Electrical Engineer

• Architect, lead, and deliver state-of-the-art avionics, electrical weapon interfaces, and custom/COTS Line Replaceable Units (LRUs) for missile systems, Unmanned Aerial Vehicles (UAVs), and fieldable launch platforms
• Support complex system co-designs utilizing high-performance Xilinx/AMD Zynq SoCs, Altera FPGAs, soft-core processors (MicroBlaze), and complex network architectures (bare-metal, RTOS-based, UDP/IP stacks, and Weapon Open System Architecture/WOSA messaging frameworks)
• Oversee complex Multi-Layer Power Distribution Network (PDN) definitions, multi-rail low-noise regulation circuits, rigid-flex PCBA layouts, and high-speed digital interfaces (PCIe, multi-Gbps transceivers, ADCs/DACs, and RF modems)
• Direct multi-disciplinary Integrated Product Teams (IPTs) for electronics, cabling, grounding, and bonding
• Act as the primary internal technical authority, hosting weekly technical interchange meetings with external subcontractors to maintain design consistency
• Partner with systems engineering teams to translate military standards into rigorous hardware requirements
• Support Control Account Managers (CAMs) by providing precise technical write-ups, work breakdowns, and schedule estimates for Earned Value Management (EVM), CapEx initiatives, and major competitive proposals
• Act as a certified test conductor or lead verification engineer to establish comprehensive system-level test plans, environmental stress screening, HWIL integration, and launch-readiness countdown actions

Lead Electrical Systems Engineer

• Architect, lead, and deliver state-of-the-art avionics, electrical weapon interfaces, and custom/COTS Line Replaceable Units (LRUs) for missile systems, Unmanned Aerial Vehicles (UAVs), and fieldable launch platforms.
• Support complex system co-designs utilizing high-performance Xilinx/AMD Zynq SoCs, Altera FPGAs, soft-core processors (MicroBlaze), and complex network architectures (bare-metal, RTOS-based, UDP/IP stacks, and Weapon Open System Architecture/WOSA messaging frameworks).
• Oversee complex Multi-Layer Power Distribution Network (PDN) definitions, multi-rail low-noise regulation circuits, rigid-flex PCBA layouts, and high-speed digital interfaces (PCIe, multi-Gbps transceivers, ADCs/DACs, and RF modems).
• Direct multi-disciplinary Integrated Product Teams (IPTs) for electronics, cabling, grounding, and bonding.
• Act as the primary internal technical authority, hosting weekly technical interchange meetings with external subcontractors to maintain design consistency.
• Partner with systems engineering teams to translate military standards into rigorous hardware requirements.
• Support Control Account Managers (CAMs) by providing precise technical write-ups, work breakdowns, and schedule estimates for Earned Value Management (EVM), CapEx initiatives, and major competitive proposals.
• Act as a certified test conductor or lead verification engineer to establish comprehensive system-level test plans, environmental stress screening, HWIL integration, and launch-readiness countdown actions.

• Lead electrical engineering technical work for complex projects.
• Track project progress, including scope, schedule, and fee.
• Oversee technical review and provide high quality deliverables.
• In depth knowledge for team guidance of models, plans, details, and drawings of electrical engineering systems and components according to established standards and modeling techniques.
• In depth knowledge for team guidance of electrical design for various systems including medium-voltage distribution, microgrids, photovoltaic, battery systems, building power systems, lighting design, and low voltage systems.
• In depth knowledge for team guidance of electrical calculations including SKM analysis, arc flash, and photometric calculations (AGI or Elumtools preferred).
• Support career development and technical skill advancement of team members.
• Motivate and inspire team members.
• Communicate complex technical information to non-technical stakeholders.
• Foster a collaborative team culture with a focus on innovation and excellence, where team members are encouraged to push boundaries and think creatively.
• Manage project and staffing plans, adjusting them as necessary to meet changing project needs.
• Oversee engineering project phases from initiation to completion, ensuring projects are completed on time, within budget, and meet quality standards.
• Serve as a technical expert and discipline representative at various meetings and events as required.
• Deliver presentations at conferences, networking events, and professional organizations to highlight the distinctive and innovative services Woolpert offers to clients.
• Conduct training sessions for internal employees when necessary.

Senior Electrical Engineer

• Perform Short circuit, coordination, and arc flash studies for commercial, industrial, education, healthcare, and generation facilities using SKM, ETAP, and/or Easypower software.
• Applies knowledge of low and medium-voltage switchgear, motor control centers, circuit breakers, panel boards, and disconnects to determine cost-effective mitigation solutions from the results and recommendations of power system studies.
• Develop study reports and communicate results and recommendations to customers.
• Perform data collection activities.
• Develop and/or implement arc flash mitigation designs.
• Interpret new construction drawing packages.
• Develop relay protective setpoints and settings files.
• Develop and/or update equipment control schematics, one-lines, three-lines, and wiring diagrams.
• Working on project teams supporting all quality and project management goals.
• Meeting all project deadlines and supporting the processes and procedures to meet deadlines.
• Maintaining up-to-date technical skills related to the design of electrical substations and protection and control schematics for the electric utility power grid through on-the-job work and formal training.
• Successfully execute small to medium-sized projects with limited oversight.
• Self-manage assigned projects and job cost accountability to perform work within budgeted cost estimates.
• Effectively communicate with other departments and customers to ensure activities are properly coordinated.

Engineer III – Electrical

• Coordinates project start-up by engaging in the following: reviews owner contract, assists with development of startup checklist and site utilization plan, coordinates mobilization, assists with subcontractor & vendor selection, identifies critical issues & milestones, finalizes Prolog set up, participates in development of construction schedule, and participates in subcontractor project orientation
• Expedites materials by engaging in the following: develops submittal log, establishes fabrication & delivery schedule, confirms delivery of materials, conducts submittal/SD review process, reviews coordination drawings, monitors materials stored off site, coordinates owner furnished materials, and verifies fabrication status
• Coordinates construction activities by engaging in the following: strategizes with Superintendent, conducts subcontractor pre-construction meetings, maintains activity tracking logs, participates in schedule updates, conducts quality control inspections, verifies field installations, ensures compliance with safety procedures and policies, coordinates storage of delivered materials, participates in daily superintendent meetings, participates in jobsite meetings, maintains material expediting log, participates in project team visits, coordinates activities with user groups, and assists with agency inspections
• Facilitates project administration by engaging in the following: expedites subcontractor and vendor agreements, assists with subcontractor and vendor insurance and bond agreements, prepares meeting agendas and minutes, assists with managing check-hold list, maintains jobsite files, processes progress photos, assists with preparation of project status reports, coordinates activities with project staff, maintains Prolog, generates correspondence, administers RFI process, and ensures compliance with company policies and procedures
• Tracks project costs by engaging in the following: processes subcontractor and vendor pay requests, assists with tracking owner payments, tracks subcontractor back charges, and updates labor cost reports
• Supports management for change order process by engaging in the following: creates change requests, reviews scope changes, determines schedule impacts, issues owner notification, expedites subcontractor and vendor pricing, prepares cost proposal, and negotiates proposal costs
• Perform other duties as assigned

Field Project Engineer, Electrical

• Manages, mentors and develops local electrical team
• Completes multiple or complex electrical designs to support firm-wide projects by working with Project Managers (any discipline) and electrical teammates (firm-wide)
• Manages review and provides oversight of design calculations, design drawings, procurement specifications, and construction specifications
• Leads projects involving multiple or complex design calculations, design drawings, and project specifications for the following but not limited to: Medium/low voltage power distribution systems, Electrical equipment design (including switchboards and switchgear), Lighting systems, Lightning protection systems, Grounding systems, Communications systems, Electrical calculations, selective coordination and arc flash studies
• Prepares detailed large contract documents, studies and cost estimates
• Performs submittal reviews and construction observations for electrical work on projects
• Assists in and adheres to companywide Quality Assurance and Quality Control processes
• Assists in NAVFAC and other DoD projects company wide
• Meets with clients, utilities, and other parties to investigate site conditions/third party interface requirements for the project
• Works with other disciplines to support and develop project pursuits and work
• Supports work in Tampa, Jacksonville, and the Caribbean. Travels as needed typically no more than 10-15%
• Supports firm-wide electrical needs, projects and assignments as needed and participates in related meetings

Senior Electrical Engineer/Manager – Power Systems

• Responsible for all sizes and types of projects from concept to completion of construction
• Lead the project in all facets by interfacing with clients
• Provide technical excellence
• Manage the project team and schedule to achieve a successful project outcome

Electrical Project Engineer – Healthcare

• Provide technical expertise and leadership to implement and execute asset integrity strategies at operating sites.
• Work closely with Operations, Maintenance, and Reliability personnel to monitor asset reliability results and address issues hindering reliability.
• Provide electrical engineering, reliability, and process subject matter expertise to a team of peers.
• Responsible SME for electrical infrastructure equipment, coordinate power system study activities, complete minor updates to power system models, conduct audits and inspections.
• Identify deficiencies in maintenance processes and develop sustainable improvement.
• Apply and optimize PM / PdM activities to drive improvement in asset mean time between failures.
• Provide prioritized asset assessments that support the 5-year capital planning process.
• Assist with supervision of field service contractors.

Electrical Reliability Engineer II, III, Senior

• Involved with the design, development, modification and analysis of various electronics systems.
• Troubleshoot and diagnose malfunctions in existing products or systems and makes modifications as needed.
• Compile and evaluate design and test data.
• Analyze, develop and recommend design approaches.
• Responsible for technical activity and completion of assigned task on time and budget.
• Design, develop, analyze, document and support testing of products, systems or subsystems.
• Report of progress and status regularly.
• Review customer specifications and requirements, and develop designs to best support them.
• Specify and evaluate supplier components, subsystems and services.
• Develop prototypes to retire key development risks.
• Communicate clearly (written and oral) with other company personnel and the customer as required.
• Support, communicate, reinforce and defend the mission, values and culture of the organization.

Electrical Engineer II

• Lead discipline design for medium and large projects, with limited Revit use.
• Delegate moderate to complex tasks and provide technical oversight.
• Review and approve complex designs, calculations, and simulations.
• Review high-level product submittals and shop drawings.
• Provide detailed responses to complex RFIs.
• Conduct targeted site visits to resolve critical field issues.
• Prepare technical reports and documentation.
• Participate in project meetings as a senior technical advisor.
• Ensure project delivery meets schedule, quality, and budget targets.
• Develop project workplans and adjust as needed for scope changes.
• Mentor engineers at all levels on technical best practices.

• Collects and prepares data/information and performs engineering calculations.
• Responsible for the production of drawings that are of high quality consistent, complete, and accurate.
• Develops technical specifications & data sheets.
• Assists in field work, checking installations, and problem solving activities.
• Performs calculation checking and vendor drawing reviews.
• Interacts with other departments and suppliers to obtain pertinent information.
• Knowledgeable in the design of electrical systems including lighting, power, life safety, security, and communication systems for commercial buildings.
• Confers with project staff for resourcing availability.
• Coordination between all A/E disciplines on a project.
• Ensure project progresses on schedule and within prescribed budget.
• Assist in the preparation of project reports for management, client, or others.
• Confers with project personnel to provide technical advice and to resolve problems.
• Coordinates project activities with activities of government regulatory or other governmental agencies.
• Construction administration, shop drawings review, response to request for information.
• Expands the company’s engineering breadth by growing and maintaining client relationships.

Power Systems Engineer

• Contribute and support Power, Lighting, Grounding, Lightning Protection, Fire Alarm, and Systems or Low Voltage Engineering efforts
• Execute design duties as required to ensure quality is always maintained
• Lead and mentor subordinate staff in expanding their capabilities and contributions
• Prepare panelboard and equipment schedules
• Perform system calculations and sizes and selects system components
• Review shop drawing submittals and travel to job sites to perform field verification

• Lead a team of engineers and manage client relationships
• Select and specify substation equipment
• Develop physical electrical design submittals
• Prepare equipment specifications, bid evaluations, and procurement recommendations
• Coordinate with clients and project management teams
• Mentor less experienced engineers and designers
• Manage multiple projects simultaneously and adhere to budget, schedule, and quality requirements
• Develop engineering cost estimates for proposals

Lead Physical Electrical Engineer

• Plan and perform assigned engineering tasks within the framework of safety, quality, delivery and cost (SQDC)
• Collaborate with leaders in identifying and setting challenging goals for each rotation
• Complete technical training with mentorship and coaching from world-class engineers and experienced technical leaders
• Demonstrate an ability to understand and apply engineering fundamentals to solve real world problems while managing multiple priorities
• Identify and share best practices regarding new analyses, techniques and methodologies
• Incorporate LEAN principles into your standard work

Edison Engineering Development Program – Systems, Electrical Engineering

• Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern or co-op!
• You’ll build professional and technical skills in an aerospace systems & defense role working on challenging, real-world problems to design aerospace systems for commercial and military applications & support through service life.
• Build relationships with interns/coops and leaders and prepare for a potential full-time position after graduation in one of our fantastic leadership programs or a direct hire opportunity.
• You will gain broad exposure to the engineering field with an array of opportunities ranging from design & analysis to working hands-on with aerospace systems.
• Responsibilities may include design, analysis, development, and testing, writing software requirements, software testing, simulation, tool development and product/program support.

Systems Engineering Co-op – Electrical Engineering, Computer Engineering, Avionics

• Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern or co-op!
• You’ll build professional and technical skills in an aerospace systems & defense role working on challenging, real-world problems to design aerospace systems for commercial and military applications & support through service life.
• Build relationships with interns/coops and leaders and prepare for a potential full-time position after graduation in one of our fantastic leadership programs or a direct hire opportunity.
• Gain broad exposure to the engineering field with an array of opportunities ranging from design & analysis to working hands-on with aerospace systems.
• Responsibilities may include design, analysis, development, and testing, writing software requirements, software testing, simulation, tool development and product/program support.

Systems Engineering Co-op – Electrical Engineering, Computer Engineering, Science

• Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern or co-op!
• Build professional and technical skills in an aerospace systems & defense role working on challenging, real-world problems to design aerospace systems for commercial and military applications & support through service life.
• Build relationships with interns/coops and leaders and prepare for a potential full-time position after graduation in one of our fantastic leadership programs or a direct hire opportunity.
• Gain broad exposure to the engineering field with an array of opportunities ranging from design & analysis to working hands-on with aerospace systems.
• Responsibilities may include design, analysis, development, and testing, writing software requirements, software testing, simulation, tool development and product/program support.

Systems Engineering Intern – Electrical Engineering, Computer Engineering

• responsible for the electrical design and coordination of various projects focusing on medium and low voltage power distribution, motor controls, lighting, and grounding for water/wastewater projects
• provide leadership, technical knowledge, and guidance to electrical staff
• manage projects/tasks budgets and delivery schedules
• balance team workload for multiple assignments
• support business development and prepare scopes, schedules, and budget for new projects
• work in multi-discipline teams
• establish design criteria and perform design calculations
• conduct field inspections and oversee projects in construction
• perform system analysis using ETAP, SKM Power Tools or other power systems analysis software
• collaborate with practice leadership and participate in regional/national conferences

Principal Electrical Engineer

• Lead the full lifecycle development of electrical hardware subsystems for Power Tool platforms, from early concept and prototyping through verification, release, and post‑market support.
• Own, define, and evolve the electrical system architecture for Power Tool platforms, including motor controllers, power distribution, and safety circuits.
• Define component‑level and system‑level electrical requirements, interfaces, and design standards aligned with clinical use, regulatory requirements, and business objectives.
• Provide hands‑on technical leadership in schematic design, PCB layout reviews, design trade studies, and root‑cause analysis of complex system‑level issues.
• Lead the electrical design, integration, and verification of power tools and subsystems, including motor, controller, charger, and batteries.
• Oversee the development of real‑time control hardware, deterministic communication networks (e.g., LINbus, UART), and high‑reliability power architectures used in surgical Power Tools.
• Drive designs that meet requirements for safety, reliability, EMI/EMC compliance, manufacturability, serviceability, scalability, and cost efficiency.
• Ensure electrical systems comply with applicable medical device standards and regulations, including IEC 60601-1, ISO 13485, and FDA requirements.
• Support and lead design reviews, risk management activities (FMEA), verification and validation (V&V), and design history file (DHF) documentation.
• Partner cross‑functionally to support architectural decisions, system improvements, and continuous enhancement of overall power platform performance.
• Lead and participate in architecture reviews, design reviews, and cross‑disciplinary technical trade‑off discussions.
• Support design transfer, manufacturing readiness, and product launch activities.
• Participate in complaint investigations, post‑market surveillance, and controlled software updates.
• Build, mentor, and retain a high‑performing electrical engineering team.
• Identify project critical paths, proactively manage risks, and facilitate cross‑functional problem solving.
• Support resource planning, staffing, and schedule estimation.
• Communicate risks, opportunities, and execution status clearly to senior leadership.
• Foster a culture of technical excellence, accountability, ownership, and continuous improvement.
• Communicate business‑related issues, risks, and opportunities to senior management in a timely and effective manner.
• Interface with regulatory, quality, and manufacturing teams to support audits and inspections.
• Responsible for communicating business-related issues or opportunities to next management level.
• Responsible for ensuring that subordinates follow all Company guidelines related to Health, Safety and Environmental practices and that all resources needed to do so are available and in good condition, if applicable.
• Responsible for ensuring personal and Company compliance with all Federal, State, local and Company regulations, policies, and procedures.
• Identify critical paths during product development, address bottlenecks and risks and facilitate problem solving across R&D teams.
• Support project resource and schedule planning.
• Performs other duties as assigned.

Electrical Engineering Manager – Power Tools

• Lead the full lifecycle development of electrical hardware subsystems for Power Tool platforms, from early concept and prototyping through verification, release, and post‑market support.
• Own, define, and evolve the electrical system architecture for Power Tool platforms, including motor controllers, power distribution, and safety circuits.
• Define component‑level and system‑level electrical requirements, interfaces, and design standards aligned with clinical use, regulatory requirements, and business objectives.
• Provide hands‑on technical leadership in schematic design, PCB layout reviews, design trade studies, and root‑cause analysis of complex system‑level issues.
• Lead the electrical design, integration, and verification of power tools and subsystems, including motor, controller, charger, and batteries.
• Oversee the development of real‑time control hardware, deterministic communication networks (e.g., LINbus, UART), and high‑reliability power architectures used in surgical Power Tools.
• Drive designs that meet requirements for safety, reliability, EMI/EMC compliance, manufacturability, serviceability, scalability, and cost efficiency.
• Ensure electrical systems comply with applicable medical device standards and regulations, including IEC 60601-1, ISO 13485, and FDA requirements.
• Support and lead design reviews, risk management activities (FMEA), verification and validation (V&V), and design history file (DHF) documentation.
• Partner cross‑functionally to support architectural decisions, system improvements, and continuous enhancement of overall power platform performance.
• Lead and participate in architecture reviews, design reviews, and cross‑disciplinary technical trade‑off discussions.
• Support design transfer, manufacturing readiness, and product launch activities.
• Participate in complaint investigations, post‑market surveillance, and controlled software updates.
• Build, mentor, and retain a high‑performing electrical engineering team.
• Identify project critical paths, proactively manage risks, and facilitate cross‑functional problem solving.
• Support resource planning, staffing, and schedule estimation.
• Communicate risks, opportunities, and execution status clearly to senior leadership.
• Foster a culture of technical excellence, accountability, ownership, and continuous improvement.
• Communicate business‑related issues, risks, and opportunities to senior management in a timely and effective manner.
• Interface with regulatory, quality, and manufacturing teams to support audits and inspections.
• Responsible for communicating business-related issues or opportunities to next management level.

Electrical Engineer jobs in Florida

See all jobs on JobTailor

Lead Electrical Systems Engineer

Lead Electrical Systems Engineer

Senior Electrical Engineer

Engineer III – Electrical

Field Project Engineer, Electrical

Senior Electrical Engineer/Manager – Power Systems

Electrical Project Engineer – Healthcare

Electrical Reliability Engineer II, III, Senior

Electrical Engineer II

Senior Electrical Engineer

Power Systems Engineer

Electrical Engineer

Lead Physical Electrical Engineer

Edison Engineering Development Program – Systems, Electrical Engineering

Systems Engineering Co-op – Electrical Engineering, Computer Engineering, Avionics

Systems Engineering Co-op – Electrical Engineering, Computer Engineering, Science

Systems Engineering Intern – Electrical Engineering, Computer Engineering

Principal Electrical Engineer

Electrical Engineering Manager – Power Tools

Electrical Engineering Manager – Power Tools