a given project.
• Lead and provide work direction and guidance to supporting team (Production Engineer, CAD Engineer, Lead Builder, Production Manager, Graphic Project Manager, and outside vendors as needed).
• Manage the planning, organization, documentation, estimates, timelines, and tasks of projects in partnership with Project Management.
• Ensure effective project handoff from Estimating to Production Engineering.
• Complete AutoCAD drawings (2D and 3D, technical, graphic, CNC, and setup) for assigned projects in a timely manner.
• Actively participate in internal project meetings, including project margin and variance reviews, new business production meetings and project debriefs.
• Complete daily reporting responsibilities.

Design Engineer

• **Overview**Join a team that’s redefining mechanical innovation in the oil and gas sector. As a **Senior Mechanical Engineer**, you’ll lead the design, optimization, and validation of advanced mobile mechanical systems that power drilling, completions, well intervention, and field operations. This role blends hands-on engineering with creative problem-solving—perfect for an engineer who thrives on turning complex challenges into reliable, high-performance solutions.
• **Location:** Remote within the Midwest (MN, WI, IL, IA, MO, KS, TX, OK, AR, LA) **Travel:** ~10% annually to customer sites and fabrication facilities **Industry:** Industrial, Petrochemical, and Heavy Equipment Systems

Mechanical Engineer jobs in Minnesota

See all jobs on JobTailor

Product Development Engineer

Principal Electrical Engineer, Wireless Design Services

Senior Process Design Engineer – Industrial Wastewater

Application Engineer – Mechanical

Staff Design Engineer, Insights

Mechanical Engineer – Staff, Senior or Principal

Senior Mechanical Engineer

Senior Mechanical Engineer – Biocompatibility, Packaging, Sterilization

Senior Mechanical Engineer – Remote

Mechanical Engineer – Building Automation, BAS, MEP

Senior Mechanical Engineer

Mechanical Engineer I

Senior Certification Design Engineer

Design Engineer

Senior Mechanical Engineer